Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Colleyville
Gate parts and welding in Colleyville usually means one of three things: a sagging ornamental iron gate that scrapes the driveway, a broken weld on a scroll or picket that rusted through, or a hinge post that has shifted out of plumb and thrown the whole automated system off. Most of what we see in Colleyville can be repaired same-visit, at a price quoted and agreed before we turn a single bolt. Our crews carry stock hinge barrels, heavy-duty rollers, weld rod, and the operator parts to put a 500-plus pound custom gate right again, and we answer the phone 24 hours a day at (254) 330-8718.
Why Ironworks Gate Co. Is Colleyville’s Preferred Gate Parts & Welding Company
We have been working on heavy ornamental gates since 1984, and Colleyville’s stock is exactly the kind of work that keeps a welder honest. The streets off Glade Road, Cherokee Boulevard, and Pleasant Run are lined with custom estates whose entries were built around 1990s and 2000s masonry pilasters and dual wrought-iron swing gates. Those gates weigh more than anything a standard fence crew touches. When a hinge on a 14-foot ornamental steel leaf fails, the repair is not a trip to the hardware store. It is knowing which barrel hinge matches the leaf weight, whether the post footing has moved, and how to set the operator limits so the auto-close cycle does not bind on the safety photocell. That is the work we do, and we do it here regularly. Our technicians are background-checked, uniformed, and guided by one standing rule: Krafted right, every time. Every job closes with the 90-Day Done Right Promise in writing. If something is not right, we come back and make it right. No argument, no paperwork.
Victor Salinas runs our Colleyville work with the same care he has brought to gate jobs across North Texas. He believes the 400th job gets the same attention as the first. That is not a marketing line. It is the reason a homeowner on a quiet cul-de-sac in 76034 will call us back ten years after we hung a gate and ask for the same crew.
Our Gate Parts & Welding Services in Colleyville
Hinge Replacement
Hinge failure on a Colleyville estate gate is rarely the hinge alone. The barrel wears, the leaf drops, and the operator starts fighting the added friction until the limit switches trip. We replace hinges rated for the actual leaf weight, which on most Colleyville ornamental gates runs between 300 and 700 pounds per leaf. We set the reveal, shim only with steel, and adjust the operator so the gate closes like it did the day it was hung. A hinge replacement on a typical dual swing entry in Colleyville runs $280 to $520 per leaf, parts and labor included.
Post Replacement
Colleyville’s Blackland Prairie clay moves more than most people realize. A masonry pilaster that leans half an inch over a dry summer is enough to make an automated swing gate reverse for no apparent reason. Before we touch an operator board on a binding gate, we check pilaster plumb with a level and a plumb bob. If the post footing has cracked or the anchor bolts have rusted, the right repair is post replacement or footing repair, not another limit-switch adjustment that will fail again in a season. Post replacement on a steel or masonry entry in Colleyville typically runs $650 to $1,400 depending on footing depth, column size, and whether the operator arm needs re-pinning.
Rail Repair
Slide gates in Colleyville run on steel rail and a rack-and-pinion drive. The rail collects fine Blackland dust after every rain, and when the rack wears, the gate jerks and stops short. We see this most often on larger estate lots where the gate travels 16 feet or more. Rail repairs run from clearing and re-truing the existing rail at $180 to $350 up to full rail and rack replacement at $900 to $1,800 for a long commercial-style slide. We set the rack mesh by hand, grease with a dry lubricant that does not attract that fine clay, and reset the open and close limits on the operator.
Custom Welding
Broken scrolls, cracked pickets, rusted-through bottom rails, a bent operator arm bracket. All of it can be welded on site from a truck-mounted MIG or stick rig. On powder-coated ornamental iron, we grind the break clean, weld hot enough to penetrate the old steel, and apply a zinc-rich cold galvanizing primer before touching up. It will not match a factory powder coat perfectly, but it will bond and it will not rust out again next spring. Custom welding on a cracked scroll or picket in Colleyville runs $150 to $350 for most repairs. A snapped bottom rail or a failed gate frame corner runs $400 to $800 when we have to cut and sleeve the rail.
That is the full scope of what our Gate Parts & Welding team handles on a daily basis: hinges, posts, rollers, latches, locks, rails, and weld repairs on ornamental iron, steel, and aluminum.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
Most automated gates in Colleyville carry LiftMaster, Elite, or Viking operators, and a good number on the newer estates run FAAC or Mighty Mule. We are trained and equipped on nine gate-automation brands, and we stock the wearable parts those operators eat through: limit switch assemblies, gearboxes, photocell eyes, loop detector boards, and remote receivers. If a gate in Colleyville needs a LiftMaster limit switch, we do not have to order it and come back next week. We carry it on the truck.
