Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Southlake
When a heavy custom gate starts dragging on the driveway or a welded seam cracks at the hinge, Southlake homeowners need a shop that understands exactly what they’re looking at. Most houses here carry gates that weigh hundreds of pounds, hang on ornamental iron, and run on automation that has been in service for fifteen or twenty years. Our Gate Parts & Welding team works across Southlake daily, from replacements on sagging hinge posts to full custom rewelds on cracked ironwork. If your gate is misbehaving, call (254) 330-8718 and a live person will answer, any hour.
Why Ironworks Gate Co. Is Southlake’s Preferred Gate Parts & Welding Company
Southlake is not a place where a one-truck handyman with a flux-core welder and a guess gets called back twice. The gates here are too heavy, too expensive, and too integrated with automation and access control for guesswork. Led by Victor Salinas, our crews have spent over 42 years fixing the specific ways these systems fail. We work on gates anchored in stone pillars, running LiftMaster, Elite, and FAAC operators, and wired into keypad and intercom systems. We show up in uniform, background-checked, and we quote the job before we turn the first bolt.
Reviews from Southlake customers keep pointing to the same two things: the gate got fixed the same visit, and the invoice matched the quote. That is the standard. Scheduling for Southlake is coordinated from our Dallas-Fort Worth office, which puts a technician at your driveway fast when a gate will not open or a hinge weld has let go. Every job we complete is backed by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No arguing, no paperwork.
Our Gate Parts & Welding Services in Southlake
Hinge Replacement
A sagging gate leaf in Southlake usually traces back to a hinge that has worn or a post that has shifted. On heavy ornamental iron, a tired hinge barrel lets the leaf drop just enough to drag on the apron and strain the operator. We replace weld-on and bolt-on hinges with material matched to the gate, then re-align the operator travel so the system is not fighting itself. In neighborhoods like Carillon and Clariden Ranch, we routinely see original builder-grade hinges that have simply reached the end of their service life on 20-year-old gates.
Post Replacement
This is the job that separates gate specialists from generalists. Southlake sits on expansive black clay that shrinks in the summer drought and swells in the spring rain. Gate posts set in that soil, especially posts carrying hundreds of pounds of ornamental iron, heave and settle with the seasons. We dig out the old footing, pour a new concrete collar set below the shrink-swell zone, and reset the post to laser-verified plumb. Then we re-hang the leaf and dial in the operator. Off White Chapel Boulevard and through the estates near Southlake Town Square, this is one of the most common repairs we perform after September.
Rail Repair
Slide gates on Southlake estates ride on a rail that must stay perfectly true. When a section of rail gets knocked, rusts, or starts to wave, the gate jerks and eats rollers. We straighten or replace rail sections, align the pickup points, and check the end stops so the gate does not slam. Homes along Shady Oaks Drive and the larger lots near Lonesome Dove Road tend to run longer, heavier slide gates, which means rail repair there often involves re-bedding the track at the same time.
Custom Welding
Ornamental iron fails most often at the welds, and rarely without a reason. A cracked picket, a split seam at the hinge plate, a broken scroll, these are usually symptoms of a leaf that has been misaligned for a while, forcing the metal to flex with every cycle. We grind back to clean steel, weld with rod and heat settings matched to the original metal, and dress the repair so it does not jump out at you. Then we fix what caused the crack in the first place. On a custom dual-leaf gate off Continental Boulevard, that meant new hinge posts and a corrected operator limit in addition to the rebuild.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
Our technicians are factory-trained on the automation brands most common on Southlake driveways: LiftMaster, Elite, FAAC, Mighty Mule, and more. When we roll up to a home in 76092, we are not learning the system from the manual on the tailgate. That matters when you are dealing with a 15-year-old LiftMaster operator mounted in a stone column that has been cooking in the Texas sun since 2009. We keep common Southlake repair parts stocked on our trucks, which is why most parts and welding jobs are completed in one visit, not three.
