Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haltom City
Gate parts and welding in Haltom City isn’t a side job for us. It’s what we’ve done for over 42 years, and around here the work runs the full range: a sagging ornamental iron driveway gate on a 1960s ranch off Watauga Road one hour, a sliding chain-link gate at an auto yard near the BNSF rail corridor the next. If a hinge post has leaned out of plumb, a roller’s ground itself flat, or a weld has finally let go, call us at (254) 330-8718. We schedule fast, quote the price before any work starts, and put our 90-Day Done Right Promise in writing.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Parts & Welding Company
Haltom City is a dense working town, roughly nine square miles of older ranch homes, machine shops, salvage yards, and light manufacturing. That shape changes the kind of gate work a technician sees. We don’t just get ornamental iron and wood fence gates here like the suburbs to the north. We get industrial slide gates with high-cycle operators and rollers that take abuse all day, five and six days a week. We get post footings that were poured shallow in the 1960s and have been moving in Vertisol clay ever since. Knowing the difference between a residential hinge replacement and a commercial rack-and-pinion realignment is the difference between a fix that lasts and one that gets called back in six months.
Our Gate Parts & Welding team comes to Haltom City with the truck stocked for both worlds: hinge sets, latch hardware, post steel, welding rigs, rollers, track sections, and a full bench of automation parts. Victor Salinas founded this company on a simple rule: the 400th job gets the same care as the first. We stand behind that with a written promise. If it isn’t right, we come back and make it right. No argument, no paperwork chase, no exceptions.
Our Gate Parts & Welding Services in Haltom City
Gate Rollers
Rollers fail hard in Haltom City because so many gates here work for a living. On the industrial pockets off Denton Highway and near the rail corridor, sliding gates cycle dozens of times a day with heavy truck vibration constantly rattling the hardware. Rollers wallow out, track sections spread, and the operator starts faulting on every open. We replace rollers, re-set track, and re-align the rack so the motor stops fighting the gate. For residential swing gates, worn rollers put drag on the entire leaf, which translates to hinge wear and eventually a dead opener.
Post Replacement
The clay under Haltom City is the culprit behind most post failures. Tarrant County’s black Vertisol soil swells in wet winters and shrinks in baking summers, and over decades that cycle works posts out of plumb inch by inch. A gate that used to swing freely starts dragging, the latch misses the strike, and the operator labors or strips a gear. We re-set posts in deeper footings with proper concrete, and when the old post steel is rotted at the base, we weld in new. It’s not a cosmetic fix. It’s a footings fix, which is the only fix that survives the next wet spring.
Rail Repair
Ranch-style wrought iron gates around 76117 were often built as welded rails with pickets. Forty or fifty years of North Texas heat, rain, and occasional impact takes a toll at the weld joints. We cut out the failed section, weld in new steel, and match the profile so the repair doesn’t announce itself as a patch. For chain-link slide gates, rail repair usually means straightening or replacing damaged top and bottom rail before installing new fabric. Either way, the gate needs to track straight and true after we leave.
Custom Welding
Not every gate problem is a replacement part. Sometimes a gate was built for a different opening, or a section was hit by a vehicle, or the homeowner wants to reinforce a sagging frame. We weld on-site in Haltom City, no need to haul the gate to a shop. That matters on long driveways and at commercial lots where removing a gate means leaving the property open overnight. Custom welding covers hinge reinforcement, frame repairs, post caps, gate widening, and fabrication of brackets or stops that were never installed in the first place.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re certified across nine opener brands, and in Haltom City we see plenty of LiftMaster, FAAC, and DoorKing units on the commercial side, with Elite and Mighty Mule common on residential driveways. Our trucks carry the wear parts these brands need most: limit switches, gears, control boards, and photo eye retrofits. That means most calls in Haltom City are resolved the same day, not scheduled out for a second visit after a part arrives. If you’re not sure what’s on your gate, call and describe the motor housing. We’ll likely know what you have before we pull into the driveway.
Common Gate Parts & Welding Problems We See in Haltom City Homes
- Post lean from clay soil movement: Haltom City’s Vertisol clay expands and contracts seasonally, and posts set in shallow or undersized footings walk out of alignment. This shows up as latch miss, gate drag, and hinge post fatigue that eventually snaps the weld at the post base.
- Worn rollers and track on commercial slide gates: The auto yards and light industrial shops along Denton Highway and the BNSF rail corridor cycle their gates constantly. Rollers flatten, track separates, and the rack and pinion skips until the operator trips a fault every cycle. A roller replacement here is a same-day job we’ve done hundreds of times.
- Hinge failure on original 1950s-1970s ranch gates: Many Haltom City homes still carry the original wrought iron gate hung at construction. Hinges wear egg-shaped, the gate sags, and the leaf starts dragging on the latch post. Replacing the hinge before the weld tears out is far cheaper than rebuilding the gate corner.
- Long driveway power gaps: On larger lots and rural-edged properties around the city, mains power doesn’t always reach the gate. We install solar panel and battery packages sized to the opener, and we run DC cached operators for LiftMaster and other brands where solar is the only practical answer.
Pricing for Gate Parts & Welding in Haltom City, TX
In Haltom City specifically, here’s what our customers typically see. Gate roller replacement runs $180 to $420 depending on whether it’s a single residential V-roller set or a commercial slide gate needing track and rack work. Hinge replacement on a standard residential swing gate runs $220 to $480, which includes the new hinge hardware and welding out the old. Post replacement is the wider range: $350 to $900 depending on depth, whether we’re setting new concrete, and if the post needs to be welded into an existing gate frame. Custom welding is quoted by the hour at $95 to $140 plus materials. Every price is settled up front in writing before a single bolt is turned. Call (254) 330-8718 for an exact quote. Estimates are free.
One Call That Shows What We Mean
We ran a call on a sliding chain-link gate at an auto yard off Denton Highway, near the BNSF tracks. The operator had been faulting on every open for weeks, and the yard manager had taken to shoving the gate by hand. When we got there, the rollers had wallowed out from years of constant cycling and heavy vibration from the rail corridor. The rack and pinion were so far out of alignment the motor was tripping its overload every third cycle. We re-set the post footing, replaced the roller hardware, and re-aligned the rack. The gate has cycled clean ever since. That’s the kind of job that simply doesn’t show up in the purely residential suburbs around us, and it’s why a generalist handyman is the wrong call in Haltom City.
We Also Serve Cities Near Haltom City
If you’re just outside Haltom City in North Richland Hills, Hurst, Bedford, or Keller, we cover those areas regularly. For an overview of everything we do across the region, see Gate Parts & Welding in Haltom City page for the full picture, or call us and we’ll point you the right way.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haltom City
Gate posts in Haltom City lean most during spring and fall because those are the seasons when the Vertisol clay soil under Tarrant County moves through its fastest wet-dry transitions. Spring rains swell the clay and lift shallow footings. Fall heat shrinks the clay and lets posts settle unevenly. Over years, that cycle pushes posts out of plumb. The permanent fix is re-setting the post in a deeper footing, not just shimming the gate back square, because the soil will move again. Call (254) 330-8718 and we’ll assess the footing before recommending any repair.
Yes. We routinely repair heavy sliding gates at Haltom City’s auto yards and industrial lots while the business stays open. We can secure the gate in place, work around delivery windows, and complete roller replacements or rack realignment the same day. For emergency failures, we can leave the gate operable by hand at minimum so you aren’t forced to run a man at the entrance all night.
Ranch-style wrought iron gates around Haltom City are usually welded steel frames with pickets, so repairs call for stick welding or MIG welding on mild steel in place. The work includes cleaning the joint, cutting out rust-thinned sections, welding in new steel matched to the existing profile, and re-coating. It’s done on-site, not in a shop, which keeps the opening secured and the gate aligned to its current posts. Estimates are free at (254) 330-8718.
For a long driveway gate in Haltom City, a solar panel is typically mounted on a pole within 50 feet of the operator, with the panel facing south and angled for North Texas sun. Most installs run 20 to 50 feet of low-voltage wire from panel to battery. Beyond 50 feet, line voltage drop becomes a factor, but we can size the wire up or locate a secondary panel post closer to the gate. We install solar for LiftMaster and other operators on properties where running mains power to the gate isn’t practical.
Yes. We’re certified on LiftMaster, DoorKing, FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. On Haltom City’s industrial corridors we service commercial slide and swing operators from both LiftMaster and DoorKing regularly, including limit switch replacement, gear train repair, loop detector work, and full operator replacement when the unit is past service life. Call (254) 330-8718 with the model number and we’ll give you a straight answer on repair versus replace.
Call Ironworks Gate Co. for Haltom City Gate Parts & Welding
If your gate leans, drags, clanks, or won’t open at all, don’t wait for a small problem to become a failed post or a burned-out operator. Call (254) 330-8718 and you’ll get a live person, 24 hours a day, seven days a week. We’ll schedule a time that works for you, quote the work in writing before anything starts, and stand behind it with our 90-Day Done Right Promise. Senior and Veteran customers save 5%, and any repair over $250 currently carries $50 off. Done right, backed in writing, here in Haltom City.
Written by Victor Salinas, Owner at Ironworks Gate Co. For over 42 years, we’ve served homeowners and businesses across the Dallas-Fort Worth region, and we’ll be here when you call.