Common Gate Parts & Welding Problems We See in Colleyville Homes
- Hinge post lean from clay soil movement. The Blackland Prairie clay under Colleyville swells after spring rain and contracts hard in a dry summer. That seasonal shift tilts masonry pilasters enough to bind swing gates and trip the obstruction sensors. We check post plumb before touching the operator, because a limit-switch adjustment on a leaning post is a temporary fix.
- Worn rack and pinion on slide gates. Long slide gates on estate lots chew through rack teeth, especially when the rail has collected fine clay dust and grit. The gate jerks, stops short, and throws limit errors on LiftMaster or BFT boards. The fix is a new rack or a re-meshed pinion, not a new operator.
- Rusted hinge barrels and anchor bolts. Colleyville’s summer heat plus winter freezes and a little irrigation overspray is rough on bare steel. Hinge barrels seize, anchor bolts rust in place, and a gate that worked fine in May is dragging in November. We replace with sealed bearing hinges and galvanized or stainless anchors where the post sees regular water.
- Broken welds on ornamental scrolls and pickets. The flat black finish on a Texas ornamental iron gate hides a lot of fatigue. Heat cycling over twenty or thirty years eventually cracks the welds at scroll joints and picket bases. A cracked scroll is a quick weld repair if caught early, and a full fabrication job if it is left to rust through.
Pricing for Gate Parts & Welding in Colleyville, TX
You cannot quote a Texas gate job blind, but you can give a homeowner honest ranges. Here is what we charge in Colleyville, and we hold to the estimate once it is written.
- Hinge replacement: $280 to $520 per leaf
- Post replacement or footing repair: $650 to $1,400
- Rail repair or replacement: $180 to $1,800 depending on length and wear
- Custom welding (scroll, picket, bracket): $150 to $800 depending on the break
- Gate roller replacement: $120 to $320 per roller
- Latch and lock repair or replacement: $95 to $280
The price is settled before work starts. If we find hidden damage once the gate is opened up, we stop, show you, and agree on the change before turning another bolt. Estimates are free. Call (254) 330-8718 and we will walk through what you are seeing and give you a written number.
We Also Serve Cities Near Colleyville
Our Gate Parts & Welding in Colleyville crews work the surrounding Tarrant County cities too. If your gate is in Bedford, Hurst, Southlake, or North Richland Hills, the same crew that works Colleyville estates can be at your driveway with the same parts truck and the same written promise. Call the main line and we will route the nearest truck.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Colleyville
The most common cause on Colleyville estate gates is a shifted masonry pilaster, not an operator fault. When Blackland Prairie clay dries and contracts, the post can lean as little as half an inch, which changes the swing arc just enough for the gate to bind and the obstruction sensor to reverse the cycle. We check post plumb first, re-set the hinge if needed, then recalibrate the operator limits. Call (254) 330-8718 for a free assessment.
Yes, with the honest caveat that the weld area will need a touch-up and will not perfectly match the original powder coat. We grind the break clean, weld hot for full penetration, then prime with a zinc-rich cold galvanizing compound before applying a black touch-up. The repair will be sound and rust-protected. A typical scroll weld in Colleyville runs $150 to $250.
More often than not it is the rack, the rollers, or the rail, not the operator. A worn rack-and-pinion or a rail packed with Blackland clay dust makes the gate jerk and throws limit errors on LiftMaster, FAAC, or BFT boards. We inspect the mechanical drive before recommending any operator work. Many jerky slide gates in Colleyville are fixed for $180 to $600 in parts and labor, far less than a new operator. Call (254) 330-8718 and we will tell you straight which one it is.
We use sealed bearing barrel hinges or adjustable weld-on heavy-duty hinges rated for the leaf weight, typically 600 to 800 pounds working load, welded or bolted to the post and gate frame. The hinge must be sized to the gate, not whatever is on the shelf at a big-box store. A Colleyville ornamental leaf that heavy needs a hinge that will not oval out in three years. We stock them in the truck.
It depends on how far the pilaster has moved and whether the footing is cracked. If the column is leaning because the footing failed, yes, the masonry needs to be rebuilt or stabilized before we weld the gate and set the limits, or the repair will not last a season. We can coordinate with a local mason, or if the post is steel and set in a sound concrete footing, we can often re-plumb it ourselves. We will give you an honest answer on the first visit.
If your Colleyville gate is sagging, binding, jerking, or broken at a weld, call (254) 330-8718. A live person answers, 24 hours a day, and we will schedule a technician to come look at it, give you a written price, and fix it right. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville gate systems with the same written promise on every job.