Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bedford
Most gate failures in Bedford come down to two things: age and clay soil. The wooden privacy gates and wrought-iron driveway gates across this city were largely installed between 1975 and 1993, which means they’re now 30 to 50 years old and failing on a predictable schedule. Add Tarrant County’s expansive clay that swells in wet winters and shrinks through summer droughts, and you get hinge posts that tilt, gates that drag, and latches that stop catching. Our Gate Parts & Welding team handles hinge replacement, post replacement, rail repair, custom welding, gate rollers, and latch and lock work across Bedford every week. If your gate won’t close or won’t stay square, call us at (254) 330-8718. We’ll quote the job before we start and stand behind the work in writing.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Parts & Welding Company
We’ve been at this trade for over 42 years, and Bedford homeowners tell us the same thing: they want a company that answers the phone, shows up when it says it will, and fixes the gate without inventing new problems. A live person answers our calls 24 hours a day, 7 days a week. Not a voicemail tree, not a callback queue. When a gate drops off its hinges on a Saturday morning, you talk to a person, not a recording.
Victor Salinas leads our team, and every technician who comes to your Bedford home is background-checked and uniformed. We work the way we’d work in our own mother’s driveway. That’s the standard, and it’s been the standard since 1984. We carry parts for the gate motors and hardware Bedford homes actually have, so most hinge, roller, and latch replacements happen in a single visit.
Every job we complete is covered by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions. We also offer a free second opinion on any written estimate you’ve received from another company. Bring us the quote, and we’ll tell you honestly whether it’s fair.
Our Gate Parts & Welding Services in Bedford
Hinge Replacement
Original hinges on Bedford’s 1975-1993 gates were often light-duty hardware that was never meant to carry a gate for 40 years. On Harwood Road and the established sections near Central Drive, we routinely pull off hinges that are corroded through or seized solid. We replace them with heavy-duty ball-bearing units sized to the gate’s actual weight, and we re-set the post if the clay has moved it. A hinge replacement that ignores the post movement won’t last; we fix both.
Post Replacement
This is the most Bedford-specific repair we do. Tarrant County’s expansive black clay swells in wet winters and contracts in dry summers, which slowly heaves and tilts the post footings under older gates. The gate didn’t sag on its own; the ground moved underneath it. We dig out failed posts, pour new footings at 30 inches minimum, and set the post plumb and square before re-hanging the gate. Done this way, the gate closes like it did when the house was new.
Rail Repair
Wooden privacy gates in Bedford’s ranch-home neighborhoods take a beating from spring storm winds and years of post movement. The top and bottom rails crack at the hinge attachment points, and corners sag. We repair or replace rotted rails, add welded steel reinforcement plates where the frame is weak, and re-square the gate so it stops dragging on the driveway or lawn.
Custom Welding
Wrought-iron driveway gates on the larger lots off Harwood Road and Central Drive can’t be fixed with off-the-shelf brackets. Cracked stiles, broken pickets, snapped latch mounts. Those need a welder who understands ornamental iron, not a handyman with a drill. We weld in place when the damage is contained, or remove the gate to our shop for more involved structural work. Either way, the repair is measured, cut, and welded to match the original lines.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
If your gate has an opener, we’re trained and equipped on nine major automation brands for our Gate Motor & Opener in Bedford, including FAAC, BFT, Linear, and Viking, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because the correct fix on the first visit depends on knowing the specific brand’s wiring, limits, and control board behavior. We stock common parts for these brands and can get most replacement boards and arms quickly, which keeps Bedford repairs moving without a second trip across the Metroplex.
Common Gate Parts & Welding Problems We See in Bedford Homes
- August gate drag: Gates that latched fine all spring start dragging on the ground every August. Summer drought contracts the clay, the hinge post tilts, and the latch side drops. We see this surge every year, almost on schedule.
- Corroded wrought-iron hinges near Central Drive: Original iron hinges on 1970s and 1980s driveway gates seize or snap under spring high-wind stress. When they do, the gate sags hard and the latch stops lining up.
- Rotted wooden gate posts: Cedar and pressure-treated posts set in the 1975-1993 build-out have absorbed decades of wet-dry soil cycles. The wood rots at ground level, and the whole gate leans.
- Cracked gate frame welds: Wrought-iron gates crack at the corners and stiles after years of flexing against a shifting post. The crack widens until the gate visibly drops.
