Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Keller
If your driveway gate is grinding, stalling, or refusing to move, you’re not imagining things: Keller has an unusual concentration of aging gate operators right now. Most of the ornamental iron gates in neighborhoods like Shinbone Ridge, Bear Creek Estates, and the Hidden Lakes corridor were installed as original construction features between roughly 1998 and 2010. Those operators are now failing in waves. Our Gate Motor & Opener team works in Keller every week, and we can usually have a technician at your property the same day you call. Phone us at (254) 330-8718 and you’ll reach a live person, not a voicemail tree.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Motor & Opener Company
Ironworks Gate Co. has been building and repairing gates for over 42 years, and we approach every Keller property the same way: inspect first, explain what’s actually wrong in plain English, then quote a firm price before any work starts. Victor Salinas leads our team, and the standard he sets is simple. The job gets done right or we come back and make it right. Every Keller job carries our written 90-Day Done Right Promise with no fine print and no argument.
Keller customers call us for one reason more than any other: a gate that worked fine for fifteen years suddenly does not. We understand why. The clay soil under Tarrant County never stops moving, the original LiftMaster and Elite operators from the early 2000s have reached their service limit, and a gate that is out of plumb will burn through motors faster than any repair can fix. Our technicians know Keller’s building patterns, Keller’s HOA expectations, and Keller’s clay. That saves you time and money, because we do not guess. We diagnose.
Our techs are background-checked, uniformed, and trained on nine major gate-automation brands. We dispatch from our Dallas-Fort Worth office, and our response time to Keller neighborhoods is consistently same-day for operator failures. A live person answers our phone 24 hours a day, 7 days a week. When you call about a gate stuck open on a Sunday evening, you get a person, not a recording.
Our Gate Motor & Opener Services in Keller
Motor Installation
A new operator on a Keller estate gate is rarely a straight swap. The pedestal it mounts to may be cracked from years of clay heave. The hinge post may be a half-inch out of plumb. We re-anchor, re-plumb, then set the new motor so it runs true from day one. Whether you’re replacing an original LiftMaster in Shinbone Ridge or upgrading to a new FAAC or BFT on a custom iron swing gate, installation includes full calibration of travel limits, force settings, and safety photocells. The price is settled before we turn a single bolt.
Motor Repair
Sometimes the motor is not dead. It’s wounded. Worn gears, corroded circuit boards, stripped drive sprockets, a capacitor that only fails when it’s cold. We rebuild operators when it makes financial sense and replace them when it doesn’t. Our rule is simple: if a repair will not hold for years, we tell you that upfront and recommend replacement. No scare tactics, no unnecessary upsell. Most motor repairs on Keller properties are completed in a single visit.
Linear Motor
Linear operators are common on Keller’s long driveway slide gates, especially in subdivisions where the driveway runs a hundred feet or more from the street. The Linear brand is solid equipment, but it does not tolerate a misaligned rack or a gate that drags on a heaving slab. We service Linear operator modules and full slide assemblies, and we always inspect the rail alignment and post condition while we’re there. A motor swap on a misaligned gate is a temporary fix. We make it permanent.
Slide Motor
Slide gates in Keller tend to be heavy ornamental iron, often on the larger estate lots in Bear Creek Estates and along Bourland Road. The slide motor works hard, and when the gate’s wheels or guide rollers wear, the drag load climbs and the motor strains. We replace worn rollers, correct track alignment, and install slide motors sized properly for the gate’s actual weight. Undersized motors fail early. We have seen it too many times in Keller to let it happen on our watch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We carry parts and maintain training certifications on nine major gate-automation brands, including FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Keller gate was installed with any of these, we can diagnose it and repair it correctly on the first visit. We keep common replacement parts in our service vehicles, which means fewer trips back to a supply house and a faster fix for you. When a specific part is not on the truck, we order it and return quickly.
Common Gate Motor & Opener Problems We See in Keller Homes
- Clustered operator failures in late-1990s and early-2000s subdivisions. Keller grew fast, and the original LiftMaster and Elite operators across Shinbone Ridge, Hidden Lakes, and similar neighborhoods are reaching end-of-life in the same five-year window. If three houses on your street have had gate motors replaced this year, yours is probably next. Our techs notice the pattern because we work these streets weekly.
- Clay heave pushing posts out of plumb. The Blackland Prairie clay under Keller swells when wet and contracts when dry. Over twenty years of cycles, a hinge post can move enough to bind the operator. The motor then works against resistance until something strips, burns, or cracks. Re-aligning the post is part of the job, not an extra.
- Hail damage breaking the sync between panel and operator. North Texas hail tracks heavily through the Keller-Southlake corridor. Dented and warped iron gate panels change the door’s balance point, which loads the motor unevenly and strains the mount. After a heavy spring storm, we get a wave of calls from Keller homeowners whose gates suddenly run rough.
- Water intrusion in the operator pedestal. When clay heaving cracks the post’s concrete footing, water gets into the pedestal. Gears rust, circuit boards corrode, and the motor dies from the inside. A fresh mounted operator on a cracked pedestal will fail the same way. We re-anchor and seal before we install.
Pricing for Gate Motor & Opener in Keller, TX
We quote every job before we start, and the number we give you is the number on your invoice. No surprises. For Keller homeowners, a typical motor repair runs between $185 and $425 depending on what’s actually failed. A full operator replacement typically lands between $950 and $2,600 for the unit and installation, with high-end slide or swing operators on larger estate gates at the upper end. Linear and slide motor work on Keller’s longer driveway gates usually falls between $750 and $2,200. When we install a new operator, the price includes calibration, safety photocell adjustment, and removal of the old motor. We also offer a free second opinion on any written estimate you have from another company, and a $50 discount on any repair over $250. Call (254) 330-8718 for a free estimate that is actually free. We also honor a permanent 5% senior and veteran discount and an $89 seasonal tune-up.
We Also Serve Cities Near Keller
Ironworks Gate Co. serves Keller and the surrounding communities, including Haslet, North Richland Hills, Southlake, and Haltom City. If you live on the Keller-Westlake line or just outside city limits, call us. Our Gate Motor & Opener in Keller teams are on these roads every day, and extending a run to your property is usually quick and simple.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Keller
Because the homes were built in a tight window, mostly between 1998 and 2006, and the original operators were installed at the same time. Twenty years later, they hit their service limit together. The lift is not staggered like older neighborhoods; it arrives as a wave. If your Shinbone Ridge operator is showing its age, it is on the same clock as your neighbor’s. Call (254) 330-8718 and we’ll take a look before you’re stuck with a gate that won’t open at all.
Yes. The Blackland Prairie clay expands significantly when wet and shrinks when dry. Repeated cycles of that movement push and pull on the gate post and its footing. Over fifteen or twenty years, the anchor bolts holding an operator pedestal can crack or shear. We have pulled the pedestal off on Keller jobs and found the bolts snapped off clean at the concrete line. That is why a motor swap on a Keller gate often needs post work first. Call us for an inspection, and we’ll show you what’s going on beneath the surface.
Yes. Hail dents and warping change the balance of the gate panel, and the operator has to work harder from that day forward. You may not notice it for months, until the motor burns out or a mount cracks. A quick post-storm inspection is cheaper than a full operator replacement. We can come out, check the panel alignment and balance, and tell you if any adjustment or repair is warranted.
It can. HOA deed restrictions in communities like Bear Creek Estates and Shinbone Ridge commonly require ornamental iron rather than aluminum or wood, which means the gates are heavy. The operator we install must be sized to move that mass for years, not just for the first season. We select and install motors matched to the actual weight and duty cycle of your iron gate, and we can work with your HOA’s requirements if they have specifications on the books. The motor is a mechanical decision, but it is also a HOA compliance decision in some neighborhoods. We’ll help you navigate that.
A loop detector is a wire loop buried in the driveway that senses the metal mass of a vehicle and tells the gate to open. When heavy rain saturates the clay, the loop’s signal can shift, and the detector may fail to register cars. It is a common Keller problem after spring downpours. We test loops, adjust detector sensitivity, and re-cut loops when the underground wiring has failed. If your gate does not respond after rain, it is often the loop, not the motor. Call (254) 330-8718 and we’ll trace the signal and fix it properly.
Contact Ironworks Gate Co. for Gate Motor & Opener in Keller
If your Keller gate is acting up, call us at (254) 330-8718. A live person answers, 24 hours a day, 7 days a week. We will ask what your gate is doing, give you an honest read on what’s likely wrong, and schedule a technician to come out and see it in person. Every job is quoted before work begins. Every job carries our 90-Day Done Right Promise in writing. No pressure, no surprises, just a gate that works the way it should. Call today or any day. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the DFW area with gate motor and opener expertise for over 42 years.