Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Haslet, TX
A gate that won’t open in Haslet isn’t a small annoyance. It’s your morning commute blocked, your horses waiting at the fence line, your home sitting open to Blue Mound Road traffic. Most gate repairs in Haslet run between $180 and $520 depending on what failed, and we can usually have a technician at your driveway the same day you call. We work on everything from ornamental iron estate gates in Haslet Estates to welded pipe ranch gates on the ag-exempt acreage off School House Road. Call (254) 330-8718 and a live person answers, day or night.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Haslet Homeowners Choose Ironworks Gate Co.
Ironworks Gate Co. is not a handyman service that sometimes touches gates. Gates are the entire job. Victor Salinas and his crew work on driveway gates, estate gates, and ranch gates all over Haslet, from the subdivisions east of Highway 156 to the horse properties south of Avondale-Haslet Road. We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, and Mighty Mule, so what’s on your driveway is almost certainly something we’ve already fixed this month on someone else’s. Our technicians are background-checked, uniformed, and show up when we say. And every job we do in Haslet is covered by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Gate Repair Services We Offer in Haslet
Gate Repair
When a Haslet gate won’t close, sags on its hinges, or drags on the drive, we find out why it failed before we replace a single part. That distinction matters on North Texas clay, where the problem is often the post or footing underneath the gate rather than the hinge itself. Learn more about our Gate Repair in Haslet.
Gate Installation
A gate installed right on Haslet’s expansive soil starts with footings sized for the clay, not for the brochure. We build and hang ornamental iron, powder-coated steel, and welded pipe ranch gates to hold plumb through the wet-dry cycle. Learn more about our Gate Installation in Haslet.
Gate Motor & Opener
Operators installed during Haslet’s 2005-2015 build boom are now failing on a schedule, and many were never serviced after the first install. We diagnose the motor, the control board, the limit switches, and the power run before recommending a repair or replacement. Learn more about our Gate Motor & Opener in Haslet.
Gate Access Control
Keypads, intercoms, loop detectors, vehicle sensors, and phone-entry systems all land in this bucket. If your gate opens for everyone except you, we trace the signal from the remote to the receiver. Learn more about our Gate Access Control in Haslet.
Gate Parts & Welding
Sometimes the right repair is a weld, not a part swap. We carry gate hinge stock, weld plate steel, and rebuild bent frames in our own shop, then powder-coat or paint to match. Learn more about our Gate Parts & Welding in Haslet.
Neighborhoods We Serve in Haslet
We work across the entire Haslet area, from the master-planned streets of Haslet Estates to the rural acreage off Intermodal Parkway and the mixed lots along Harmon Road. Typical response time in Haslet is same-day for most repair calls, next morning at the latest unless you’d rather set a scheduled appointment.
- Haslet Estates
- Sendera Ranch
- Harvest Ridge
- Northstar
- Caraway
Why Haslet’s Climate & Housing Affect Gate Repair
Haslet sits on the Fort Worth Prairie’s shrink-swell clay, and that soil is the single biggest reason gates here fail. A wet spring swells the ground under a post. A baked August shrinks it back. The post moves a quarter-inch, the swing gate drops out of plumb, and suddenly the latch bolt won’t line up or the operator’s arm binds. On slide gates, shifting footings shear anchor bolts right out of the concrete track. We see this every season in Haslet. The freeze that hit the I-35W corridor in February 2021 also taught a lot of homeowners a hard lesson: gearboxes on unserviced operators seize when ice forms inside, and hydraulic lines crack. A $89 seasonal tune-up before the cold would have caught most of those failures. It’s cheap insurance on a gate that has to open twice a day, every day.
Pricing for Gate Repair in Haslet
- Hinge replacement (pair, standard wrought iron): $180-$320
- Gate realignment and latch adjustment: $140-$260
- Operator control board replacement: $240-$480
- Full operator replacement (motor and arm, installed): $850-$1,900
- Weld repair on a bent steel frame: $160-$420
- Seasonal tune-up including chain tension and limit switch calibration: $89
Every quote is written, agreed upon, and locked before work starts. Ask about the $50 Off Any Repair Over $250 and the senior and veteran 5% discount.
Service Area - Cities Near Haslet
We serve Haslet and the surrounding cities regularly. If you’re in Keller, North Richland Hills, Newark, or Southlake, our technicians cover those routes too.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Haslet
How much does gate repair cost in Haslet?
Most Haslet gate repairs run between $180 and $520, with full operator replacements starting around $850. The final number depends on what failed, but you’ll have a written price agreed upon before the work begins. Call (254) 330-8718 for an exact quote, always free.
Can you come to Haslet today?
In most cases, yes. Same-day dispatch is common in Haslet for repair calls. Call (254) 330-8718 and you’ll get a live person who can confirm the next available appointment, not a voicemail tree.
What causes gates to fail in Haslet specifically?
The Fort Worth Prairie shrink-swell clay under your gate post moves with the seasons, and that movement is what knocks swing gates out of plumb and yanks slide track footings loose. You’ll notice the gate starts scraping the drive or the latch stops lining up before it fails completely.
Do you work on ranch gates or only driveway gates?
Both. The Haslet area still has working horse properties and rural acreage with welded pipe and livestock gates alongside the suburban driveway gates in Haslet Estates and Sendera Ranch. We’re equipped for either, and we know the difference when we arrive.
What gate opener brands do you service in Haslet?
We service nine major automation brands, including LiftMaster, FAAC, and Mighty Mule. If your Haslet operator is from one of those three, chances are we have the part on the truck. Call (254) 330-8718 and have your opener model number ready.
Contact Ironworks Gate Co. in Haslet
If your gate isn’t closing, isn’t opening, or just sounds wrong when it tries, call (254) 330-8718. A live person answers 24 hours a day, 7 days a week. We’ll give you an honest read on what’s wrong, a written price before work starts, and a crew backed by the 90-Day Done Right Promise. Visit our home page to learn more about the company and the K.E.Y.S. values code behind it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haslet and the surrounding North Tarrant County area.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haslet Customers Say
"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson