Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pecan Acres
Most gate failures in Pecan Acres don’t start at the motor. They start underground, where the black clay has shifted and taken the post with it. That’s the truth of gate work out here, and it’s why our Gate Parts & Welding crew starts every job by looking at what the gate was hung on before we touch the opener. We serve Pecan Acres with on-site welding, post replacement, hinge work, and parts repair for driveway gates, paddock gates, and everything between. Call (254) 330-8718 and you’ll get a live person, day or night, who can tell you honestly whether that sagging gate needs a weld or a new footing.
Why Ironworks Gate Co. Is Pecan Acres’s Preferred Gate Parts & Welding Company
We’ve been doing Gate Installation - Pecan Acres for over 42 years, and Pecan Acres has a particular kind of gate problem we don’t see in the closer-in suburbs. The properties out here were mostly built between the 1970s and 1990s, and a lot of the original gates were hung by the homeowner or a ranch hand, not a fence company. That means shallow posts, undersized hinges, and welds done with a farm-grade stick welder. They worked for a while. Then the clay moved.
Our technicians are background-checked and uniformed, and they work on your property the way they’d work on their own mother’s. Victor Salinas leads our crew, and he’s particular about square corners and solid footings. When we quote a job in Pecan Acres, the price is settled before any work begins. No surprises on the bill. And every job carries our written 90-Day Done Right Promise. If it isn’t right, we come back. No arguing, no paperwork.
We also know the roads out here. We’ve run calls off Peden Road, down the gravel drives east of 287, and back into the horse properties where the mailbox is the only landmark. We’ll be there when we say.
Our Gate Parts & Welding Services in Pecan Acres
Homeowners across Pecan Acres call us for the same handful of problems, season after season. Here’s what we actually do out here.
Hinge Replacement
Pecan Acres gates are heavy. A 16-foot tube-steel driveway gate can weigh over 400 pounds, and when it’s been swinging on the same weld-on hinges since the Reagan administration, the barrel wears oval and the gate starts to drag. We cut off the old hinges, grind the post clean, and burn in new weld-on barrel hinges rated for the weight of the gate. If you’ve got a decorative wrought-iron gate with cracked scrollwork near the hinge plate, that’s a welding repair, and we do it on site.
Post Replacement
This is the job we do more than any other in Pecan Acres, because of the soil. Tarrant County’s black gumbo clay swells when it rains and shrinks when it doesn’t, and a gate post set 18 inches deep with no concrete will move. The gate stops latching. The opener starts grinding. The fix isn’t a new opener, it’s a new post. We cut the old post at grade, auger a 36-inch hole, set the new post in concrete, and let it cure before we rehang the gate. Done once, done right.
Rail Repair
Rust is the enemy of the bottom rail, especially on ranch gates that sit close to the ground and catch splash-back from rain. We cut out the rotted section, weld in new tube steel, and reinforce the joints. For ornamental driveway gates, we match the profile as closely as the original fabrication allows, so the repair doesn’t shout at you every time you drive through.
Custom Welding
Sometimes the gate can’t be fixed with a part from a catalog. We fabricate custom brackets, extend gate leaves for a wider opening, weld on receiver hitches for livestock panels, and rebuild bent frames. If you have an older gate that was hand-built and nothing standard fits, our shop can make the piece that does. Victor’s been welding longer than most of the gates in Pecan Acres have been standing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pecan Acres
We’re certified on nine major automation brands for our Gate Motor & Opener in Pecan Acres, and out here we see a lot of LiftMaster on the driveway entrances and Mighty Mule or FAAC on the paddock and pasture gates. That matters because the right fix depends on knowing the brand’s quirks. A Mighty Mule arm kit needs a different post bracket than a LiftMaster ram, and if you weld the bracket in the wrong spot the operator fights the gate forever. We stock common repair parts for these brands on our trucks, so most Pecan Acres calls are handled in a single visit.
Common Gate Parts & Welding Problems We See in Pecan Acres Homes
- Posts heaving out of black clay. No concrete footing, a dry summer, and a 14-foot gate becomes a giant lever. The post leans, the gate binds at the latch, and the opener burns itself out trying to force it. We re-set the post before we sell you a new opener.
- Ice storm damage to exposed hardware. North Texas freezes do a number on gate operator internals and exposed hinge barrels, especially on rural properties with no windbreak. Water gets in, freezes, expands, and cracks the housing or seizes the gear train.
- Legacy gates without safety sensors. If your gate was hung before UL 325 requirements, it likely has no photocells or edge sensors. On any parts repair involving the operator, those gates must be brought up to modern safety standards. We can retrofit sensors on most existing gates instead of replacing the whole setup.
- Owner-built welds failing at the stress points. Farm welds hold for years until they don’t, and when they fail they usually fail at the top hinge plate or the bottom of the latch post. We re-weld with proper penetration and add gusset plates where the original builder skipped them.
Pricing for Gate Parts & Welding in Pecan Acres, TX
A hinge replacement on a standard driveway gate in Pecan Acres typically runs $180 to $340 depending on the hinge type and the gate weight. Post replacement with a 36-inch concrete footing runs $400 to $700 per post, and that includes haul-away of the old post. Custom welding and rail repair generally bill at $95 to $145 per hour plus materials, with small crack repairs often done in under an hour. A full operator retrofit with new safety sensors and re-welded brackets typically lands between $650 and $1,100. Every quote is written and agreed before we strike an arc. We also run standing offers on all Pecan Acres work: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans always get 5% off. Call (254) 330-8718 for an exact quote, free.
We Also Serve Cities Near Pecan Acres
Our crews work throughout Gate Parts & Welding in Pecan Acres and the surrounding communities, including Keller, Aurora, Haslet, and Newark. If you’re just outside the Pecan Acres line, don’t assume we won’t come. Dispatch is coordinated from our Dallas-Fort Worth office, with crews stationed to serve this side of Tarrant County. Call and ask.
Serving Pecan Acres, TX - Our Local Coverage Area
We’re based in the Pecan Acres area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pecan Acres
The gate didn’t move; the post did. Pecan Acres sits on expansive black clay that shrinks in drought and swells when it rains, and many original gate posts were set shallow with no concrete footing. A new opener pushes against a post that’s already shifting, and within a season the gate is out of square and binding. The fix is post replacement and re-plumbing before the opener work, not another opener adjustment. Call (254) 330-8718 and we’ll tell you if your posts are the problem.
In most cases we can weld the crack and re-paint the repair so it blends with the original work. If the crack runs through a load-bearing rail or the hinge plate has torn out, we’ll add a reinforcement plate behind the repair. Full panel replacement is rare. We’ll give you an honest answer after looking at it, and the estimate is free.
No, not usually. FAAC rams and control boards are replaceable, and we stock or can quickly source parts for most FAAC models still in service around Pecan Acres. If the operator is over 15 years old and the board is obsolete, we’ll tell you that too, because throwing parts at a dead platform gets expensive. The gate itself is rarely the problem. Call (254) 330-8718 for a straight answer.
For a swing gate in the black clay out here, we set posts 36 inches deep in a concrete footing, which means augering a hole about 12 inches wide and belling the bottom. That’s deeper than the original owner-built posts almost always are, and it’s the difference between a gate that holds its plumb for decades and one that heaves every August. Post depth matters more than post size.
No, that’s a Gate Access Control in Pecan Acres or opener problem, not a welding problem. Storm damage usually means water got into the keypad housing or a surge took out the control board. We diagnose it on site, and if the fix is electrical we handle it; if the storm also shifted a post, we’ll catch that while we’re there. One call covers both.
Call Ironworks Gate Co. for Gate Parts & Welding in Pecan Acres
If your gate is dragging, leaning, cracked, or just refusing to latch, don’t let it go until the opener burns out. Our Pecan Acres crew does post replacement, hinge re-welding, rail repair, and custom fabrication, and we quote every job before we start. A live person answers 24 hours a day, 7 days a week, and every job is backed by our written 90-Day Done Right Promise. Call (254) 330-8718 for a free estimate today.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Pecan Acres and the surrounding Tarrant County communities since 1984.