Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
A driveway gate that won’t open is more than a nuisance in Keller. It blocks your car in the garage, leaves packages exposed at the street, and tells anyone paying attention that the house is vulnerable. Gate repair in Keller is what we do every day. If you’re searching for aGate repair company that answers the phone, shows up when promised, and fixes the actual problem (not just the symptom), call Ironworks Gate Co. at (254) 330-8718. We know Keller’s gates, Keller’s soil, and Keller’s subdivisions. This page explains what repairs actually cost, what goes wrong, and how we get you moving again, usually in a single visit.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Repair Company
Keller isn’t a place where a generic handyman’s gate knowledge is enough. The sheer number of ornamental iron driveway gates here, installed during the late-1990s and 2000s building boom, means we see a specific set of failures on a regular basis. Our techs know that a gate dragging on a driveway in Hidden Lakes off Bourland Road is often a clay-heaved hinge post, not a weak opener. That local pattern recognition means faster diagnosis and fewer repeat calls.
Homeowners in Keller have also learned to be skeptical of contractors who overpromise. Victor Salinas, who leads Ironworks Gate Co., built the company on a simple rule: every job gets a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing. That promise applies to every gate repair, every hinge replacement, every operator swap we do in Keller.
And when your gate fails on a Saturday morning with the car stuck inside the garage, you want a live person. Our phone is answered by a human being 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback queue. A person who can dispatch a uniformed, background-checked technician to your street in Keller, often the same day for emergency repairs.
Our Gate Repair Services in Keller
Electric Gate Repair
Most Keller driveway gates are automated, and the operator is usually the first thing to go. Early-2000s LiftMaster and Elite units are hitting the end of their service life all over town. We diagnose the full circuit path, from the control board to the loop detector to the safety edges, so we replace what’s failing, not what’s convenient. If your keypad works but the gate won’t respond to your car, the problem is often the loop detector or the receiver board, not the opener motor. Call (254) 330-8718 and we’ll explain exactly what’s wrong before we turn a single bolt.
Automatic Gate Repair
Automatic gates combine mechanical weight with electrical control. In Keller, the Blackland Prairie clay under your driveway complicates things. When the clay expands and contracts through wet and dry cycles, the post shifts. The gate sags. The operator strains. A technician who only knows electronics will swap a motor and leave you with a gate that fails again in six months. We fix the mechanical alignment first, then the automation. That’s the Ironworks difference, and it’s why homeowners throughout Keller call us back for annual tune-ups rather than emergency fixes.
Hinge & Post Repair
Hinges are the unsung workhorses of any gate. In Keller, where HOA deed restrictions in communities like Shinbone Ridge often require ornamental iron, the gates are heavy. That weight concentrates on hinge pins, which rust and wear. A sagging gate is almost always a hinge problem at its root. We replace hinge pins, weld cracked hinge plates, and when necessary, re-set the post in a new concrete footing. If the post has heaved out of plumb, we re-dig, re-anchor, and re-plumb before reinstalling the gate. That’s the only way a repair holds.
Gate Realignment
A gate that scrapes the driveway or won’t latch is out of alignment. In Keller’s clay soil, misalignment is common even on gates that have been perfectly maintained. North Texas droughts pull moisture out of the ground and the post leans. We bring gates back to their proper swing arc, adjust the hinge spacing, and reset the operator limits so the gate opens and closes without strain. This prevents the cascade effect where a dragging gate burns out an expensive operator.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We service the opener brands most commonly installed in Keller’s original equipment: LiftMaster, DoorKing, and Elite, along with several others. We keep common replacement parts, control boards, and safety accessories in stock so we can complete most Keller repairs in a single visit. If you have an older Mighty Mule on a second gate on the property, we handle those too. The point is that you don’t need to call one company for the opener and another for the ironwork. We handle both sides of the gate, every time.
Common Gate Repair Problems We See in Keller Homes
- Clay-heaved hinge posts: The Blackland Prairie clay in Keller expands dramatically with rain and contracts in drought. That cycle pushes posts out of plumb, causing swing gates to drag and overload the operator. This is a repair driver every dry year.
- Simultaneous operator failures: Many of Keller’s original early-2000s LiftMaster and Elite operators are reaching the end of their service life at the same time. The real issue is often a cracked anchor bolt on the operator pedestal, which means a motor swap alone won’t hold alignment.
- Rusted hinge pins on HOA-mandated iron gates: Communities like Bear Creek Estates require ornamental iron, which rules out lighter aluminum replacements. Heavy iron gates concentrate stress on hinge pins, and rust does the rest. Welding and sag correction are often needed, not just a new opener.
- Safety photocell misalignment: When a gate frame shifts from soil movement, the photocell beam drifts out of alignment and the gate faults out or reverses. This looks like a motor problem but it’s really a geometry problem. We re-align the gate first, then reset the safety system.
