Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Rhome
Gate access control in Rhome, TX means keeping your keypad, remote, phone entry, or card reader working on a gate that sits in Wise County’s shifting black clay. We get calls from homeowners across Rhome whose gate opener still has power but the keypad has drifted out of alignment, or whose solar battery died in late August and now the phone entry rings to nothing. Our team knows the specific failure patterns on these rural acreage lots, and we answer the phone 24 hours a day at (254) 330-8718, seven days a week, with a live person, not a voicemail tree.
If you need a repair, a new keypad, phone entry added to a shared driveway gate, or a card reader that will actually survive the soil movement out here, we will give you an upfront price before any work starts. That price gets agreed to in writing before a single bolt is turned. Done right, and backed in writing.
Why Ironworks Gate Co. Is Rhome’s Preferred Gate Access Control Company
Ironworks Gate Co. has built our reputation serving rural and exurban properties across Wise County, including Rhome. We have been at this since 1984, over 42 years, and we plan to be answering the phone for Rhome homeowners for another forty. Our Gate Access Control team handles keypads, remotes, phone entry, card readers, video intercoms, and smart access systems on gates of every size, from 2-acre hobby ranches to 10-acre estates off County Road 4840 and surrounding roads.
What sets us apart in Rhome specifically is that we understand how the local soil, heat, and storm patterns interact with gate electronics. A technician who only works ornamental subdivision gates in Fort Worth will misdiagnose a keypad that works fine in April but fails in September. Our technicians are background-checked, uniformed, and trained on nine gate automation brands, including FAAC, BFT, and Viking, so the right fix lands on the first visit.
We also stand behind every job with the 90-Day Done Right Promise. That is a written guarantee, no paperwork, no arguing. If it is not right, we come back and make it right, every time, on every job. Rhome homeowners tell us they remember the last contractor who let them down, and they are done gambling. That is exactly the customer we built this company for.
Our Gate Access Control Services in Rhome
Keypad Entry
A keypad mounted on a swinging gate in Rhome fights a unique opponent: the post it is bolted to. Wise County’s expansive black clay swells after spring rains and shrinks hard in summer drought, so a gate post can migrate by over an inch seasonally. That is enough to throw off the keypad’s angle and cause intermittent read failures. We remount keypads on steel bollards set back 18 inches from the gate travel path, out of the swing arc, so your code keeps working even as the gate post moves. A typical keypad replacement or remount in Rhome runs $180 to $420, depending on whether we are re-setting the post footing or just re-aiming the reader.
Remote Control
Most Rhome driveways are long, gravel, and rural. That means remote range matters more here than anywhere in the metro. If your remote only works when you are 15 feet from the gate, you likely have a receiver antenna issue, a failing battery in a solar-powered operator, or interference from a nearby transformer. We diagnose the actual cause and fix it, not just hand you a new remote and hope. Remote programming and receiver repair in Rhome typically runs $120 to $250.
Phone Entry
Phone entry systems are especially useful on shared driveway gates in Rhome, where two or more households use the same entrance and nobody wants to hand out a dozen remotes. The most common failure we see is solar-powered phone entry going dead in late August, when the heat has cooked the sealed lead-acid battery to the point where the controller has no power to trigger the loop detector. Calls ring, but nobody answers, and the gate will not open. We can convert that system to a hardwired power run or upgrade the battery bank and solar panel so it survives Rhome summers. Phone entry installation or repair on a Rhome property typically starts at $350 and runs up to $900 for a full solar-to-wired conversion.
Card Reader
Card readers on Rhome gates face the same soil movement problem as keypads, but they are often mounted lower on the gate post, closer to the heat-reflecting gravel and the moving ground. We mount card readers on fixed bollards or re-set the post footing and re-aim the reader every few years as part of routine maintenance. A card reader installation in Rhome, including wiring and programming, generally runs $400 to $800. If you need the reader integrated with an existing FAAC, BFT, or Viking operator, we can do that in a single visit in most cases.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rhome
We are factory-trained and equipped to service nine major gate automation brands, so whatever is on your driveway, we can fix it. Around Rhome, we see a lot of Viking slide gate operators, FAAC swing arms, and BFT systems on the newer acreage builds from the 2010s and 2020s. Run into a Linear or LiftMaster setup on an older farm gate? We handle those too, and we stock common parts for these brands locally so your repair does not stall waiting on a shipment. If we do need a part that is not on the truck, we tell you honestly and give you a real timeline, not an open-ended “we will call you.”
Common Gate Access Control Problems We See in Rhome Homes
- Keypad works after rain, fails in late summer. The post footing shifts during the wet spring, then the dry heat hardens the clay and locks the post in its new, slightly rotated position. The keypad is now aimed just off enough to miss reads. We re-set the footing and re-aim the reader.