Common Gate Parts & Welding Problems We See in Southlake Homes
- Clay-soil post shift. North Texas black clay contracts hard during summer drought. By September and October, hinge post footings under heavy custom gates have often settled enough to throw leaves out of alignment. The stone pillars look perfect; the footing has moved.
- Operator failure from trapped heat. Southlake’s 100-degree-plus summer days bake the inside of stone columns. Circuit boards, wiring insulation, and hydraulic fluid in high-end swing operators degrade faster here than in shadier, cooler markets.
- Weld fatigue at hinge points. Ornamental iron expands and contracts with the heat. When a gate leaf is slightly misaligned, that thermal movement becomes mechanical stress at the welds, and hairline cracks follow. We see it most on dual-leaf swing gates that have been dragging for a season or two.
- Slide gate roller wear from rail misalignment. A slide gate that rides a wavy or settling rail chews through rollers fast. Southlake homeowners often replace rollers, only to have them fail again within a year because the rail was never corrected.
Pricing for Gate Parts & Welding in Southlake, TX
A typical hinge replacement on a single swing gate leaf in Southlake runs $180 to $340, depending on the weight of the gate and whether the post also needs attention. Post replacement, which involves digging out the old footing and pouring a new concrete collar below the shrink-swell zone, typically runs $450 to $900 per post for ornamental estate gates. Rail repair runs $250 to $600 depending on length and whether we are straightening existing rail or replacing a section. Custom welding repair on ornamental ironwork runs $150 to $450 for most cracked pickets, scroll breaks, and hinge plate rebuilds. Operator work is quoted separately based on the brand and the fault. Every quote is written, agreed before work starts, and honored. Call (254) 330-8718 for a free estimate, and ask about our $50 Off Any Repair Over $250 and the standing 5% Senior and Veteran discount.
We Also Serve Cities Near Southlake
While this page focuses on Gate Parts & Welding in Southlake, our crews regularly run service calls into Colleyville, North Richland Hills, Bedford, and Hurst. The same clay soil, the same aging high-end operators, and the same heavy ornamental gates show up all around the Tarrant County line. If you are just outside Southlake, call us and we will get you scheduled the same way.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Southlake
Because the black clay under your hinge posts has contracted during the summer drought, letting the post footings settle. The stone pillars can look perfectly plumb while the buried footing has dropped two inches or more. We fix it by digging out the old footing, pouring a new concrete collar below the shrink-swell zone, re-welding the hinge barrels, and resetting the operator limits. Call (254) 330-8718 and we will laser-check your posts before recommending anything.
Yes. We grind only the immediate weld zone back to clean steel, weld at settings matched to the original metal thickness, and dress the repair flat. The surrounding finish stays intact. For painted gates, we can match the repair area so it blends in. You will see the fix if you look for it; you will not see it from the street. We also address whatever caused the crack, because welding it without fixing the misalignment means it returns next season.
No. Premature roller wear on a slide gate almost always means the rail itself is out of alignment, usually from soil settling under the track bed. Replacing rollers without correcting the rail leaves you buying another set in a year. We check the rail with a straightedge, re-bed any low sections, and only then fit new rollers rated for your gate’s weight. That sequence is what stops the repeat failures. Call (254) 330-8718 and we will inspect the rail, not just the rollers.
Yes. We disconnect and label every conductor before we break open a post, and we protect conduit and sensor leads through the whole excavation. Once the new post is set, we re-route the wiring, reconnect at the operator, and test the keypad, intercom, and safety edges before we call the job done. Your access control keeps working, and we stand behind the entire job with our written 90-Day Done Right Promise.
Put a level on the hinge post. If the post itself is out of plumb, you are looking at a footing problem, not an adjustment problem, and cranking the hinge bolts will only mask it for a few weeks. If the post is plumb but the leaf drops when the gate is released from the operator, the hinge barrels or pins are worn. We can tell you in one visit which one you have, and we quote the exact repair before we start. Estimates are free, and a live person answers the phone at (254) 330-8718 any hour of the day or night.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake and the surrounding Tarrant County communities for over 42 years.