Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
Most gate installations in Keller run between $3,800 and $11,500 for a typical ornamental iron driveway gate, depending on the span, whether it’s a single or double swing, and the automation package. We complete most installations within five to ten business days from the free on-site measure, and we serve every Keller neighborhood from Bear Creek Park to Marshall Ridge. If your existing gate is sagging or your operator quit, call (254) 330-8718 and a live person answers, day or night. We’ve worked on Keller gates for over 42 years, and we know what the clay soil here does to a post footing.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Installation Company
Keller homeowners call us because we’re the company that shows up when we say we will, quotes a square price before any work starts, and puts a written 90-Day Done Right Promise on every job. No paperwork to file, no arguing about what was promised. If it’s not right, we come back and make it right. That’s been the Keystone Standard since 1984.
Led by Victor Salinas, our technicians are background-checked, uniformed, and trained on nine gate-automation brands including LiftMaster, DoorKing, and Elite. When we pull up to a home in Shinbone Ridge or Hidden Lakes, we’re working the way we’d work in our own mother’s driveway. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Keller locally.
Our standing offers apply on every Keller job: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. A live person answers the phone 24 hours a day, 7 days a week, not a voicemail tree.
Key Takeaways:
- Free on-site measure and written estimate, no obligation
- 90-Day Done Right Promise on every installation, in writing
- Certified on LiftMaster, DoorKing, Elite, and six other major opener brands
- Price quoted and agreed before a single bolt is turned
Our Gate Installation Services in Keller
We’ve been installing gates in Keller long enough to know that the right gate on a half-acre lot off Bourland Road is different from the right gate on a cul-de-sac in Marshall Ridge. Here’s what we handle most often, and how it plays out in Keller specifically.
Driveway Gate Installation
Keller’s housing stock is dominated by large brick homes built between 1993 and 2012 on generous setbacks with long driveways. That’s prime territory for a single swing driveway gate or a double swing on wider approaches. Our Gate Installation team measures the driveway slope, checks the post footings against Keller’s clay conditions, and builds the gate to hold plumb through drought years and wet springs alike.
Pedestrian Gate Installation
Pedestrian gates in Keller often flank the driveway gate or secure a side yard. We install ornamental iron pedestrian gates matched to your existing driveway gate’s style, with self-closing hinges and optional keypad or card reader access. If your HOA specifies a particular iron pattern, we match it.
Sliding Gate Installation
Sliding gates make sense on Keller properties where the driveway slopes or where a swing gate would block the garage apron. We install track and cantilever sliding systems sized for the gate’s weight, and we set slide gate operators from LiftMaster, DoorKing, Elite, and other brands we’re certified on. A sliding gate on Keller’s clay soil needs a proper concrete track footing, or it binds within a year.
Swing Gate Installation
Most Keller gates are ornamental iron swing gates, single on standard driveways and double on estate lots. We fabricate the frame, hang the panels, set the operator, install current UL 325 entrapment protection, and tune the whole system so it closes like the day it was hung. Swing gates are where Keller’s soil movement shows up first, so we re-plumb the posts and set the anchor bolts before the operator ever goes on.
Double Gate Installation
Double driveway gates are common across Keller’s larger estates, especially in communities like Bear Creek Estates where HOA deed restrictions mandate ornamental iron. We build both leaves to match, set dual operators with synchronized open and close, and add safety photocells on both travel paths. The closer the two leaves are matched in weight, the longer the operators last, and we weigh every panel before we hang it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We install and service gate automation from LiftMaster, DoorKing, Elite, and Mighty Mule, among others. Our techs are factory-trained on nine major opener brands, so the operator we recommend isn’t the one we happen to have on the truck, it’s the one that fits your gate’s weight, your driveway’s slope, and your existing keypad or intercom. For Keller customers, that matters, because many homes here still run original early-2000s LiftMaster and Elite operators that are well past their service life, and we keep common parts stocked for fast turnaround.
Common Gate Installation Problems We See in Keller Homes
Keller’s late-1990s and 2000s building boom installed automatic ornamental iron gates as original construction features across master-planned subdivisions. That means thousands of gate systems in this city hit their 15-to-25-year service wall all at once. Here’s what we see most often when we pull into a Keller driveway:
- Dead operator control boards. Original early-2000s LiftMaster and Elite control boards fail together city-wide, and obsolete boards rarely have local parts support. Retrofitting a new operator onto the existing iron gate is usually the smarter move than chasing parts for a 20-year-old board.
