Ghost Controls Gate Repair in Keller, TX

Ghost Controls Gate Repair in Keller, TX | Ironworks Gate Co.

Ghost Controls gate repair in Keller usually costs between $95 and $1,200 depending on whether we’re replacing a limit switch or a full operator, and most jobs are done in one visit. We’re an independent Ghost Controls service provider, not a manufacturer authorized dealer, which means we fix what’s actually broken instead of defaulting to a replacement quote. Here’s the thing most Keller homeowners don’t realize: your Ghost Controls operator usually isn’t failing on its own. It’s the clay under it. Call (254) 330-8718 and we’ll tell you what’s actually going on before we quote a dollar.

Call (254) 330-8718

We’ve been working on Ghost Controls AXR, DTP, TDS, and GHOST series openers across Keller’s estate neighborhoods since the early 2000s. Same brand, same models, same clay soil. If your gate is acting up, chances are we’ve seen your exact failure on a house within two miles of yours this month. Read more about our Ghost Controls sales & service work, or keep scrolling to see what we handle here in Keller.

Why Keller Residents Choose Us for Ghost Controls Service

Victor Salinas grew up in Keller and still lives a few miles from Bear Creek Park. He learned low-voltage systems and metalwork at Tarrant County College, then spent years on Gate Repair - Keller and fence jobs across DFW before coming back home with Ironworks Gate Co. That’s why when a Keller homeowner says “the gate opens halfway and reverses,” Victor usually knows before he starts the truck whether it’s a limit cam, a heaving post, or a tired gear set. Tell me what it is doing and what it is not doing – that is usually all he needs to get started.

We work on Ghost Controls equipment specifically. Not as a side item next to garage doors and pool pumps. Our techs know the difference between an AXR-1 gearbox issue and a DTP-2 sync board failure without pulling the cover. We keep genuine Ghost Controls OEM boards, sensor kits, and motor assemblies in our service van for the common failures, and we source high-quality aftermarket equivalents for out-of-production AXR and TDS parts that match torque and duty-cycle specs. Most Keller jobs get done in a single trip, with the price settled before we turn a wrench.

Common Ghost Controls Gate Repair Problems We Solve in Keller

• Obstruction errors from clay-heaved limit cams. Keller’s Blackland Prairie clay swells and shrinks with every rain and drought cycle. When a post shifts even half an inch, the magnetic limit sensor moves out of alignment and the operator throws a false obstruction code. The gate isn’t hitting anything. The sensor just thinks it is. We re-plumb the post, re-set the cam, and the error clears.
• Stripped plastic gear sprockets on AXR and DTP series. After eight to ten years of pushing against a slightly out-of-plumb gate, the plastic gears inside these operators strip. Double-gate sync setups in Keller fail faster because one side works harder than the other. A $45 gear set and a re-sync often gives you another five years.
• Corroded battery terminals on solar-compatible units. Tarrant County humidity and Keller’s temperature swings are rough on the early solar-ready Ghost Controls models. Corroded terminals and irregular voltage make the operator behave like the motor is dying, when really it’s a $30 connection issue and a good terminal cleaning.
• Control board shorts from pedestal ponding. Poor drainage around pedestal bases in Keller’s expansive clay means water sits where it shouldn’t. The control board gets wet, shorts out, and mimics motor failure. We fix the drainage, replace the board, and the operator works fine.
• Post-heave double gate sync failures. When one post heaves and the other doesn’t, the two gates lose their timing and one slams into the center stop. We re-anchor the heaving post with compacted aggregate, re-align both leaves, and re-sync the operators with a load test.

Ghost Controls Service in Keller: What Local Conditions Mean for Your Equipment

Here’s the pattern we see across Keller that a generic Ghost Controls page never diagnoses: post-heave is the root cause on the majority of operator failures we’re called out for. In neighborhoods like Shinbone Ridge and Bear Creek Estates, the original builders installed operators on posts set directly into Blackland Prairie clay without the deep aggregate base the soil actually requires. After twenty years of wet-dry cycles, those posts have drifted out of plumb anywhere from half an inch to almost two inches. The operator didn’t fail first. The post moved, the operator fought it, and something inside gave out – stripped gears, cracked limit cams, burned control boards. That’s why we always check plumb and anchor condition before we diagnose electronics. Replacing an operator on a heaving post without fixing the post just sets up the next failure. In Keller, Ghost Controls repair is a post problem first and an electronics problem second.

Ghost Controls Models & Products We Service in Keller

We service the full residential Ghost Controls lineup: the AXR-1 and AXR-2 single and double gate systems, the DTP-1 and DTP-2 series, the TDS-1 and TDS-2 towable drive systems, and the GHOST-1 and GHOST-2 newer models. When budget allows, we install genuine Ghost Controls OEM boards, motors, and sensor kits. For out-of-production AXR and TDS units, we use aftermarket equivalents matched to torque and duty-cycle specs so the operator performs like factory. We keep the most common Keller failure parts on our trucks – limit cams, gear sets, sensor blocks, and control boards – so most repairs happen the same day we show up.

Ghost Controls Service Pricing in Keller

FAQs — Ghost Controls Gate Repair in Keller

Why does my Ghost Controls gate reverse halfway through opening after a dry Keller summer? Your post has likely heaved out of plumb during the summer drought. Keller’s clay soil contracts dramatically in dry heat, pulling posts and throwing off the limit cams. The operator reads the misalignment as an obstruction and reverses. We re-set the post and re-align the sensors. Call (254) 330-8718 and describe what the gate is doing – Victor can usually narrow it down from that first call.

Can you replace just the gearbox on my Ghost Controls AXR-1 instead of a full motor swap? Yes. On AXR and DTP models, the plastic gear set inside the gearbox is a $45 part that strips long before the motor windings die. We replace gears and re-grease the gearbox for a fraction of an operator swap. Most Keller jobs like this take under two hours.

My Ghost Controls remote stopped working after the last hail storm – is the receiver damaged? Not usually. Hail rarely kills the receiver itself. The more common Keller failure is a hail-shifted gate panel twisting the alignment and triggering a safety stop that disables remote operation. Or the antenna wire cracked from hail impact. We check receiver function first, then trace the physical alignment. Call us for a diagnostic – it’s $89 and applied to whatever repair follows.

Do Ghost Controls operators have a backup battery option for Keller’s power outages? They do. Ghost Controls offers battery backup kits for the AXR and DTP lines, and we stock the battery trays and deep-cycle batteries for our Gate Installation in Keller. Given how often North Texas storms knock out power, we recommend a battery backup on every operator that also serves as your pedestrian entry. We’ll quote the kit and the install before we begin.

How do you fix a Ghost Controls double gate that’s out of sync and hitting the center post? First we check both posts for plumb. A double gate is only as synchronized as its foundations. We re-anchor any shifted post, align both leaves, then re-sync the two operators with a load test so they move as a unit. The entire repair typically runs $350 to $700 depending on post condition. Call (254) 330-8718 for a free estimate – we’ll tell you what the posts are doing before we quote anything.

Service Areas Near Keller

Ironworks Gate Co. serves the entire Keller service area and surrounding Tarrant County communities. If your home has Ghost Controls equipment in any of these areas, we’ll be there:

• Ghost Controls service in Aurora
• Ghost Controls service in Haslet
• Newark
• New Fairview
• Pecan Acres

Book Your Ghost Controls Service in Keller Today

We’ll come out, diagnose the real problem, and quote a price before any work starts. Call (254) 330-8718 for a free estimate, or ask about the $50 Off Any Repair Over $250 offer. Done right, and backed in writing.

Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller since the early 2000s.