Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Southlake
A gate that won’t open, drags on the driveway, or hums but doesn’t move is more than a nuisance in Southlake. It’s a security gap on a property built around privacy. Most gate repairs in Southlake run $185-$475, and our crews reach most Southlake neighborhoods the same day you call. For over 42 years, Ironworks Gate Co. has repaired the kind of heavy, custom automated gates this city is known for, and every job comes with our written 90-Day Done Right Promise. Call (254) 330-8718 and a live person will answer, day or night.
Why Ironworks Gate Co. Is Southlake’s Preferred Gate Repair Company
Southlake’s custom estates demand a different standard of gate work. The ornate dual-leaf wrought iron gates on Canterbury Court, Monticello, and along Shady Oaks Drive aren’t the kind a general handyman can tune with a wrench. They weigh hundreds of pounds, hang on engineered hinge posts, and run on commercial-grade operators. Victor Salinas, our owner, built Ironworks Gate Co. around exactly this kind of work: heavy metal, precise alignment, and automation that has to work every time, without exception.
We arrive at Southlake homes with uniformed, background-checked technicians who understand clay soil, stone pillar mounts, and the wiring that runs beneath your driveway. We service nine automation brands, including FAAC, BFT, and Linear, so the correct fix happens on the first visit. Our Southlake customers call us back because we quote the price before we touch a bolt, and we stand behind the work in writing. That’s the Keystone Standard, and it applies to every gate we repair.
Our Gate Repair Services in Southlake
Electric Gate Repair
When a Southlake gate stops responding to a keypad, remote, or intercom, the issue is rarely one single part. It’s usually a chain of small failures: a control board stressed by summer heat inside a stone column, wiring insulation cracked from years of exposure, or a limit switch knocked out of adjustment. We trace the whole circuit before replacing anything, which keeps the repair honest and the final bill predictable. Most electric gate repairs in Southlake are completed in a single visit.
Automatic Gate Repair
Southlake’s automated gates run on operators that were installed when the homes were built, often 15 to 25 years ago. LiftMaster LA500s, Elite swing operators, and FAAC rams are common here, and right now they’re reaching the age where they need more than a new battery. We diagnose the operator first, then the mechanicals, because a gate that struggles to move is often the real reason an operator burned out. A typical automatic gate repair in Southlake runs $225-$550, depending on the operator and the extent of the load problem.
Hinge & Post Repair
Few things damage a Southlake gate faster than a compromised hinge post. The black clay under this part of Tarrant County expands and contracts with every rain and drought cycle, and stone pillars on 20-year-old footings move with it. We re-set posts, reinforce hinge weldments, and replace worn bearings so the gate hangs square and swings true. This is the repair that extends the life of the entire system, and it’s one our Gate Repair team handles weekly across the 76092 zip code.
Gate Realignment
A Southlake gate that drags on the driveway apron in September has usually not lost its hinges. The footing moved. The clay soil contracted through a long hot summer, the post tilted a fraction of a degree, and a 600-pound leaf now scrapes concrete where it used to clear it by an inch. We bring the gate back to level, correct any sag in the leaf, and reset the operator limits so the gate closes without strain. Gate realignment in Southlake typically runs $200-$400 per leaf, including travel and adjustment.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
Our technicians are factory-trained on nine gate-automation brands, and on Southlake service calls we most often work on FAAC, BFT, Linear, and LiftMaster equipment. Because Southlake’s gates lean toward commercial-grade hardware paired with custom metalwork, we keep common boards, limit switches, and remotes stocked in our Dallas-Fort Worth service vehicles so the fix isn’t delayed by a parts order. Whether your Southlake gate runs on a 20-year-old Viking ram or a newer Ghost Controls board, we can have it running again without waiting on a parts truck from out of state.
Common Gate Repair Problems We See in Southlake Homes
- Clay soil heaving gate posts out of plumb. Southlake’s expansive black clay shrinks in summer drought and swells with the first fall rains. Over a single season, a stone pillar can tilt enough to drag a heavy gate leaf on its apron, and that load is what kills operators.