- Phone entry rings but the gate will not open. On solar-powered systems, the late-August heat has killed the battery bank. The controller still has enough juice to ring the phone line but not enough to fire the gate motor. We replace the battery bank, upgrade the panel if needed, and test the whole loop under load.
- Slide gate stops halfway during midday heat. This is often not a remote problem. The gate frame has expanded in the heat and the rack and pinion is binding against the post footing, or the track has shifted on the driveway edge. We align the rack, free the gate, and verify the operator is not over-amping.
- Card reader reads inconsistently on a swinging gate. Same root cause as the keypad: the post the reader is mounted on is moving. We remount on a fixed bollard set back from the travel path so the reader stays put while the gate swings true.
Pricing for Gate Access Control in Rhome, TX
Here are real numbers for the Rhome market, based on the work we do out here every week. A keypad replacement runs $180 to $420. Remote programming and receiver repair runs $120 to $250. Phone entry installation or repair starts at $350 and goes up to $900 for a full conversion from solar to hardwired. A card reader install runs $400 to $800. Video intercom systems start at $900 and up, depending on whether you want a single monitor or multiple stations. Smart access retrofits with app control generally start around $500.
What changes the price in Rhome specifically is the condition of the post footing and the power situation. If the post has heaved and needs re-setting, that is extra labor and concrete. If the gate is solar-powered and the batteries are dead, that is a parts cost plus labor. We quote the full price before we start, and that is the price you pay. We also offer a free second opinion on any written estimate and $50 off any repair over $250. Senior and veteran discount is always 5% off.
We Also Serve Cities Near Rhome
Our Rhome customers are not the only ones dealing with Wise County black clay and hail-bent gate frames. We run the same crews to Newark, Haslet, Keller, and North Richland Hills, where the driveway gates range from rural ranch pipe to subdivision ornamental iron. The soil and the heat do the same work everywhere out here, and we know how to handle it.
Serving Rhome, TX - Our Local Coverage Area
We’re based in the Rhome area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Rhome
Your keypad is drifting out of alignment because the post it is mounted on is moving. Wise County’s black clay swells when it is wet and shrinks hard when it dries, which rotates the post slightly and changes the angle of the reader. After spring rain, the post is still roughly where it was. By late summer, the clay has dried and locked the post into its shifted position. The fix is to re-set the post footing or remount the keypad on a steel bollard set back from the gate travel path. Call (254) 330-8718 and we will come out and tell you which one your gate needs. Estimates are free.
Yes, in most cases. If the gate already has a solar operator, we can integrate a phone entry controller that runs off the same battery bank, though we may recommend upgrading the panel and batteries so the system holds up through the August heat. If the gate has no power at all, we can install a solar-powered phone entry kit sized for the gate’s duty cycle. We will quote the full price before any work starts. Call (254) 330-8718 for a free estimate on your specific shared driveway.
Almost certainly not. Midday heat expands the metal frame of the gate, and if the track has shifted toward the driveway edge or the rack and pinion is slightly misaligned, the gate binds and the operator’s obstruction sensor stops it mid-travel. Your remote is probably fine. The fix is to realign the rack, free the track, and verify the operator is drawing normal amperage. We can do that in a single visit. Call (254) 330-8718 and describe what you are seeing; we will tell you straight what it will take.
We stop mounting card readers on the moving gate post. The reader goes on a fixed steel bollard, set back 18 inches from the gate travel path, with its own concrete footing deep enough to resist the soil movement. The gate post can heave and shift all it wants, but the reader stays put and reads the card every time. On Rhome properties where we have done this, repeat card reader failures drop to near zero. Call (254) 330-8718 if you are tired of re-aiming yours every summer.
Automatic gates in Texas must comply with UL 325 safety standards, which require entrapment protection such as photoelectric sensors or contact edges that reverse the gate when someone or something is in the path. On a long rural driveway off a Wise County road, the gate often has more room to swing or slide, but the same rules apply. We install and verify the required safety edges and photo eyes on every gate we touch, and we test them before we leave. If your gate is missing entrapment protection, we will tell you, quote the fix, and get it done. Call (254) 330-8718 for a free assessment.
Call Ironworks Gate Co. for Gate Access Control in Rhome
If your keypad is drifting, your phone entry is dead, or your card reader will not read, we can fix it. We serve Rhome with a live person on the phone 24 hours a day, seven days a week, and we quote every job before we start. No surprises on the bill, and the whole job is backed by the 90-Day Done Right Promise in writing. Call (254) 330-8718 today for a free estimate. Victor Salinas and the Ironworks Gate Co. team will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rhome and the surrounding Wise County communities.