Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haslet
Gate parts and welding in Haslet comes down to one thing most homeowners don’t realize until a gate fails: the clay soil under your posts moves more than the gate does. We replace hinge posts that have heaved out of plumb, weld cracked rails back square, and rebuild farm gates on acreage lots across Haslet every week. A sagging gate in Haslet Estates is not the same job as a sagging pipe gate off Blue Mound Road, and we treat them accordingly. Call us at (254) 330-8718 and we’ll send a technician who has actually welded in this soil, not someone reading a manual in your driveway.
Why Ironworks Gate Co. Is Haslet’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has spent over 42 years earning a reputation in North Tarrant County for one thing: the gate works when we leave, and it keeps working. Haslet homeowners call us because we understand the split personality of this city. One job is a powder-coated steel driveway gate on a quarter-acre lot in a master-planned community. The next is a 16-foot livestock gate on five acres where the nearest neighbor is a quarter mile down the road. Both require Gate Installation - Haslet, welding, and parts, but they fail for different reasons and need different fixes.
Our crews serve Haslet regularly, coordinated from our Dallas-Fort Worth metro office and dispatched directly to your property. We answer the phone with a live person 24 hours a day, 7 days a week. When a horse property gate off Sendera Ranch Drive won’t latch at 9 p.m., someone picks up and schedules a next-morning visit. That matters more than most people think until they’ve heard a voicemail at midnight.
Victor Salinas, who leads our team, holds every technician to the K.E.Y.S. standard: Krafted right, Every time, Your home first, Standing behind it. Every job, including the 400th one, is protected by our written 90-Day Done Right Promise. If it is not right, we come back. No paperwork, no argument.
Our Gate Parts & Welding Services in Haslet
Hinge Replacement
Hinges carry the full weight of the gate, and on Haslet’s shrink-swell clay, a hinge post that moves just half an inch becomes a gate that drags, a latch that misses, and a motor that burns out fighting the misalignment. We replace worn or undersized hinges with heavy-duty weld-on versions rated for the gate’s actual weight, not the weight the original builder assumed. On Haslet acreage gates, we often upgrade to greasable ball-bearing hinges that survive decades of wet-dry cycles without seizing.
Post Replacement
The most common welding-adjacent job we do in Haslet is not a weld at all. It is digging out a hinge post that the black clay has shoved out of square and pouring a new footing sized for the Fort Worth Prairie. Standard 18-inch footings are not enough here. We dig deeper, use more concrete, and set posts in a way that survives the next wet spring. Every post replacement includes realignment of the gate and re-welding or re-hanging of hinges so the gate swings level from the day we leave.
Rail Repair
Welded steel rails crack over time, especially on heavy estate gates that have flexed through years of soil movement and heat. We repair cracked horizontal rails, reinforce weak joints, and often add gussets at stress points where rust and fatigue have done their work. On pipe-and-panel farm gates throughout the rural corners of Haslet, we regularly weld new cross-bracing to restore rigidity to gates that have gone soft after 15 or 20 years in the sun.
Custom Welding
Some parts are not on a shelf anywhere. When a Haslet homeowner needs a custom hinge plate for a non-standard post, a welded repair to an ornamental iron finial, or a gate widened to fit a new mower or horse trailer, our welders handle it on site. Custom welding is where Ironworks Gate Co. brings 42 years of craft to the job. We fabricate, fit, and weld the piece in place, then finish it to match the existing metal as closely as possible. The result looks original, because it was made for your gate, not ordered from a catalog.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haslet
We service and stock parts for the gate operators Haslet homes actually have. Most of the automated swing and slide gates installed during the 2005 through 2015 buildout run on LiftMaster, FAAC, or Linear motors, and many still do, so we offer Haslet Liftmaster service as part of our coverage. Some acreage properties use BFT or Viking operators on solar because running conduit half a mile down a driveway is impractical. Because we service all nine major brands and keep common parts on our trucks, most Haslet repairs are completed in a single visit. No waiting a week for a gear to ship from a distributor.
