Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Hurst
Gate access control in Hurst means more than wiring a keypad. It means working with gates that were hung in the 1960s and 1970s, on posts set into North Texas clay that never stops moving. We’ve spent over four decades sorting out exactly these problems. When a Hurst homeowner calls us about a keypad that worked in April and quit in August, or a legacy opener that predates modern safety rules, we know what we’re walking into before the truck pulls up. Call (254) 330-8718 and a live person answers, any hour, any day.
Why Ironworks Gate Co. Is Hurst’s Preferred Gate Access Control Company
We have been doing gate work since 1984, and a good share of our access control calls in Hurst come from ranch homes in the 76053 and 76054 zips. These are houses built when a gate was a cedar panel on pipe posts, with a padlock if you were security-minded. Today’s homeowner wants a keypad, a remote, maybe a phone app, and a gate that closes itself without crushing the grandkids’ bikes. We retrofit the old and install the new, and we do it with a written 90-Day Done Right Promise on every job. No paperwork to file, no arguing. If it is not right, we come back and make it right.
Our technicians are background-checked and uniformed. They treat your driveway the way they would treat their own mother’s. The company is led by Victor Salinas, and the standard he set for the first job still applies to the 400th: krafted right, every time, your home first, standing behind it. Hurst homeowners between 55 and 75 have seen enough contractors come and go. We plan to be here another forty years.
Our Gate Access Control Services in Hurst
Keypad Entry
Hurst gate keypads fail in ways that keypads in other cities don’t. The post they are mounted to heaves with the clay, and a tilt of just a few degrees is enough to misalign the internal switches or trap moisture behind the faceplate. We install keypads on reinforced mounting plates, and when the post itself has moved, we address that first. A typical keypad installation or replacement in Hurst runs $250 to $550, including the new unit and the wiring check.
Remote Control
Most Hurst driveways have at least two remotes floating around, and one of them always quits at the worst time. We program and replace remotes for every major opener brand, including FAAC and Linear, and we match the frequency to your existing receiver rather than selling you a universal that half-works. For older systems, we can add a modern receiver that accepts rolling-code remotes, which stops the signal-capture trick that older fixed-code gates are vulnerable to.
Phone Entry
Phone entry systems let you buzz a visitor in from your cell, and they are growing in Hurst because so many homes here have long driveways and gates set back from the street. We install cellular-based systems that don’t depend on your home Wi-Fi, and we tie them into existing operators from BFT, Viking, and others. A complete phone entry retrofit on a single gate in Hurst typically runs $800 to $1,500, depending on whether we need to add a receiver or upgrade the control board.
Card Reader
Card readers make sense for Hurst homeowners who want to hand access to a caregiver, a pool service, or a lawn crew without giving out a code that gets shared. We install proximity readers that work with fobs or cards, wired into the same control board that runs the gate. If your existing board is from the 1990s and has no reader input, we will tell you honestly whether a new board is the smarter spend than wiring around the old one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Video Intercom and Smart Access
Smart access is the fastest-growing request we get in Hurst, especially from homeowners who split time between here and a lake house or who have adult children managing the property. A video intercom lets you see who is at the gate and open it from a phone app, with a log of every entry. These systems require a stable power source and a gate that is square and balanced. On a Hurst gate with heaving posts, we fix the geometry before we mount the camera, because a smart system on a sagging gate is a smart system that sends false alerts and eats batteries.
Trusted Brands We Service in Hurst
We are trained and equipped on nine gate automation brands, and in Hurst we see a lot of FAAC, BFT, and Linear operators on driveways that were automated in the 1990s and early 2000s. We stock common parts for these brands so a board swap or limit switch replacement doesn’t mean waiting a week for a shipment. When a legacy operator is no longer supported, we recommend a retrofit path that keeps your existing gate and replaces the automation, rather than selling you a whole new gate when you don’t need one.
