Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Haltom City
Gate repair in Haltom City is a different job than it is a few miles south in Fort Worth’s suburban ring. The clay soil moves, the industrial gates cycle constantly, and half the homes east of Denton Highway still carry their original 1960s ironwork. We’re Gate Repair specialists who understand that a gate post leaning in 76117 is rarely just a bent post. It’s a footing problem caused by Vertisol clay swell, and it will come back if you don’t fix it at the root. If your gate is dragging, sagging, or refusing to open, call (254) 330-8718 and a live person will answer, day or night.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Repair Company
We’ve built a reputation in Haltom City by fixing what other companies patch. Most of our Haltom City customers are homeowners who have lived in the same ranch house for thirty years and are tired of calling someone back every spring when the gate starts dragging again. They call us because we re-set the post instead of shimming it. We replace the roller rather than greasing a bearing that failed three years ago. Our crews know the difference between a gate that needs adjustment and a footing that needs to be dug out and re-poured. That’s why the calls keep coming from Haltom City’s older neighborhoods, and why we get referrals from homeowners whose gates we fixed once and haven’t touched since.
Victor Salinas leads the team that serves Haltom City, and he holds every job to the same standard that’s been running this company for over 42 years. A live person answers our phone 24 hours a day. The technician who shows up is background-checked and uniformed. The price is agreed before work starts. And every repair is backed by our 90-Day Done Right Promise in writing. If it isn’t right, we come back. No paperwork, no arguing.
Our Gate Repair Services in Haltom City
Hinge & Post Repair
Haltom City’s 1950s through 1970s ranch homes were often built with ornamental iron gates hung on posts set in shallow concrete footings. The black Vertisol clay under Tarrant County expands when wet and shrinks when dry, a cycle that works posts loose over decades. We see post lean, hinge wear, and gate drag all over the 76117 ZIP code, especially in the tighter lots where a post was poured close to a foundation and never had enough bearing depth to begin with. We re-set posts in deeper footings, replace worn hinge barrels, and re-hang the gate so it swings clean instead of scraping the driveway.
Electric Gate Repair
Electric gate operators in Haltom City fail for two main reasons: high-cycle wear on commercial units near the industrial corridors, and power or sensor problems on residential openers that were installed decades ago and never maintained. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so the correct fix happens on the first visit. We carry common replacement parts on the truck, which means most Haltom City repairs are completed same-visit rather than spread across a week of follow-up trips.
Gate Realignment
A gate that drags or won’t latch is almost always a post that has moved. In Haltom City, the shrink-swell clay cycle is aggressive enough that even a gate installed correctly twenty years ago can be out of plumb today. We realign the gate to its posts, but we don’t stop there. If the post has shifted, we address the footing before re-hanging the panel. Otherwise you’ll have the same problem next wet season. This is the most common recurring repair we see in Haltom City, and the one where our approach makes the most difference.
Weld & Rust Repair
Original wrought-iron gates on Haltom City ranch homes are now beyond their fiftieth birthday, and the welds are showing it. Rust forms at the hinge joints, expands, weakens the metal, and eventually cracks the weld itself. We grind out the corrosion, weld in new material, and treat the repair so the rust doesn’t return immediately. We also repair weld failures on sliding chain-link gates, which is a regular call from the auto yards and industrial properties along Denton Highway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re trained and equipped on nine gate automation brands, which matters when a property owner calls about an opener we didn’t install. We service FAAC, BFT, Linear, and Viking systems regularly in Haltom City, along with the full range of residential and commercial operators at play in this market. The company stocks local parts for fast turnaround, so a failed circuit board or a stripped rack and pinion gear doesn’t mean two weeks of waiting for a part from a distributor. Most jobs are completed in a single visit.
Common Gate Repair Problems We See in Haltom City Homes
- Post lean from Vertisol clay movement: The expansive soils under Haltom City heave in wet weather and shrink in the baking North Texas summer. The shallow footings poured in the 1950s and 1960s crack under that stress, the post tips, and the gate begins to drag or refuse to latch. Fixing just the gate panel is a temporary fix. The post has to be re-set in a deeper footing or the problem returns.
- High-cycle roller and track failure on commercial slide gates: Along US-377 and the rail-adjacent industrial pockets, sliding chain-link gates cycle constantly at auto yards and light manufacturing facilities. The rollers wear, the track deforms, and the vibration from train and truck traffic accelerates the damage. This is a fail rate you won’t see in neighboring residential suburbs like Watauga or Richland Hills.