Common Gate Parts & Welding Problems We See in Haslet Homes
- Clay heave on swing gates: The expansive black clay around Haslet lifts hinge posts every wet-dry cycle. A gate that sagged two inches after last spring’s rains is probably not a hinge problem. It is a footing problem, and the fix is post replacement before the hinges tear out completely.
- Synchronized operator death: Last spring, our crews replaced motors on three adjacent streets in Haslet Estates inside two weeks. The original builder installed the same operator on every house around 2010, and after 12 to 15 years of North Texas heat and clay movement, they all failed within the same season. If your neighbors are suddenly calling about dead gate motors, yours is likely next.
- Frost-heaved slide track anchors: The February 2021 freeze cracked concrete footings and sheared anchor bolts on slide gate tracks all over the I-35W corridor. Several Haslet homeowners we visited that spring had never heard the rack and pinion grind before, and the cause was anchors that had been ripped loose by the ice cycle.
- Worn latch and lock hardware on livestock gates: On rural Haslet lots, cattle and horses lean on gates. Latches bend, locks bind, and gates drift out of alignment under animal pressure. We replace latch hardware with heavy-duty versions designed for livestock, not decorative entry hardware, and we weld reinforcement where animals have bowed the frame.
Pricing for Gate Parts & Welding in Haslet, TX
Here is what Haslet homeowners should expect to pay for the most common gate parts and welding work in this market. Hinge replacement on a single residential swing gate typically runs $180 to $340 per hinge, including parts and labor. Post replacement with a deepened concrete footing sized for local clay runs $450 to $900 per post depending on gate weight and whether we need to excavate old concrete. Rail repair and custom welding work usually falls between $150 and $600, depending on the length of the weld and how much reinforcement the gate needs. Full pipe gate fabrication for acreage entrances starts around $800. Every price is quoted and agreed in writing before any work starts. We never hand you a bill that surprises you. Call (254) 330-8718 for a free estimate on your specific gate.
We Also Serve Cities Near Haslet
Ironworks Gate Co. provides Gate Parts & Welding service to Haslet and the surrounding North Tarrant communities, including Keller, North Richland Hills, Newark, and Southlake. If you’re in one of those cities, you get the same crew, the same 90-Day Done Right Promise, and the same live person answering the phone at (254) 330-8718. Learn more about our full service area and what a specialist can do for your gate on our Gate Parts & Welding in Haslet page.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haslet
The synchronized failures happen because hundreds of homes in Haslet Estates and similar neighborhoods were built between 2005 and 2015 with identical builder-installed gate operators. Those motors are now crossing the 12 to 15 year mark at roughly the same time. A wet spring saturates the clay soil, posts shift, gates fall out of alignment, and motors that were already near the end of their service life burn out fighting the misalignment. When one neighbor’s gate dies, the block is usually not far behind. If your gate is over a decade old, a seasonal tune-up now costs less than an emergency motor replacement later. Call (254) 330-8718 for a free estimate.
You usually need a post fix, not a new gate. The gate’s steel frame is likely fine. What fails on rural Haslet lots is the hinge post footing, which was probably too shallow when it was originally set. As the black clay expands and contracts, the post moves and the gate sags. We dig out the old post, pour a deeper footing matched to Fort Worth Prairie soil conditions, and re-hang the gate on welded heavy-duty hinges. The gate swings level again. We can tell you in one visit whether your gate frame is still sound or whether the sag has twisted it far enough that new steel makes sense. Call (254) 330-8718 for an honest assessment.
Yes. Solar operators are common on Haslet acreage lots where running conduit from the house to the gate would mean trenching hundreds of feet or more. We install solar-powered gate openers that handle wide, heavy farm gates and have enough battery reserve for weeks of cloudy weather. The key is matching the panel and battery bank to the gate’s weight and the number of open-close cycles per day. We’ll size the system for your gate, not sell you a kit off the shelf. Call (254) 330-8718 and we’ll assess your gate and sun exposure.
