Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Gate Access Control in Keller: What to Know First
DoorKing gate access control repair in Keller typically runs $180 to $420 for keypad, receiver, and circuit-board work, and most jobs are finished the same day we arrive. We’re an independent DoorKing service provider, which means we fix what’s in front of us without pushing a replacement unless the board is truly beyond saving. If your keypad is dead, your remote stopped opening the gate, or the phone-entry box has gone silent, call (254) 330-8718 and tell us what it is doing and what it is not doing – that is usually all we need to get started.
This page is for Keller homeowners who own a DoorKing gate operator, keypad, or telephone entry system and want a straight answer about what’s wrong and what it costs to make it right. Victor Salinas, our owner, grew up in Keller and still lives a few miles from Bear Creek Park. We’ve been working on DoorKing equipment in this town long enough to know which models hold up and which ones don’t.
How DoorKing Products Fail - and How We Fix Them
DoorKing makes solid equipment, but every brand has its habits. Here’s what we see most often on Keller driveways:
- Dead keypad on a 1812 or 1830 series. The keypad membrane cracks in North Texas sun, and humidity gets into the conductive traces underneath. The symptom is usually one row of buttons that quits first. DoorKing doesn’t sell the membrane separately as a replacement part, so we either replace the keypad assembly with OEM or, if the customer wants a lower bill, install a weatherized aftermarket keypad wired into the same terminals. Both work. One costs less.
- Remote receiver stops responding after a storm. DoorKing’s 1514 and MicroPLUS receivers are sensitive to power surges that ride in on the low-voltage wiring. A nearby lightning strike doesn’t have to hit the gate to fry the receiver input. When we open the box and find a scorched terminal block or a blown fuse, that’s the story. We install inline surge protection on every receiver we replace so the next storm doesn’t do the same thing.
- Phone entry system rings but won’t open the gate. On DoorKing 1803 and 1830 telephone entry systems, the relay that fires the gate operator wears out after years of use. The caller hears the phone ring, the resident presses 9, and nothing happens. It’s a $60 relay, not a new system. We’ve fixed dozens of these where another company quoted a full replacement.
- Card reader works intermittently in cold weather. We see this on older DoorKing 1504 and 1524 card readers. The solder joints on the board contract in the cold and open the circuit just enough to drop the read. It works again when the sun warms the box. The permanent fix is a board-level reflow or a replacement card reader head, depending on the age of the unit.
- Gate opens by itself at random hours. On DoorKing swing and slide gate operators with plug-in loop detectors, a failing loop detector relay can cause phantom activations. The operator thinks a car is on the loop when there isn’t one. We replace the loop detector with OEM or a compatible aftermarket part, then test the loop frequency to make sure the new part talks to the old loop wire correctly.
Our DoorKing Gate Access Control Process
Here’s how a DoorKing access control job goes when you call Ironworks Gate Co.:
- 1
You call, a person answers. No menu, no callback queue. We ask what the system is doing and not doing, and we schedule a time that works. We show up when we say we will.
- 2
We diagnose before we quote. Our tech opens the operator cabinet, checks voltage at the board, tests the keypad or receiver with a meter, and finds the actual fault. You get a written price before any work starts. You agree to it, and only then does work begin.
- 3
We make the parts call with you. For DoorKing-specific parts like control boards and RF receivers, we use OEM when the equipment is under warranty or when the customer wants factory original. For keypads, loop detectors, and relays, we offer a quality aftermarket option that typically costs 30 to 40 percent less and carries the same 90-Day Done Right Promise.
- 4
We fix it and test it. The repair goes in, and then we run the system through every function: keypad codes, remotes, phone entry if equipped, safety loops, and the gate’s full open-and-close cycle. We don’t leave until it works like it should.
- 5
We walk you through it. Before we leave, we show you what we changed, how to program the keypad, and what to watch for going forward. No jargon, no rushed explanation.
- 6
The 90-Day Done Right Promise applies. If anything is not right, we come back and make it right. That’s written, no paperwork, no arguing.
What DoorKing Gate Access Control Costs in Keller
Straight numbers, based on what we’ve billed on Keller jobs in the last few years:
- Keypad replacement (parts and labor): $180 to $340
- Remote receiver replacement: $220 to $380
- Phone entry system repair (relay or board): $200 to $420
- Card reader replacement: $250 to $450
- Full control board replacement on a swing or slide operator: $400 to $800
- Loop detector replacement: $150 to $280
The price moves based on which DoorKing model you have, whether we use OEM or aftermarket parts, and how long the diagnosis takes. Most access control repairs fall between $180 and $420. You’ll know the exact number before we turn a single screw. Call (254) 330-8718 for a free estimate on your specific system.
Why Keller Homeowners Call Ironworks Gate Co. for DoorKing Work
We’ve been serving the Keller area for over 42 years, and we’re not going anywhere. That matters when your gate is stuck open at 6 a.m. and you need a company that will still be around next year to honor the work. Every job we finish carries the 90-Day Done Right Promise: if it is not right, we come back and make it right. No paperwork, no arguing, no exceptions. Our techs are background-checked and uniformed, and they treat your driveway the way they would treat their own mother’s.
DoorKing is one of nine gate-automation brands we service, alongside LiftMaster, Mighty Mule, Ghost Controls, and others. That means when we show up to a DoorKing job and find that a previous contractor mixed brands or wired in something that doesn’t belong, we know how to sort it out. Most DoorKing access control repairs are finished in a single visit.
FAQs
No. We’re an independent DoorKing service provider, not an authorized dealer, but the Magnuson-Moss Warranty Act protects your right to have equipment serviced by a third party without voiding the warranty. We use OEM parts on warranty-covered equipment to keep everything compliant, and we document the work clearly. If your DoorKing unit is still under warranty and you want the manufacturer involved, we’ll tell you that honestly before we touch anything.
We keep the most common DoorKing parts on our trucks: keypads, remote receivers, loop detectors, relays, and fuses. For less common items like complete control boards or telephone entry modules, we source from our DFW suppliers, and most parts arrive the same or next business day. We’ll tell you the parts lead time before we quote the job, so there are no surprises.
If the operator itself is sound and the problem is in the keypad, receiver, or relay, repair almost always makes sense. Those are plug-and-play parts. If the system is over 15 years old and the control board has failed, you’re looking at $400 to $800 for a new board, and at that point we’ll talk with you honestly about whether the equipment around it is worth the investment. We don’t push replacements. We give you the numbers and let you decide.
For an access control failure where the gate won’t open or won’t respond, we typically get to customers in Keller the same day or the next morning. A live person answers our phone 24 hours a day, 7 days a week, so if your gate is stuck at night, you won’t get a voicemail. Call (254) 330-8718 and we’ll get you scheduled.
We handle the full gate system: the access control, the operator, the low-voltage wiring run, the safety loops, and the edges. A DoorKing access problem is sometimes not the keypad at all but a broken wire or a failing loop. We trace the whole system so we fix the actual cause, not just the symptom in front of us.
If your DoorKing gate access control is acting up in Keller, call (254) 330-8718. We’ll answer, we’ll listen, and we’ll give you a straight price before any work begins. Free estimates, no surprises on the bill, and the 90-Day Done Right Promise behind every job.
Written by Victor Salinas, Owner & Gate Repair Technician, Ironworks Gate Co. at Ironworks Gate Co., serving Keller and nearby areas.