Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Keller: What to Know First
Ghost Controls gate repair in Keller runs $140 to $390 for most jobs, and we complete the large majority in a single visit. That’s the honest range: a house-call diagnosis, the parts, and the labor to get your gate closing right again. If you’ve got a Ghost Controls opener that’s humming but not moving, or a gate that won’t budge at all, call (254) 330-8718 and we’ll get a technician out to look at it.
This page is written for Keller homeowners who bought or inherited a Ghost Controls automatic gate opener and now need someone who actually knows the product. Not a handyman who’ll poke at it for an hour and guess. Victor Salinas, our owner, grew up here in Keller and has worked on Ghost Controls gear long enough to recognize the failure before he opens the panel. We’re an independent Ghost Controls service provider, which means we tell you the truth about the equipment without a manufacturer’s script. We fix it right, we charge what we quoted, and we stand behind the work in writing.
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls builds a solid product for the price, but like every opener brand, they have failure patterns we see repeatedly throughout Keller. Here’s what actually goes wrong and what we do about it:
- AXDP and AXD Dual Swing Series: limit switch drift. These are the workhorses on Keller driveways, and after a few years of Texas heat and wind, the internal limit switches drift out of calibration. The gate starts stopping six inches short of closed, or it reverses for no reason. The homeowner thinks the board is fried. It almost never is. We recalibrate the limits, verify the auto-close timer, and the gate behaves again. That’s a $90 fix, not a $400 board replacement.
- Gate arm(s) binding at the hinge from Keller’s clay soil shift. Northeast Tarrant County sits on expansive clay that swells and contracts with every dry summer and wet spring. Gate posts move. When a post leans even a quarter inch, the Ghost Controls arm starts fighting the hinge instead of swinging freely. The opener pushes harder, draws more current, and eventually trips or burns the motor. We reset the post, weld a support if the base is compromised, and realign the arm so the opener isn’t working against the geometry. This is one we see constantly in older Keller neighborhoods like Hidden Lakes and Marshall Ridge.
- Battery backup failure in the R Series with no warning light. Ghost Controls battery backup systems, especially the ones installed four or five years ago, fail silently. The control board shows full AC power, everything looks fine, and then the next power blip leaves the gate dead. Worse, a failing battery can drag voltage down and make the opener behave erratically even while plugged in. We test the battery under load during every Ghost Controls visit, not just with a multimeter at rest. A weak battery reads fine at idle and collapses under draw. That’s how you catch it before it strands you.
- Water intrusion at the control board on the side-mount configuration. Ghost Controls boards sit low in the housing, and on side-mount installs where the panel faces the weather, a driving Keller storm can push water past the gasket. The board corrodes at the connector pins and the gate starts doing things on its own, opening at 3 a.m., ignoring the remote, running half cycle. Sometimes we can clean and reseal the board. When we can’t, we replace it with an OEM board and re-grease the gasket channels so the next storm doesn’t repeat the job.
- Remote range dropping to ten feet or less. Ghost Controls remotes run on standard frequencies, and the receiver antenna on several models is just a short pigtail wire. In Keller, with our tree cover and the metal mesh in some stucco homes, that wire gets pinched or tucked behind a steel post. The fix is repositioning the antenna or adding a short extension, thirty minutes of work, and the homeowner gets their range back from the driver’s seat at the street. We check this on every Ghost Controls diagnostic because it’s the second most common complaint, right behind limit drift.
Our Ghost Controls Gate Repair Process
When you call (254) 330-8718 with a Ghost Controls problem, here’s what happens, step by step. No mystery, no waiting around, no surprise bill at the end.
- 1
You call, a live person answers. Day or night, weekend or holiday. That’s our policy and it has been for 42 years of operation. You describe what the gate is doing. Victor often says it plainly: “Tell me what it is doing and what it is not doing – that is usually all I need to get started.”
- 2
We schedule a specific arrival window and show up in it. Our technician arrives in a company vehicle, in uniform, background-checked. He’ll ask to see the gate’s recent behavior before he touches anything.
- 3
Diagnosis on site, quoted before work. We find the failure, show you what’s wrong in plain English, and give you a fixed price for the repair. That price is agreed before a single bolt is turned. If you decide not to proceed, you pay the diagnostic fee and that’s the end of it.
- 4
Parts decision: OEM when it matters, quality aftermarket when it saves you money. For control boards and motor assemblies, we use Ghost Controls OEM parts because they’re warrantied and they fit exactly. For things like receiver modules or remotes, we’ll offer an aftermarket option if it’s genuinely equal and less expensive. You decide with the facts in front of you.
- 5
The repair, done completely in one visit when parts are on the truck. Our Ghost Controls service van carries the common failure parts: limit switches, batteries, boards for the AXDP and R series, remotes, receiver modules, and bearings. Most jobs finish same visit.
- 6
Full test cycle and the 90-Day Done Right Promise. We run the gate through open, close, auto-close, obstruction reverse, and remote range before we leave. Then we hand you the written 90-Day guarantee. If anything about that repair isn’t right within 90 days, we come back and make it right. No forms, no arguments.
