Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Parts & Welding in Keller: What to Know First
Most Ghost Controls gate parts and welding repairs in Keller can be completed the same week, often in a single visit, and you’ll know the price before we turn a single bolt. We’re an independent Ghost Controls service provider - not a factory-authorized shop - which means we answer to you, not a warranty department, and we’ll tell you plainly when a job calls for OEM parts or when a quality aftermarket option does the same work for less. If your Ghost Controls opener is acting up or your gate is sagging, binding, or showing a broken weld, call (254) 330-8718 and tell us what it’s doing and what it’s not doing - that’s usually all we need to get started. This page is for Keller homeowners who own a Ghost Controls system and want to know what’s failing, what it costs, and who in town handles it correctly the first time.
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls builds a respectable residential opener, but after 42 years in Keller we’ve seen the same few failure points repeat themselves. Here’s what shows up at the curb:
- Slow arm movement on the AAB1 and AXDP series. Keller’s summer heat doesn’t kill Ghost Controls arms the way it kills cheaper brands, but dust and grass clippings work their way into the pivot joints and the arm slows down over a season or two. Owners often think the motor is dying. It isn’t. We disassemble, clean, lubricate, and re-time the arm - usually under $200, no new parts needed.
- Gate sag pinning the opener. This is the most common Ghost Controls failure in older Keller neighborhoods like Hidden Lakes and Marshall Creek, where gates were hung on light-duty hinges in the early 2000s. The Ghost Controls opener keeps trying to move a gate that’s now dragging on the ground, and the arm or the board eventually gives up. We replace the hinges, straighten or rebuild the posts, and re-hang the gate so the opener only does the work it was designed for. The gate closes like the day it was hung.
- Arm bracket welds cracking on the VPG and TDS2 series. Ghost Controls includes a bolt-on bracket, but when a wind gust catches a solid-iron gate - common in the open lots off Bear Creek Parkway - the bracket twists and the welds start to crack. We cut out the old bracket, weld a reinforced plate, and re-bolt everything so the arm isn’t fighting the gate.
- Clicking, but no movement. A Ghost Controls opener that clicks but won’t move usually has a dead capacitor on the control board or a slipped gear in the arm assembly. Ghost Controls doesn’t sell individual gears for most arm models - they expect a full arm replacement. We keep quality aftermarket gear sets and can rebuild the arm for roughly a third of the cost of a new one. Same movement, same warranty on the repair.
- Worn gate rollers on sliding Ghost Controls installations. The sliding gate kits Ghost Controls sells work well, but the rollers are a consumable. We replace them with sealed-bearing rollers and set the track so the gate rides square. Misadjusted rollers are why so many Ghost Controls sliding gates drift off-track within a year.
Our Ghost Controls Gate Parts & Welding Process
- 1
Call and describe the symptom. A live person answers at (254) 330-8718, 24 hours a day. Tell us what the gate is doing and what it isn’t doing. Victor Salinas grew up in Keller and still lives near Bear Creek Park, and he can usually narrow this down from your description before we even schedule the visit.
- 2
On-site diagnostic. We inspect the gate from post to post - hinges, welds, rollers, opener arm, board, and power supply - and we quote the repair before any work begins. No surprises on the bill, ever.
- 3
Parts decision. We tell you when a Ghost Controls OEM part is the right call (usually on the board or transformer) and when a quality aftermarket gear set or roller upgrade will outlast the factory part. The quote covers either path, and you approve it first.
- 4
The repair. Welding, hinge replacement, arm rebuilds, post re-setting - whatever the job needs. Our techs are uniformed, background-checked, and trained on Ghost Controls residential openers, with the same care on the 400th job as the first.
- 5
Full cycle test. We run the gate twenty or thirty times, confirm the limits and force settings, and listen for anything that sounds off.
- 6
Cleanup and the 90-Day Done Right Promise. We leave the driveway the way we found it, and every Ghost Controls job is backed by our written 90-Day Done Right Promise - if it isn’t right, we come back and make it right, no arguing, no paperwork.
What Ghost Controls Gate Parts & Welding Costs in Keller
Here’s what these jobs typically run in the Keller market. Every job is quoted and agreed before work starts:
- Hinge replacement: $180-$400 per hinge, depending on gate size and post condition. Most residential gates need 2-3 hinges.
- Ghost Controls arm rebuild (gears/capacitor): $225-$350, versus $500-$700 for a full arm replacement.
- Custom bracket welding: $120-$250, including materials and cleanup.
- Post replacement and re-hang: $600-$1,400, depending on concrete and fence tie-ins.
- Gate roller replacement (sliding gates): $150-$300 for a full roller set with track adjustment.
What moves the price? Gate weight and steel condition, whether the post is set in concrete that needs breaking out, and whether the opener is still salvageable. Estimates are free - call (254) 330-8718 and we’ll give you an honest number before you commit to anything.
Why Keller Homeowners Call Ironworks Gate Co. for Ghost Controls Work
We’ve been serving Keller and the surrounding North Texas communities since 1984, and we intend to be here another 40 years. That matters because a gate company that plans to stay in town doesn’t sell a cheap fix and disappear. Every Ghost Controls repair we complete is backed by our written 90-Day Done Right Promise - no hassle, no exceptions. We also service seven other major brands, including LiftMaster, Mighty Mule, and DoorKing, so if you ever replace your Ghost Controls opener, we’re not going to tell you to find another company. A live person answers our phone every hour of every day, not a machine. A square deal: upfront price, no surprises on the bill.
FAQs
Most Ghost Controls parts are still available, including arms, boards, remotes, and keypads. Where OEM parts have been discontinued or are priced unreasonably - like arm gear sets - we carry quality aftermarket equivalents and stand behind them with the same 90-Day Done Right Promise. Call (254) 330-8718 and we’ll check availability before your visit.
If your Ghost Controls system is still under the manufacturer’s warranty, the safest path is OEM parts for any in-warranty component. If the warranty has already expired - which is true for most Ghost Controls systems in Keller that are five or more years old - aftermarket gears and rollers are often the better value and sometimes outlast the factory parts. As an independent Ghost Controls service provider, we’ll always tell you which route makes the most sense for your gate.
In most cases, we can replace just the hinge and save the gate. Keller’s blackland clay shifts with the seasons, which moves posts and stresses hinges over time, but unless the gate frame itself is rotted or the welds are failing throughout, a hinge replacement and post reset gets another decade out of it. We’ll tell you honestly if the gate has reached the end of its useful life.
We can often be on-site the same day or the next morning for gate emergencies in Keller. A gate stuck open is a security problem, and a gate stuck closed is a life inconvenience - we treat both as urgent. Call (254) 330-8718 any time, day or night, and a live person will answer.
Yes. The parts and welding work is half the job; the other half is low-voltage electrical - the transformer, board, and sensor wiring. Our techs are trained in low-voltage systems, which means we can diagnose and complete the entire repair in one visit instead of telling you to call an electrician. That’s the difference between a gate that works and a gate you don’t think about for another ten years.
If your Ghost Controls gate is giving you trouble in Keller, call Ironworks Gate Co. at (254) 330-8718 for a free estimate. A live person will answer, and we’ll be there when we say.
Written by Victor Salinas, Owner & Gate Repair Technician, Ironworks Gate Co. at Ironworks Gate Co., serving Keller and nearby areas.