- Operators overheating inside stone columns. North Texas summers push temperatures past 100°F, and a gate operator bolted inside a solid stone pillar has almost no ventilation. Circuit boards degrade faster, wiring insulation cracks, and hydraulic fluid on high-end swing operators breaks down.
- Aged commercial operators failing under load. Many Southlake gates were installed with LiftMaster LA500s or similarly sized commercial operators in the 2000s. Fifteen to twenty-five years later, motors that have spent their life pushing a slightly misaligned 800-pound gate finally quit, often misdiagnosed as a simple electronic failure.
- Custom ornamental gates wearing at hinge weldments. Wrought iron gates on Monticello and North White Chapel Boulevard are heavy by design, and every opening cycle places stress where the hinge meets the frame. We repair cracks, reinforce weldments, and re-hang gates so the finish stays intact and the structure stays sound.
Pricing for Gate Repair in Southlake, TX
Southlake’s gate repair market runs higher than the metro average because the equipment is heavier, the metalwork is custom, and the properties are larger. Here’s what we typically see:
- Electric gate repair (keypads, boards, wiring): $185-$425
- Automatic gate repair (operator diagnosis and repair): $225-$550
- Hinge and post repair (re-setting posts, replacing bearings): $275-$700
- Gate realignment (sag correction, leaf leveling): $200-$400 per leaf
- Weld and rust repair (cracked pickets, failing hinge welds): $150-$600, depending on the extent
Every price is quoted and agreed before any work starts. You’ll know the number before we turn a single bolt, and the price we quote is the price you pay. We don’t surprise Southlake homeowners with change orders or add-ons. Most repairs include our $50 Off Any Repair Over $250 offer, and we always honor a 5% discount for seniors and veterans. Call (254) 330-8718 for a free estimate.
We Also Serve Cities Near Southlake
Beyond Southlake, our technicians regularly work across the neighboring communities of Colleyville, North Richland Hills, Bedford, and Hurst. Whether you’re in the western part of Southlake near Carroll Senior High School or just across the city line on the Colleyville side, the same crews, the same written guarantee, and the same live-answer phone line cover your gate. If your property is in the 76092 zip code or one of the surrounding cities, we can reach you quickly.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Southlake
Your gate post footing is shifting in Southlake’s expansive clay soil. Months of summer heat contract the clay and pull moisture away from the footing, allowing the post to tilt slightly toward the driveway. What looks like a hardware problem is almost always a soil problem, and the fix is post re-setting and gate realignment, not necessarily a new operator. Call (254) 330-8718 and we’ll confirm what’s moving before recommending any repair.
Not necessarily. A tilted post or sagging leaf overloads the operator and makes it run hot, stall, or trip its limits, but the operator is often still functional once the gate is realigned. We always correct the mechanical issue first and test the operator under proper load before recommending replacement. That sequence has saved Southlake homeowners thousands over the years. Call us for a straight diagnosis.
We remove the operator from the pillar, inspect the board and wiring for heat damage, and install proper ventilation or relocate the unit if the pillar can’t breathe. Operators mounted inside solid stone columns in Southlake routinely see internal temperatures 30-40°F above ambient, and that’s what kills boards on 15-to-25-year-old systems. Our techs have repaired dozens of these, and we’ll tell you honestly if relocation is the long-term fix.
UL 325-compliant automated gates require monitored entrapment protection such as photo eyes or contact edges that reverse the gate if an obstruction is detected. Many older Southlake estates still run operators that don’t meet current safety standards, and we can retrofit your gate with the proper edges and sensors during any repair visit. Your family, pets, and delivery drivers deserve a gate that stops safely. Call (254) 330-8718 to have yours checked.
Yes. We weld and reinforce custom wrought iron gates using techniques that protect the surrounding finish, then touch up the repaired areas to blend with the existing patina or paint. The goal is that your gate looks the way it did, but swings strong for another two decades. Victor Salinas and his crew have repaired hundreds of ornamental Southlake gates, and the 90-Day Done Right Promise covers every weld we make.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake and the surrounding Dallas-Fort Worth area. Our dispatch and scheduling are coordinated from a Dallas-Fort Worth office, with crews serving Southlake locally.