FAAC Gate Installation Nationwide

FAAC Gate Installation in Keller: What to Know First

FAAC gate installation in Keller is work we handle regularly, usually completing most residential jobs in a single visit once the gate and operator are on site. As an independent FAAC service provider, we install and service the full range of FAAC operators on driveway gates, pedestrian gates, and estate gates throughout Keller, with upfront pricing settled before any work begins. If you have a new FAAC operator sitting in the box or an existing one that has given up, call (254) 330-8718 and we will walk you through what to expect. This page is written for Keller homeowners who own or are considering FAAC equipment and want the installation done right the first time, backed in writing.

Call (254) 330-8718

How FAAC Products Fail - and How We Fix Them

FAAC builds solid operators, but every brand has its patterns. After years of working on FAAC equipment across Keller driveways, we know exactly where to look. The most common failures we see are rarely the motor itself. They are usually environmental, electrical, or installation-related, and knowing the difference saves you money.

• FAAC 400 Series (swing gates): capacitor failure after Texas heat cycles. The 400 series uses a start capacitor that sits inside the operator housing. In Keller summers, where the housing can reach 140 degrees on a west-facing gate, capacitors degrade faster than FAAC’s documentation suggests. The symptom is a gate that hums but will not move, or one that stalls midway. We replace the capacitor with a higher-temperature-rated component and verify the thermal cutoff switch at the same time. A handyman will often condemn the whole operator when the fix is a $40 part and twenty minutes of work.
• FAAC 750 and 844 series (slide gates): limit switch drift from Keller’s clay soil movement. Slide gates in Keller sit on concrete pads that shift slightly as the clay soil expands and contracts through wet and dry seasons. When the pad moves even a quarter inch, the magnetic limit switches on the 750 and 844 series lose their reference point, and the gate over-travels or stops short. We correct the limits, shim the track if needed, and check the gate’s weight distribution. This is a Keller-climate reality you will not find in the FAAC manual.
• FAAC E024U control board: fried relays from power surges when storms roll through. The E024U board is the brain on many FAAC slide operators, and it has no built-in surge protection. North Texas thunderstorms send spikes down the line that take out the relay that drives the motor. We see this after nearly every severe weather season. Our fix is a board replacement plus an inline surge protector on the operator’s supply line, which costs less than the board and prevents the same failure next spring.
• FAAC hydraulic operators (old 770 and 750 hydraulic units): leaking seals from infrequent use. Hydraulic FAAC units that sit for weeks without cycling develop flat spots and cracks in the piston seals. The gate moves sluggishly, then stops entirely and leaves a small oil stain on the concrete. We reseal or replace the piston and flush the system, then set the operator to cycle on a timer so the seals stay wet. If the unit is past its service life, we will tell you straight and quote a replacement rather than patch it.
• FAAC 391 and 594 series (pedestrian swing gates): hinge wear throwing off the torque sensor. These smaller operators are sensitive to mechanical drag. When Keller’s humidity corrodes the gate hinges or the post settles, the increased resistance triggers the torque sensor and the gate reverses mid-cycle. The operator is fine. The hinges are not. We replace the hardware, sometimes with a heavier gauge than what was originally hung, and recalibrate the force settings. This is the difference between replacing a $600 operator and fixing a $75 hinge.

Our FAAC Gate Installation Process

Every FAAC job follows the same path, whether it is a new installation or a replacement on an existing gate. Here is what happens from the first call to the final walkthrough.

1. 1
   The call. You call (254) 330-8718 and a live person answers, day or night. Tell us what the gate is doing and what it is not doing, and we will give you a straight idea of what we are likely dealing with before we ever roll a truck.
2. 2
   On-site diagnosis. We arrive when we say, in a marked truck, and assess the gate, the operator, the power supply, and the hinges or track. On a FAAC job, we test the operator with the gate disconnected so we know whether the problem is mechanical or electrical. Most diagnoses take less than an hour.
3. 3
   The written price. Before a single bolt is turned, you get a firm number for the full job. That number does not change unless we find something hidden that requires your approval first. No surprises on the bill, ever.
4. 4
   The work. We install or replace the operator, wire the control board, set the limits, calibrate the force and speed, and verify every safety feature. On swing gates, we check the hinges and post alignment. On slide gates, we check the track and wheels. We use OEM FAAC parts where it matters for warranty and reliability, and quality aftermarket parts where they perform identically for less money. We will tell you which is which and why.
5. 5
   Testing and cleanup. We cycle the gate at least a dozen times in both directions, test the obstruction sensors, and confirm the keypad, remotes, and any intercom or access control devices are working. Then we clean up the work area and walk you through everything before we leave.
6. 6
   The 90-Day Done Right Promise. Every FAAC installation is covered by our written guarantee. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions. That is the Keystone Standard on every job we do in Keller.

What FAAC Gate Installation Costs in Keller

FAAC gate installation in Keller runs on a fairly predictable range, and the best way to get an exact number is to call us. These are the figures we quote most often for residential work in this area.

The honest truth is that the quote depends on what is in your driveway. A 400 series on a light ornamental gate is a different job than an 844 on a 30-foot steel slide gate. We give free estimates, and the number we quote is the number you pay. Call (254) 330-8718 and we will come measure and price it in writing.

Why Keller Homeowners Call Ironworks Gate Co. for FAAC Work

We have been doing gate work since 1984, and we have been in Keller long enough to know which FAAC units are holding up on which streets and which ones were marginal from the day they were hung. Victor Salinas grew up in Keller and still lives a few miles from Bear Creek Park, and the company operates the way he was raised to work: show up when you say, do the job right, and stand behind it. We are trained and equipped on nine automation brands, so if your FAAC operator is not worth saving, we can quote you a direct comparison against LiftMaster, Mighty Mule, Ghost Controls, or DoorKing and give you an honest recommendation. The difference is that we are a gate company, not a general contractor that occasionally touches gates. That is all we do, and the 90-Day Done Right Promise applies to every FAAC installation, every time. We also keep a live person on the phone 24 hours a day, and our technicians are background-checked and uniformed. When your gate fails at 6 a.m. and you cannot get out of the driveway, someone here answers.

FAQs