After a hard freeze like February 2021, the most common failures are cracked concrete footings under the track and sheared anchor bolts where the track meets the concrete. Water gets into micro-cracks in the concrete, freezes and expands, then the anchors let go. The track shifts, the rack and pinion binds, and the gate either jams or the motor overheats trying to move it. We replace the anchors, level the track, and for properties where the damage happened twice, we pour new reinforced footings designed for temperature swings. Call (254) 330-8718 and we’ll diagnose the damage before you replace a motor that wasn’t the problem.
How do I keep livestock from pushing through a sagging gate on my Haslet property?
Livestock lean on gates, and a gate that has sagged or bowed tells them there is room to push. The fix starts with rebuilding the structure: replacing moving posts with deeper footings, welding reinforcement where animals have bowed the frame, and installing heavy-duty latch hardware that horses and cattle cannot pop open. We routinely weld new braces into pipe-and-panel gates on Haslet ranchette properties and set the hinges so the gate swings freely enough that stock don’t feel the need to force it. A gate that is square and latched does not invite pushing. Call (254) 330-8718 for a free estimate.
Haslet’s Clay Soil and the Gate Parts Problem No Generic Page Covers
Here is what matters about Haslet that a generic gate parts guide won’t tell you. The clay under your gate posts is expansive. It swells when wet and shrinks when dry, and it does this in cycles that are hard on anything anchored in the ground. Haslet’s 2005 through 2015 automated gate operator installs are now failing in synchronized waves across entire subdivisions. A single wet spring on this soil can knock dozens of identical builder-installed swing gates out of plumb and shear anchor bolts on slide tracks all at once. This failure pattern is largely absent in fully built-out neighbors like Keller or Saginaw, where the building stock settled earlier and replacement cycles are more scattered.
What that means for you is practical. If your gate is leaning, the post footing is probably the culprit. If your motor is whining, the gate may be binding because the clay moved, not because the motor is worn out. And if your neighbors’ gates are failing around you, yours is in the same soil. We build post replacements and welding repairs specifically for these conditions. The same job on a different soil would be engineered differently. On the Fort Worth Prairie clay, we pour deeper and anchor harder, and we have been doing it that way for over 40 years.
What We See Driving Through Haslet
Last March our crew was called to a ranch-style property off Blue Mound Road where a 16-foot pipe-and-panel farm gate had sagged so badly the latch no longer reached the post. The hinge post, a 4×4 set in clay that had heaved from winter to spring, had pulled the entire gate out of square. We replaced the post footing with a deeper concrete pour sized for the Fort Worth Prairie clay, then welded new heavy-duty hinges to restore the swing and added a LiftMaster solar gate opener so the owner could open it from the truck without leaving the cab. That is the kind of job that only comes from knowing this soil and these gates. It is also why our Gate Parts & Welding team carries welding gear and post-hole equipment on the truck, because Haslet’s rural and suburban gates fail in the same week, not the same month.
Haslet sits at a sharp rural-to-suburban frontier in the Alliance corridor. Our technicians shift between automated ornamental iron driveway gates on master-planned community homes and heavy-duty agricultural pipe-and-panel gates on the surrounding horse properties and ag-exempt acreage lots that still ring the city. Suburban estate gate one stop, working ranchette gate the next. That dual-market reality means we stock parts for both ends of the spectrum: delicate Gate Access Control in Haslet keypad-controlled operators and heavy weld-on hinges that can hold a 20-foot livestock gate in a north wind.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haslet and North Tarrant County with gate repair, welding, and automation for over 42 years.
Call Ironworks Gate Co. for Gate Parts & Welding in Haslet
If your gate is sagging, your operator is grinding, or your latch will not stay closed, call us. A live person answers at (254) 330-8718 any hour, any day. We will schedule a visit, show up when we say we will, quote the work in writing before anything starts, and back the whole job with the 90-Day Done Right Promise. Haslet has given us 42 years of gates to fix. We plan to be here fixing them for 40 more.