Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Keller?
For most homeowners in Keller, gate repair typically costs between $180 and $450, depending on whether the issue involves a simple hinge adjustment, a circuit board replacement, or a mechanical drive issue. Major repairs involving gate motor replacement or welding structural damage can range from $650 to $1,400. Because every driveway configuration in neighborhoods like Bourland Oaks or Keller-Smithfield is unique, we provide upfront pricing before we turn a single bolt.
Gate Repair Cost Breakdown (2026)
When you call Ironworks Gate Co. to your home, you aren’t paying for guesswork. You are paying for the expertise of a team that has been working on gates since 1984. We believe in a square deal, which is why we break down our pricing so you know exactly what you are paying for.
| Service Type | Estimated Price Range |
|---|---|
| Basic Troubleshooting & Diagnostic | $125 - $185 |
| Hinge Repair & Welding | $220 - $480 |
| Gate Opener/Motor Logic Board Replacement | $350 - $650 |
| Safety Sensor/Photo-eye Alignment & Repair | $180 - $320 |
| Full Gate Motor/Operator Replacement | $950 - $2,400+ |
| Remote/Keypad Programming & Battery Service | $150 - $250 |
These numbers reflect the current market in Keller. The low end usually covers minor adjustments or part swaps. The high end accounts for heavy-duty commercial-grade operators or custom welding work where we have to re-fabricate a gate section. We stand by our work with our 90-Day Done Right Promise-if it is not right, we come back and make it right, every time.
What Affects Gate Repair Pricing in Keller
Factors that influence the final bill are rarely about the gate itself and more about the environment and the equipment installed. Living in Keller, we deal with specific soil conditions and weather patterns that impact gate performance over decades.
- Gate Weight and Material: A heavy wrought-iron gate common in older Keller estates puts significant strain on hinges compared to aluminum or wood. Heavier gates require more robust welding and often necessitate industrial-grade hinges to prevent sagging, which adds to labor time.
- Automation Brand Compatibility: We are trained and equipped to service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate uses a proprietary board or an obsolete motor, the cost depends on the availability of parts and the complexity of integrating a modern control board.
- Structural Integrity: If the gate posts have shifted due to the clay-heavy soil often found in North Texas, simply fixing the motor won’t solve the problem. We may need to re-weld the hinges or adjust the gate swing to compensate for the ground movement, which changes the scope of the repair.
- Access and Wiring: If the wiring from your home to the gate has been damaged by landscaping work or moisture, we have to trace the line and repair the electrical conduit. This is more time-consuming than a standard motor adjustment.
- Safety Compliance: Modern gate standards require specific safety sensors and entrapment prevention devices. If your older gate lacks these, we cannot legally or safely ignore them; bringing your system up to current safety codes is a necessary part of the repair cost.
When you call (254) 330-8718, we can often diagnose the general nature of the problem over the phone. We don’t use voicemail trees, so you will speak with a real person who understands the mechanics of your system.
How to Save on Gate Repair
The best way to save money on gate repair is to prevent the repair from becoming a replacement. We see many homeowners in Gate Repair in Keller who wait until the gate stops working entirely before calling. By that time, a simple hinge adjustment has turned into a broken motor or a bent gate frame.
We offer a few ways to keep your costs down:
- Seasonal Tune-Ups: Our $89 seasonal tune-up helps catch small issues-like loose bolts or dry bearings-before they cause expensive damage to your motor.
- Take Advantage of Standing Offers: We want to make sure our neighbors get fair value. Ask about our $50 off any repair over $250.
- Senior and Veteran Discounts: We provide a 5% discount for our senior and veteran neighbors. Please let us know when you call.
- Get a Second Opinion: If another company gave you a high estimate, call us. We offer a free second opinion on any written estimate to ensure you aren’t paying for work you don’t actually need.
We believe in upfront pricing. We settle the cost before a single bolt is turned, so you never see a surprise on the bill. If you are ready to get your gate working properly, call (254) 330-8718 for a free estimate.
FAQs - Gate Repair Cost
How much does it cost to fix a gate that won’t open in Keller?
A gate that won’t open typically costs between $180 and $450 to repair, assuming the issue is a failed capacitor, a blown fuse, or an alignment problem. If the motor itself has failed, the cost will be higher, but we will always diagnose the exact cause before suggesting a replacement.
Is it cheaper to repair or replace a gate motor?
If your gate motor is less than 10 years old and the problem is a circuit board or sensor, repair is almost always more cost-effective. If the motor is older than 15 years, parts are often obsolete, making replacement the smarter long-term investment. Call (254) 330-8718 and we can tell you which route makes sense for your specific brand and model.
Why is my gate making a grinding noise?
Grinding noises usually indicate worn-out gears, lack of lubrication, or a misaligned chain, which typically costs $250 to $500 to address. Please stop using the gate immediately if you hear grinding, as continuing to operate it can strip the gears and turn a minor repair into a full motor replacement. We recommend a trained professional inspect the drive assembly to prevent further damage.
Do you offer same-day repairs?
We prioritize urgent repairs for our neighbors in Keller and strive to complete most jobs in a single visit. Because we keep our trucks stocked with parts for the nine brands we service-including LiftMaster, FAAC, and Viking-we can often fix common issues on the spot.
Does Ironworks Gate Co. offer free estimates?
Yes, we offer free estimates for all gate repairs. We don’t believe in hiding our pricing or charging for a quote. Call (254) 330-8718 to schedule a time for us to come out, look at your gate, and give you a clear, written price.
Pricing reflects the Keller market as of 2026. Ironworks Gate Co. offers free estimates - call (254) 330-8718.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller since 1984.
What Our Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram