Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Pecan Acres
Gate motor repair and replacement in Pecan Acres usually runs between $280 and $1,900, depending on whether we’re swapping a control board or replacing an entire operator and post footing. In unincorporated Tarrant County, the problem is rarely just the motor. It’s the black gumbo clay under the post. Call (254) 330-8718 for a free estimate, and Victor Salinas or one of our techs will give you a straight answer before any work begins.
Pecan Acres is a different kind of job site than the suburbs a few miles east. Here, long gravel driveways, horse paddocks, and 1970s and 1980s ranchettes mean we see gates that were hung by the original owner with a tractor and a prayer. No footing, no post concrete, just steel driven into clay. That changes how we diagnose every opener call. If you’re off Blue Mound Road, down Peden Road, or back off Old Denton Road, we know the drive. We’ve been on these driveways.
Why Ironworks Gate Co. Is Pecan Acres’s Preferred Gate Motor & Opener Company
We’ve been doing gate work for over 42 years, and the homes here fit a pattern we know well. Older estate gates, legacy operators, and a lot of owner-built metalwork. Homeowners in Pecan Acres don’t want a gate company that’s never worked in unincorporated Tarrant County. They want someone who knows that a gate hung with no footing will fight every opener we install until the post is fixed.
Our Gate Motor & Opener team is trained and equipped across nine major brands including LiftMaster, DoorKing, and Mighty Mule. That matters when the gate is older than the kids who live behind it. We carry common control boards, limit switches, and gear kits on the truck, so most repairs in Pecan Acres are done in a single visit. And every job is covered by our written 90-Day Done Right Promise. If it’s not right, we come back. No arguing, no paperwork.
When you call Ironworks Gate Co., a live person answers. Not a voicemail, not an answering service. That’s true at 2 p.m. and it’s true at 2 a.m. when an ice storm just toppled a gate off its slide. Victor Salinas leads the crews, and the techs who come to your property are background-checked and uniformed. They’ll treat your gate like it’s on their own mother’s driveway.
Our Gate Motor & Opener Services in Pecan Acres
Motor Repair
Most opener failures in Pecan Acres start below ground level. The motor may be fine, but a post heaved out of plumb by expansive clay puts the arm out of alignment, the gate binds, and the opener strains until a gear strips or a board burns. We diagnose the full chain from post to motor. We don’t just bolt on a new operator and hope. We check the post, the hinges, the chain or arm, and the limits. If the post moved, we’ll tell you before we touch the motor.
Motor Installation
A new gate opener in Pecan Acres should be chosen for the gate’s weight, the driveway’s slope, and the soil under the post. That last one is the one most installers skip. We pre-drill and set posts in concrete below the frost line and below the shrink-swell zone of the local clay when we need to. A swing gate opener for a 16-foot tube-steel estate gate needs a different operator than a light decorative walk gate. We’ll spec it correctly and quote it in writing before we start.
Linear Motor
Linear arm motors work well on long, heavy driveway gates like the ones common around Pecan Acres, where gates span 14 to 20 feet and run on wheeled or V-track systems. The weak point here is the local clay. If the track settles or the gate drags, a linear motor will eat its own internals fast. We inspect track level and wheel wear before we install a linear operator, and if your existing one has failed, we’ll tell you whether the motor is the problem or the track under it is.
Slide Motor
Slide gates are less common than swing gates in Pecan Acres, but they show up on newer ranchettes and along county roads where a driveway is too steep for a swing. Tarrant County ice storms are hard on exposed rack-and-pinion slides. Plastic gear housings crack, chains seize, and openers without battery backup leave the gate stuck half-open. We service and replace slide operators from Viking, BFT, and Linear, and we recommend battery backup on every slide gate that can’t be manually opened quickly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pecan Acres
We service all nine major gate-automation brands, and for Pecan Acres specifically that means a lot of older LiftMaster, DoorKing, and Mighty Mule units still running after 20 or 30 years. We keep common parts for those legacy systems on our trucks when we head out your way. If your board is obsolete and can’t be rebuilt, we’ll tell you that on the first visit and show you what a retrofit costs against what a new operator costs. No mystery, no second trip just to quote.