Pricing for Gate Repair in Keller, TX
We believe in upfront pricing, and we put the final number in writing before any work begins. That’s the square deal. Here’s what gate repairs in Keller typically run, based on the jobs we see in this market:
- Hinge replacement and gate realignment: $180-$380
- Operator swap (parts included, standard-duty): $550-$950
- Post re-set and new concrete footing: $350-$700
- Weld repair of cracked or rusted frames: $250-$600
- Full replacement of a double-swing iron gate with operator: $3,200-$7,500 depending on size and style
These are real ranges for Keller work, not general internet numbers. What drives cost upward is undocumented wiring, a post that needs a new footing, or a gate so far out of alignment that the entire swing arc needs recalibration. We’ll quote the exact price before starting. We also offer a free second opinion on any written estimate you’ve received. Call (254) 330-8718 for a free estimate.
We Also Serve Cities Near Keller
If you’re in Haslet, North Richland Hills, Southlake, or Haltom City, we handle Gate Repair throughout the northeast Tarrant County area. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but our crews serve Keller locally, and we route technicians to all of these communities regularly.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Keller
Keller’s late-1990s building boom put ornamental iron driveway gates on hundreds of homes in a narrow window of construction years. Those gates, and their original LiftMaster and Elite operators, are now 15 to 25 years old, so their service life is expiring simultaneously across the city. In Shinbone Ridge and Bear Creek Estates, it’s common to see repair trucks on the same street in the same month. The other driver is Keller’s Blackland Prairie clay, which heaves posts out of plumb every drought cycle, stressing hinges and operators. If your gate is acting up, it’s probably not bad luck. It’s the age of the hardware and the ground beneath it. Call (254) 330-8718 for a free evaluation.
Yes, it very likely is. Tarrant County’s expansive clay soil shrinks dramatically during drought, and the post that holds your gate’s hinge side settles or leans. That shifts the gate downward just enough to scrape the concrete. What happens next is the real problem: the operator keeps pushing against the drag and eventually burns out its clutch or motor. We see this pattern every dry year in Keller, from Hidden Lakes to the neighborhoods off Rapp Road. The fix is re-plumbing the post and re-aligning the swing arc, not just cranking up the operator’s force setting. Get ahead of it before the motor fails. Estimates are free.
Yes, it limits your material options, but it doesn’t change how we repair. HOA deed restrictions in communities like Shinbone Ridge and Bear Creek Estates often mandate ornamental iron, so replacement gates must stay iron. That means heavier sections, more load on hinges, and a higher risk of rust at the hinge pins. We weld, re-plumb, and re-align iron gates in place, which often means we can repair rather than replace, preserving the original look your HOA approved. If a full replacement is unavoidable, we match the style and material. Call us to discuss your specific HOA requirements.
That symptom usually points to the loop detector under the driveway or the receiver board, not the keypad. The keypad sends a hard-wired signal, but the loop detector, which senses the metal mass of your vehicle, may be failing or out of adjustment. Clay soil movement can shift the loop wiring, and over time, the detector’s sensitivity drifts. We test the loop, check the receiver board, and calibrate the system so both entry methods work without false trips or missed signals. We ran a call on a 2004 estate in Hidden Lakes where a double-swing ornamental iron gate had sagged so badly the safety photocells were misaligned and the operator kept faulting out. The homeowner assumed it was a motor issue, but our tech found the hinge post had heaved on Blackland Prairie clay and cracked the anchor bolts on the Elite operator pedestal. We re-plumbed the post, set new footings, and re-aligned the swing arc before installing the replacement LiftMaster. The gate now clears its loop detector and keypad entry works without false trips. That’s the kind of root-cause fix we bring to every Keller job.
Yes. Federal safety standards (UL 325) require entrapment protection on automatic gates, and for good reason. A moving gate is a powerful piece of machinery. In Keller, where long driveways and wide arcs are common, children, pets, and even adults can be in the gate’s path. We install or repair safety photocells, edge sensors, and reverse functions on every automated gate we service. Skipping entrapment protection is not an option we will entertain. We follow the safety code on every job, including when we repair older systems that someone else installed without proper protection. If you’re unsure whether your gate meets current standards, call us. We’ll check it as part of any service call.
Your Keller Gate, Done Right and Backed in Writing
We’re not interested in being the cheapest gate company in Keller. We’re interested in being the last one you call. Every repair carries the 90-Day Done Right Promise in writing. Every technician is background-checked and uniformed. Every call is answered by a live person at (254) 330-8718, day or night. Call for a free estimate, and we’ll give you an exact price before any work begins. No pressure, no surprises. Just a square deal from a company that’s been doing this right for over 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the surrounding Tarrant County communities.