Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Aurora
Gate repair in Aurora usually comes down to two things: wind and clay. The heavy pipe and tube-steel gates that protect acreage properties across Wise County take a beating from sustained North Texas winds, and the black waxy soil underneath them swells and shrinks with every rain-drought cycle. When a hinge post heaves or a weld snaps, you need someone who understands both. Ironworks Gate Co. has been repairing gates on ranch properties and rural homesteads around Aurora for years, and we quote every job before we turn a single bolt. Call (254) 330-8718 and a live person answers, day or night.
Key takeaways for Aurora homeowners:
- Most gate failures here trace back to post footings and wind load, not the gate panel itself.
- We inspect the post and footing before touching hardware because the clay will undo a quick fix within a season.
- Electric gate repair in Aurora often follows storm power cuts, so we check battery backups and manual releases on every call.
- Every job is protected by our written 90-Day Done Right Promise, and the price is agreed before work begins.
Why Ironworks Gate Co. Is Aurora’s Preferred Gate Repair Company
We’re not a general handyman service that happens to hang gates. Ironworks Gate Co. has specialized in driveway and estate gates for over 42 years, founded in 1984, and that focus shows on every Aurora call. Victor Salinas, who leads our company, built the team around a simple standard: the Keystone Standard. Every job, from a sagging cattle gate off County Road 4785 to Gate Access Control in Aurora setups, gets the same written guarantee. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Our technicians are background-checked and uniformed, and they arrive trained on nine major gate-automation brands. That matters in Aurora because the opener on a ranch entry is often a different brand than what suburban crews see daily. Our Gate Repair team carries parts for LiftMaster, FAAC, Mighty Mule, and others, so most jobs are finished in a single visit.
Response time to Aurora is something we take seriously. When a storm passes through and a gate is down on a caliche drive with livestock behind it, waiting until Monday is not an option. Our dispatch is coordinated from our Dallas-Fort Worth office, and crews serve Aurora locally. A live person answers the phone 24 hours a day, 7 days a week. You will not get a voicemail tree when you call (254) 330-8718.
Our Gate Repair Services in Aurora
The gates we see around Aurora are different from what you would find 30 miles east in Fort Worth. They are wide, heavy-duty single or double-swing gates on wooden or steel posts, often set in open, wind-exposed ground with no wall or pillar to brace them. That shapes every repair we do.
Hinge & Post Repair
Wind load on a solid infill gate is relentless in Wise County. The sustained winds fatigue weld joints where hinges meet the post, and eventually something gives. When we repair a hinge in Aurora, we always check what the post is set in. The black waxy clay here swells after rain and shrinks in drought, and a post that shifts even two inches transfers that movement straight into the hinge. We set posts deeper, with concrete carried below the clay’s active zone, so the repair holds through the next wet winter.
Gate Realignment
A gate that drags on the caliche or will not latch is almost always a post issue in Aurora, not a gate panel issue. The expansive clay under much of Wise County heaves posts out of plumb, and the gate follows. Our crew checks post depth and footing condition before adjusting the gate itself. Skipping that step means the same Aurora gate is back out of square within a season, and you are paying twice for one repair.
Electric Gate Repair
Storm season in Aurora brings power cuts, and power cuts expose weak points in Aurora Gate Motor & Opener systems. We regularly see opener boards burned out by surges, battery backups that have not been charged in years, and photocells knocked out of alignment by wind. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whatever is on your driveway, we know the wiring and we know the fix. We also walk every customer through the safe manual-release procedure so a dead opener does not strand trucks, trailers, or livestock behind a locked gate.
Lock Repair
Most Aurora gates use heavy-duty slide bolts, chain locks, or padlock hasps rather than the keyed locksets common in suburban gates. Wind vibration works bolts loose and wears hasps, and clay movement can throw a lock out of alignment so the shackle will not seat. We repair or replace lock hardware and align it so the gate actually latches when the wind is blowing, which is most days out here.
Weld & Rust Repair
Open plains, no windbreak, and decades of weather mean rust is part of life for a steel gate in Aurora. We grind out rust, handle Aurora Gate Parts & Welding repairs, and reinforce stress points where the gate frame meets the hinge stile. A proper weld repair on a 16-foot pipe gate is not a patch job, it is structural work, and that is the kind of work our welding crew does every week.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aurora
Our techs are certified on nine gate-automation brands, and that includes the ones we see most often on Aurora ranches and rural properties: LiftMaster, FAAC, and Mighty Mule. Whether your opener is a solar unit on a pasture gate or a heavy-duty FAAC on a 20-foot steel swing gate, we carry or can quickly source the right parts. Because we are not a one-brand shop, we diagnose the opener you actually have and fix it correctly on the first visit. Our Gate Repair team stocks common controllers, photocells, and battery backups, which means faster turnaround for Aurora customers without waiting on a parts shipment from out of state.
Common Gate Repair Problems We See in Aurora Homes
- Posts leaning after wet winters. The black waxy clay under Aurora swells when it rains and shrinks when it dries. A post set shallow will lean within a season, and the gate will drag or fail to latch.