Common Gate Motor & Opener Problems We See in Pecan Acres Homes
- Posts heaving in black gumbo clay. Expansive clay shrinks in summer drought and swells after rain. Posts set without concrete footings twist and tilt, binding the gate and stripping opener gears. A dry July and August in Pecan Acres will expose every post that was never set right.
- Legacy control boards failing after power surges. 1980s and 1990s operators were built before modern surge protection. Rural power on co-op lines isn’t always clean. We see boards that fried after a lightning strike or a rolling brownout, and for many old models, retrofit kits simply don’t exist.
- Ice storm damage to exposed hardware. A North Texas ice storm coats rack-and-pinion slides, chains, and limit switches. When the thaw comes, plastic gears crack and openers without battery backup leave gates frozen in place. If your gate faces north on an open pasture, that exposure is worse.
- Obsolete safety edges and photocells. Gates hung before modern safety requirements often lack photo eyes or have failed safety edges. We can retrofit most swing and slide gates with current UL 325-compliant safety devices. On some 1980s-era operators, the control input doesn’t support modern photocells, which means a board or full operator swap.
Pricing for Gate Motor & Opener in Pecan Acres, TX
Here are real numbers for Pecan Acres, not national averages. A control board replacement on a common operator runs $280 to $550 including the part and labor. A full motor replacement runs $600 to $1,100. A complete new swing gate operator, installed with a properly set concrete post, runs $1,400 to $2,400 depending on gate weight and the condition of the existing post. Adding battery backup runs $300 to $600. Re-setting a heaved post adds $400 to $900 because of the concrete work and re-hanging. Every job is quoted in writing before a single bolt is turned. Call (254) 330-8718 for a free estimate, and ask about our $50 off any repair over $250.
We Also Serve Cities Near Pecan Acres
While this page is built for Gate Motor & Opener in Pecan Acres, our crews also run regular routes to Keller, Aurora, Haslet, and Newark. Same crew, same written guarantee, same live person on the phone.
Serving Pecan Acres, TX - Our Local Coverage Area
We’re based in the Pecan Acres area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Pecan Acres
The black gumbo clay under your gate shrinks during a dry Texas summer, and any post set without a deep concrete footing shifts or tilts. That puts your opener’s arm out of alignment and the gate binds or drags. The fix is re-setting the post below the shrink-swell zone, not adjusting the opener limits. Call (254) 330-8718 and we’ll check the post before we waste your money on a new motor.
Sometimes yes, sometimes no. Many 1980s and early 1990s control boards don’t have the input for modern UL 325 photo eyes. If your board supports it, we can add photocells and a new safety edge for roughly $300 to $700. If it doesn’t, we’ll show you the cost of a board swap or full operator replacement. We won’t sell you parts that won’t work with your existing board.
Usually not. More often the gear housing cracked, the limit switch snapped, or the control board shorted when the gate froze in place and the motor kept pulling current. We’ll test the motor itself before recommending anything. Call (254) 330-8718 and we’ll give you an honest diagnosis. If the motor is fine, we’ll fix what actually broke.
No. A stand-alone keypad and intercom work on local wiring or a wireless link between the gate and the house. Cellular gate controllers are available for properties where running wire isn’t practical across a long driveway. Internet and landline service in parts of Pecan Acres can be spotty, so we typically spec a system that works without either one.
Every 12 months, and more often if the gate is exposed to open pasture and county road dust. We offer an $89 seasonal tune-up that covers track cleaning, limit calibration, gear inspection, and safety edge testing. A slide gate carrying horse traffic and Texas weather needs more regular attention than a suburban swing gate. Call (254) 330-8718 to schedule one.
Call Ironworks Gate Co. for Gate Motor & Opener in Pecan Acres
If your gate is binding, dead, or just slow, call (254) 330-8718. You’ll get a live person, a straight answer, and a written quote before any work starts. Victor Salinas and the Ironworks crew work on driveway gates and estate gates all over Pecan Acres, from the ranchettes off Blue Mound Road to the horse properties off Peden Road. Done right, backed in writing, and no surprises on the bill.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Pecan Acres and northwest Tarrant County.