What Ghost Controls Gate Repair Costs in Keller
Here’s the real pricing picture for Ghost Controls work in Keller, not the “call for quote” runaround:
- Diagnostic visit (applied to repair): $75-$95. If you approve the repair, that amount comes off the job total.
- Limit switch adjustment or recalibration: $90-$140. About an hour, no parts usually needed.
- Remote or receiver issue: $95-$180 depending on whether we’re reprogramming an existing remote, adding a new one, or replacing the receiver module.
- Battery backup replacement (R Series and similar): $160-$240, includes the battery and load testing the charging circuit.
- Control board replacement: $280-$420, OEM Ghost Controls board with the warranty intact. This is the big one and we never quote it without showing you the failed board first.
- Gate realignment with post reset and hinge repair: $250-$500 depending on post condition, weld requirements, and gate weight. Common on older Keller properties where the clay has worked on the posts for decades.
What moves the price: whether the gate is single or dual swing, how accessible the opener is, whether a part is in the truck or has to be ordered (rare, but it happens on older discontinued series), and whether we’re fixing the opener or also correcting a mechanical problem the opener has been fighting. You’ll know the number before we start. Call (254) 330-8718 and we’ll give you a free estimate over the phone for most common Ghost Controls issues, or schedule the diagnostic and lock in the repair price on site.
Why Keller Homeowners Call Ironworks Gate Co. for Ghost Controls Work
We’ve been in business since 1984, and we’ve spent that time doing one thing: gates. Not gates and fencing and landscaping and whatever else comes up. Gates. That focus means our technicians have seen more Ghost Controls failures than most companies will see in their entire history. When we show up at a Keller home, we’re not learning the product on your dime.
We also service the other brands sitting on your neighbor’s driveway: LiftMaster, Mighty Mule, and DoorKing, along with five more. That cross-brand experience matters because when a Ghost Controls unit fails, we know whether the problem is brand-specific or a generic gate issue. The diagnosis is faster and the fix is more likely to be right the first time. Every job carries the 90-Day Done Right Promise in writing. Every technician is background-checked and uniformed. And every call is answered by a person, 24 hours a day. We’ll be there when we say, the price you approved is the price you’ll pay, and the gate will work like it should. That’s the whole deal.
FAQs
No. We use Ghost Controls OEM parts for board and motor replacements, which keeps the manufacturer’s warranty intact on those components. We’re an independent Ghost Controls service provider, not an authorized dealer, which means we choose parts based on what’s best for your gate, not on a dealership agreement. If your gate is still under Ghost Controls’ warranty period, we’ll tell you at the diagnostic whether the failure should be handled as a warranty claim through Ghost Controls directly. We’ll even help you file that claim when it applies. If it’s outside warranty, we fix it with OEM parts and back the repair with our own 90-Day written guarantee. Call (254) 330-8718 if you want us to check what’s covered before you spend a dollar.
We keep the common Ghost Controls failure parts on the truck: limit switches, control boards for the AXDP and R series, batteries, remotes, receiver modules, and bearings. If your repair needs one of those, it’s done same day. Parts for discontinued or older series sometimes need to be ordered, and in those cases we’ll tell you the honest lead time and the exact price before you commit. We never start a job with a mystery part on order and a gate left inoperable without your approval. Call (254) 330-8718 and tell us what series you have. We’ll tell you over the phone whether the part is likely in the truck.
Repair makes sense when the opener is under about 8 years old and the failure is a single component like a board, limit switch, or battery. The repair cost runs $140 to $420, which beats the $800 to $1,600 of a new opener installation. Replacement starts making sense when the opener is over a decade old, when the motor itself is failing, or when the gate geometry has changed enough that the opener is undersized for the job. Victor will show you the condition of your unit, give you both numbers, and let you decide. We don’t push replacement when repair will give you another five good years. For an honest assessment, call (254) 330-8718 and ask for a Ghost Controls evaluation.
For a gate that’s stuck closed and trapping a vehicle, we treat it as a priority call and typically arrive same day or next morning. For a gate that opens manually but the opener has failed, we schedule within one to three days depending on our board. If it’s an emergency and your Ghost Controls battery backup has also failed, call (254) 330-8718 any hour. A live person answers and we’ll get you on the schedule with a real arrival window, not a four-hour “sometime” range.
Most Ghost Controls repairs in Keller fall between $140 and $390. Simple limit switch recalibration runs about $90 to $140. Battery backup replacement runs $160 to $240. A control board replacement runs $280 to $420. These are fixed prices quoted before work begins, not estimates that drift upward. The exact number depends on your opener series and what the diagnostic shows. Call (254) 330-8718 and describe the symptoms. We’ll give you a realistic price range over the phone before we ever set foot on your property.
Contact Ironworks Gate Co. for Ghost Controls Repair in Keller
If your Ghost Controls gate is acting up, call (254) 330-8718. You’ll get a live person, a straight answer, and a free estimate. We’ll diagnose it right, quote it honestly, and fix it with parts built for the job. The guarantee is in writing and it’s good for 90 days. No forms, no arguments, no chasing us down. That’s how we’ve done it in Keller since 1984, and that’s how we’ll do it for your gate.
Written by Victor Salinas, Owner & Gate Repair Technician, Ironworks Gate Co. at Ironworks Gate Co., serving Keller and nearby areas.