- Hinge welds cracked by wind load. A 16-foot solid infill gate acts like a sail in a Wise County windstorm. The repeated loading flexes the weld at the hinge post until it cracks.
- Gate openers dead after storms. Power surges fry control boards, and a dead battery backup means no manual release has been tested in years. After a bad storm, these calls spike across Aurora.
- Photocells misaligned by wind. Safety sensors on automatic gates get knocked out of alignment by wind-driven debris and vibration. The gate then refuses to close or reverses halfway.
Pricing for Gate Repair in Aurora, TX
| Service | Typical Aurora Price Range |
|---|---|
| Hinge repair or replacement (single gate) | $175 - $400 |
| Post re-setting and concrete footing | $350 - $750 per post |
| Gate realignment | $150 - $325 |
| Electric opener diagnosis and repair | $180 - $520 |
| Weld repair, per joint | $95 - $225 |
| Lock replacement and alignment | $90 - $210 |
These are honest ranges for Aurora’s market, where gates tend to be larger and heavier than suburban models. The price is quoted and agreed before any work starts. Senior and veteran customers always receive a 5% discount, any repair over $250 qualifies for $50 off, and we offer a free second opinion on any written estimate you have from another company. Call (254) 330-8718 for a free estimate on gate repair in Aurora.
The Aurora Wind and Clay Problem
Here is what makes gate repair in Aurora different from everywhere else we work. The combination of open North Texas plains and black waxy expansive clay means two forces are always working against your gate: wind pushing on the panel and soil moving under the posts. A gate that was perfectly square when it was hung can be dragging on the caliche six months later, not because anything bent, but because the ground itself shifted. That is why we assess post depth and footing condition on nearly every call. A hinge weld or a latch adjustment is temporary if the post is moving. Our crew got a call after a line of severe storms rolled through Aurora off County Road 4785; the wind load on a 16-foot solid infill swing gate had cracked the hinge post at the weld and dropped the panel onto the caliche drive. We re-set the post in a deeper footing with concrete to below the clay’s active zone, realigned the hinge post, and surged the gate opener’s battery backup after the power cut, then walked the owner through the safe manual-release procedure so they could open it by hand during the next outage.
That is the Aurora playbook: fix the footing first, then the gate, then the opener. In that order.
We Also Serve Cities Near Aurora
While this page covers Gate Repair in Aurora specifically, our crews also serve Keller, Haslet, Newark, and New Fairview. If you live in a neighboring community and your gate is down, call (254) 330-8718 and we will get you on the schedule.
Serving Aurora, TX - Our Local Coverage Area
We’re based in the Aurora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Aurora
The black waxy clay under much of Wise County swells when it absorbs water and shrinks when it dries out. A post set shallow or without proper concrete below the active soil zone will heave and lean every year. The permanent fix is re-setting the post deeper, with footing carried below the clay’s movement layer. That runs $350 to $750 per post in Aurora. We quote it before we dig, and the 90-Day Done Right Promise covers the repair. Call (254) 330-8718 for an assessment.
Every electric gate opener has a manual release, usually a keyed or handled mechanism on the operator itself. Disengage it and the gate swings freely by hand. If your opener has a battery backup, it may still operate normally for a limited number of cycles. We test the manual release and the battery backup on every Aurora service call, because storms knock out power here regularly. If you are unsure where your release is, call (254) 330-8718 and we will walk you through it.
In Aurora, sag is almost always a post problem. The clay heaves the post out of plumb, and the gate panel, still straight, tilts along with it. We check plumb with a level on the post, not the gate, because that tells us whether the fix is a footing job or a hinge adjustment. A hinge adjustment on a moving post is money wasted. Post repair in Aurora typically runs $350 to $750 per post, including the new concrete footing. Estimates are free.
Block the beam with your hand while the gate is closing. The gate should stop and reverse. If it keeps closing, the photocells are either misaligned, dirty, or dead. Wind and storm debris knock them out of alignment frequently in Aurora, especially on open ranch entries with no windbreak. We realign and test them on every electric gate repair call. If yours are not working, call (254) 330-8718 before the next storm, not after.
Yes. The usual culprits are a failing battery that no longer holds a charge, a solar panel that is undersized for the opener, or a charge controller that has failed. On Aurora properties with open exposure, the panel itself may be fine and the problem is simply an old battery. We test the panel output and the battery condition, then replace what is actually bad. Most solar opener repairs in Aurora run $180 to $480. Call (254) 330-8718 and we will diagnose it on site.
Call Ironworks Gate Co. for Gate Repair in Aurora
If your gate is down, leaning, or refusing to open, call (254) 330-8718. A live person answers, 24 hours a day, 7 days a week. We will quote your gate repair in Aurora before any work starts, and every job is backed by the written 90-Day Done Right Promise. Free estimates, $50 off any repair over $250, and a permanent 5% senior and veteran discount. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Aurora and the surrounding Wise County communities.