- Heaved gate posts out of plumb. Tarrant County’s Blackland Prairie clay swells and contracts with seasonal rain and drought cycles. Every dry year, posts move, operators bind, and what looked like a motor problem is actually a footing problem.
- Rusted hinge pins and sagging panels. Two decades of North Texas weather takes hinge pins first. A sagging panel overloads the operator motor, and you burn out a new motor if the sag isn’t corrected first.
- Hail-damaged iron panels. Hail tracks heavily through the Keller-Southlake corridor. Dented panels bend hinge pins and throw geometry off, so the gate binds and the operator struggles.
Pricing for Gate Installation in Keller, TX
Here’s what Keller homeowners can expect on a written estimate from us:
- Pedestrian gate installation: $1,200 - $4,500
- Single swing driveway gate with operator: $3,800 - $7,500
- Double swing driveway gate with dual operators: $6,500 - $11,500
- Sliding gate with operator and track: $5,500 - $12,000
- Operator retrofit onto existing iron gate: $1,800 - $3,600
What moves the price: gate width and weight, whether the existing posts can be re-used, whether the old operator pedestal needs re-anchoring, and which automation brand you choose. Every quote is line-itemed and agreed before we start. If a post needs re-plumbing or re-footing because of clay movement, we tell you on the estimate, not in a surprise change order. Call (254) 330-8718 and we’ll come measure free.
We Also Serve Cities Near Keller
Our crews serve Keller and the surrounding communities of Haslet, North Richland Hills, Southlake, and Haltom City. If you’re in Keller and your neighborhood is just outside city limits, call anyway. Chances are we cover it, and if we don’t, we’ll tell you straight.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Keller
In most cases, yes, we can retrofit a new operator onto your existing iron gate. The original early-2000s LiftMaster and Elite operators we see across Keller are generally mounted on pedestals or posts that can be re-used once we check the anchor bolts and re-plumb the post if clay movement has moved it. We only recommend full replacement when the gate panels themselves are rusted through, sagging beyond safe correction, or so heavy from multiple repairs that the geometry won’t hold. Call (254) 330-8718 for a free on-site assessment, and we’ll tell you which path costs less before any work is scheduled.
Keller sits on Blackland Prairie clay, which shrinks during dry spells and swells during wet seasons. That movement pushes shallow post footings out of plumb, and a post that’s off by half an inch at ground level can throw a swing gate operator badly out of alignment. On a new installation, we account for this by pouring deeper footings than the minimum, re-plumbing posts before setting operators, and anchoring pedestals to resist the seasonal heave. It’s standard practice for us on every Keller job, not an extra.
Yes. HOA deed restrictions in Shinbone Ridge, Bear Creek Estates, and other Keller communities typically specify ornamental iron construction, and often require a particular design pattern or color. We review the HOA specs with you before fabrication, match the iron pattern to what’s already on your home or what your HOA prescribes, and handle the double swing setup with synchronized operators and current safety photo-eyes. Bring us the deed restriction language and we’ll build to it.
For most Keller gates we see with sagging panels and rusted hinge pins, repair is significantly cheaper. Replacing hinge pins, correcting sag at the hinge post, and reinforcing the frame typically runs $600 to $1,800, while a full iron gate replacement runs $3,800 to $11,500. The exception is when the panels are rusted through at the bottom rail or the frame has cracked welds beyond re-welding. We’ll quote the repair and the replacement and let you decide, but we won’t push you toward a full replacement when the current gate can be made right. Call (254) 330-8718 for an estimate.
Yes, current UL 325 standards require entrapment protection on every new automatic gate installation, which means photo-eyes or contact edges on the gate’s travel path. That protection works independently of your keypad or intercom, so an older keypad entry system typically integrates fine with a new operator. We install photo-eyes that are compatible with LiftMaster, DoorKing, Elite, and the other brands we service, and we test the full system, keypad included, before we leave your driveway.
Call Ironworks Gate Co. for Gate Installation in Keller
If your Keller gate is sagging, dead, or simply twenty years old and showing it, call (254) 330-8718. You’ll get a live person, not a voicemail. We’ll schedule a free on-site measure, write you a line-itemed quote, and answer every question before you decide. The price is agreed before any work starts, and the 90-Day Done Right Promise is in writing on every job. That’s been the deal since 1984, and it’s a square one.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the Dallas-Fort Worth area for over 42 years.