- Weld fatigue and rust at hinge posts on original iron gates: Older ornamental iron gates in Haltom City are on their third or fourth decade. Rust works into the joint, the weld fails, and the gate sags. Tight lot setbacks in the older neighborhoods often mean gates were installed with less clearance, so even mild sag begins scraping the driveway almost immediately.
- Opener and safety sensor failures on aging automatic gates: Gate operators installed in the 1990s and 2000s are now well past their expected service life. We see dead capacitors, failed control boards, and misaligned photocells across Haltom City. The operator may still power on but refuse to close properly, which is a safety concern as much as a convenience problem.
Pricing for Gate Repair in Haltom City, TX
A typical gate repair in Haltom City runs between $180 and $520, depending on what’s actually failed. A hinge replacement on a residential swing gate typically lands between $180 and $320. Re-setting a leaning post usually runs $350 to $650, which includes digging the old footing, pouring a deeper one, and re-hanging the gate. Electric gate opener repairs range from $220 for a basic limit switch or photocell replacement to $700 to $1,200 for a full operator replacement on a heavier gate. Weld repair work is quoted by the joint, generally $120 to $300 per repair point. We quote the exact price before any work begins. You’ll approve it first. Nothing gets added to the bill after the fact. Call (254) 330-8718 for a free estimate, and ask about our $50 off any repair over $250 and the 5% senior and veteran discount that never expires.
We Also Serve Cities Near Haltom City
Our Gate Repair in Haltom City service area covers the full 76117 ZIP code and extends to the surrounding communities. We regularly service gates in North Richland Hills, Hurst, Bedford, and Keller. The same team, the same 90-Day Done Right Promise, and the same upfront pricing apply throughout the area.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Haltom City
The Vertisol clay under Haltom City expands and contracts more dramatically than the soils in many surrounding areas, and much of the local housing stock was built in the 1950s through 1970s with shallow gate footings that were never designed for that movement. The combination means post lean is more common and more severe here than in newer Fort Worth subdivisions with deeper footings or better-drained soils. A leaning post needs to be re-set in a proper footing, usually 3 feet deep or more, or the problem will return every wet-dry cycle. Call (254) 330-8718 and we’ll assess the footing before recommending any repair.
Yes. We service heavy-duty sliding chain-link gates at commercial properties throughout the US-377/Denton Highway corridor, including auto yards, salvage lots, and light manufacturers near the Burlington Northern rail line. These gates cycle constantly and sit on the same moving clay, so roller wear, track deformation, and rack and pinion failure are common. We carry replacement rollers and track components on the truck, and most commercial gate repairs in Haltom City are completed in the same visit. Call us for a free estimate on commercial gate work.
Usually the panel isn’t bent. What we find most often on older Haltom City wrought-iron gates is that the hinge post has leaned, the hinge barrels have worn, or a weld has fatigued and cracked at the hinge point. The gate panel itself is often straight but hanging low because the supporting structure moved or failed. We re-plumb the post, replace worn hinges, weld any failed joints, and re-hang the gate for a clean swing. Call (254) 330-8718 and we’ll tell you exactly what’s wrong before quoting a price.
Yes. Automatic gate operators in Texas are required to have safety devices such as photocells or contact edges that reverse the gate if an obstruction is detected, regardless of whether the gate is residential or commercial. Older openers in Haltom City sometimes predate those requirements or have sensors that have failed. We inspect sensors on every electric gate repair and replace them when they’re not working. A gate that doesn’t reverse on contact is a serious hazard, especially with children or pets nearby. Call (254) 330-8718 for a sensor inspection.
Yes. We install solar-powered gate openers for acreage entrances east and north of Haltom City where running mains power to the gate would require trenching hundreds of feet. A solar setup with battery backup works well for heavy-duty swing and sliding gates, provided the panel is sized for the operator’s draw and the local sun exposure. We recommend solar for most rural gate applications where a direct power line isn’t practical. Call (254) 330-8718 for a free site assessment and written quote.
If your gate is leaning, dragging, grinding, or refusing to respond, call (254) 330-8718. A live person answers every time, and we’ll schedule a technician for Haltom City with a clear head and a straight price. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City and the Dallas-Fort Worth metro since 1984.