Common Gate Access Control Problems We See in Hurst Homes
- Keypad codes fail in late summer. The clay under the gate post shrinks during the dry months, the post tilts, and the keypad’s internal contacts lose alignment. It is not the keypad’s fault. We fix the post and the keypad together.
- Ice storms knock access hardware out of line. Freezing rain adds real weight to a wooden gate panel, bending frames and stripping hinge screws. Keypads and card readers mounted to the panel end up dangling or shorting. We see this every January in Hurst.
- Legacy openers without safety sensors. Gates installed before UL 325 standards became mandatory often lack photocells or loop detectors. A reversing gate without entrapment protection is a serious hazard. We retrofit these gates with current safety devices.
- Post heave toward the drainage swale. In Hurst’s older neighborhoods, the downhill post stays wetter longer, swells more, and lifts the gate out of square. A gate that was hung perfectly in spring can bind by August. This is the single most common root cause behind access control failures we see in Hurst.
Pricing for Gate Access Control in Hurst, TX
Here are honest numbers for the Hurst market. A keypad replacement runs $250 to $550. Adding a new receiver and reprogramming remotes runs $150 to $350. A phone entry system with cellular connectivity runs $800 to $1,500. A full smart access retrofit with video intercom runs $900 to $2,200, depending on gate condition and existing wiring. Card reader installations run $400 to $900 per reader. A new control board for a legacy opener runs $350 to $800. We quote every price before a single bolt is turned, and the number we quote is the number on the invoice. Standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans save 5%, always.
We Also Serve Cities Near Hurst
Our Gate Access Control team works across the Mid-Cities. If you are in Bedford, North Richland Hills, Colleyville, or Haltom City, we handle the same clay-soil gate problems there, with the same 90-Day Done Right Promise. Many of our Hurst customers recommend us to family in those neighboring cities. Learn more about our work in Hurst or call (254) 330-8718 from anywhere in the area.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Hurst
The soil under your gate post is the culprit. Hurst sits on Vertisol clay that swells with spring rain and shrinks hard during the summer, moving the post enough to misalign keypad contacts or pinch the wiring. We fix it by stabilizing the post and remounting the keypad on a reinforced plate, which usually runs $250 to $450. Call (254) 330-8718 for a free estimate.
Yes, in most cases. The gate itself needs to be square, the hinge posts solid, and the panel structurally sound. Once we confirm that, we add a current control board, safety photocells, and the smart interface. On 1970s gates in Hurst, the usual job runs $1,200 to $2,500 including entrapment protection. Call us and we will look at the gate before quoting.
A gate installed before UL 325 standards took effect is grandfathered, but that doesn’t make it safe. An opener without photocells or a reversing mechanism can trap a child or a pet. We retrofit legacy systems with current entrapment protection without replacing the whole gate. A safety retrofit in Hurst typically runs $300 to $700 per gate.
That is the classic Hurst clay-heave pattern. The downhill post sits in soil that stays wet longer after rain, so it swells more and pushes the post toward the drainage swale. During the summer the clay shrinks and the post settles at a tilt. We reset the post into deeper concrete with proper drainage, which runs $400 to $800 depending on gate size. This is the fix that makes the access control work reliably afterward.
Yes, and it is a common request for backyard gates where trenching a line would mean cutting through a patio or mature landscaping. Solar works best for single swing gates with moderate daily cycles. A solar conversion with a battery-backed operator in Hurst runs $900 to $1,800 installed. We size the panel for winter sun angles, which matters more than people think. Call (254) 330-8718 for an exact quote.
Contact Ironworks Gate Co. in Hurst
If your gate keypad is acting up, your remote quit, or you want to bring a 1960s gate into this century without replacing the whole thing, call us. We answer the phone 24 hours a day, seven days a week, with a live person, not a voicemail tree. We serve Hurst from our Dallas-Fort Worth office, with crews local to the Mid-Cities. You will get an honest look at the gate, a written price before anything is touched, and the 90-Day Done Right Promise behind the work. Call (254) 330-8718 for a free estimate today.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst since 1984.