Pricing for Gate Parts & Welding in Bedford, TX
Honest numbers help you plan. In Bedford, a typical hinge replacement on a wooden privacy gate runs $180-$340 including hardware and labor. Post replacement, with excavation of the old footing and a new 30-inch concrete pour, runs $325-$650 per post depending on gate width and soil conditions. Custom welding on a wrought-iron driveway gate typically runs $150-$400 for in-place repairs like cracked stiles or snapped latch mounts, and more if the gate must be removed for shop work. Rail repair on a sagging wooden gate runs $140-$280. Every quote is written and agreed before we touch a bolt. Call (254) 330-8718 for a free estimate, and remember we offer $50 off any repair over $250, plus a permanent 5% discount for seniors and veterans.
We Also Serve Cities Near Bedford
Our Gate Parts & Welding in Bedford coverage extends to the surrounding Mid-Cities communities of Hurst, Colleyville, North Richland Hills, and Southlake. The soil and housing stock are similar across this corridor, so the same fixes apply. If you’re just outside Bedford, call and ask; we likely have a crew nearby.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bedford
Your gate isn’t failing. The soil under it is moving. Bedford sits on expansive black clay that swells in wet winters and contracts in summer drought. As it contracts, the post footings tilt outward, dropping the latch side of the gate. It’s a seasonal pattern we see every August and September across Bedford’s 1970s and 1980s neighborhoods. The fix is resetting the post in a deeper, wider footing, not shaving the gate. Call (254) 330-8718 and we’ll confirm it on site.
Many cracks can be welded in place. A cracked stile or a broken latch mount on a driveway gate is often repairable without removing the gate from its hinges, provided the gate is still structurally square. If the crack has spread into the frame corners or the gate is badly out of square, we remove it, fixture it in our shop, and weld it properly. We’ll tell you which one your gate needs before we start, and the price is set then, not after.
For a wrought-iron driveway gate off Harwood Road, we recommend heavy-duty ball-bearing hinges sized to the gate’s full weight, not light-duty strap hinges. The originals were typically undersized for the weight they carried, and corrosion finished the job. Ball-bearing hinges spread the load and won’t seize in the first wet spring. We’ll match the hinge footprint to your existing post and gate so the repair doesn’t leave mismatched holes.
Usually the frame is intact, but the hinge post has moved and the top rail has cracked at the hinge attachment point. Over 30 to 50 years, the post twists in the clay and the rail takes the torsional load until it splits. We re-set the post, replace or sister the cracked rail, and add a welded steel reinforcement plate so the repair outlasts the next drought cycle. You get a gate that closes square and latches cleanly.
Yes. Some Bedford properties, especially larger lots with long driveways, use solar-powered operators where running conduit for mains power would mean trenching a hundred feet or more. We service solar operators and install loop detectors and safety edges to meet current code. We’re trained on FAAC, BFT, Linear, Viking, and other major brands, so the wiring and Gate Access Control in Bedford work is handled correctly the first time. Call (254) 330-8718 for a free estimate.
Bedford’s Aging Gates Need More Than a New Part
Here’s the reality we work with every day in Bedford. This city is essentially built out. Almost all of its residential neighborhoods went up between the mid-1970s and early 1990s, and most of those homes still have their original wooden privacy fence gates or wrought-iron driveway gates. Those gates are now 30 to 50 years old, and they’re reaching end-of-life at the same time, house after house, street after street. Bedford’s gate repair market isn’t Gate Installation - Bedford. It’s rehabilitation of one aging housing cohort, and the work is compounded by something builders of that era didn’t fully account for: Tarrant County’s expansive black clay.
The clay here swells in wet winters and spring rains, then shrinks and cracks through long dry summers. That movement heaves post footings, tilts hinge posts, and pulls gates out of square. A homeowner off Harwood Road called us because their wrought-iron driveway swing gate was dragging on the concrete and wouldn’t latch after a dry August. Our tech found the hinge post had tilted nearly two inches as the clay contracted, pulling the gate out of square. We reset the post in a new 30-inch concrete footing, replaced the original corroded hinges with heavy-duty ball-bearing units, and re-welded a cracked stile so the gate closed square and latched cleanly before the next rain.
That’s the Bedford-specific repair we do. We account for the clay, not just the broken part. Every repair from our Gate Parts & Welding team is built around the soil cycle, the age of the gate, and the way the gate was originally installed. Not a generic fix. The right fix, for the ground your gate stands on.
Call Ironworks Gate Co. for Gate Parts & Welding in Bedford
If your gate is dragging, sagging, rusted through, or won’t latch, call us at (254) 330-8718. A live person answers, day or night. We’ll schedule a visit, quote the repair in writing before any work starts, and complete most hinge, roller, latch, and welding jobs in a single visit. The price we quote is the price you pay. Every job carries our written 90-Day Done Right Promise. And if you’ve got a written estimate from another company, bring it in for a free second opinion. We’ve been standing behind our work for over 42 years. We’ll stand behind yours too.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford and the Mid-Cities since 1984.