Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in North Richland Hills, TX
When a driveway gate stops closing in North Richland Hills, it’s usually one of three things: a post that’s shifted out of plumb from the clay soil, a hinge that’s finally given up, or an opener that’s lost its limits. Ironworks Gate Co. handles all three, and we do it in one visit about nine times out of ten. Call (254) 330-8718 and you’ll get a live person on the line, not a voicemail. We’ll send a uniformed, background-checked technician to your driveway with the parts and tools already on the truck, and we’ll quote the price before a single bolt is turned.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why North Richland Hills Homeowners Choose Ironworks Gate Co.
Over in the 76180 neighborhoods south of Loop 820, the gates we see most often are the original cedar swing gates from the 1980s subdivisions over near Smithfield Road and Rufe Snow Drive. Those gates have spent thirty to forty years sitting in Blackland Prairie clay, and the soil has done what it always does: it moves. Posts lean. Latches bind. The gate drags a half-inch groove into the driveway every time the wind catches it. Homeowners on the newer side of town, up in the 76182 ZIP near the Keller line, call us for different reasons: HOA-regulated ornamental iron and aluminum gates with automation that’s lost its programming or a gear that’s stripped. In both corners of North Richland Hills, the call comes to the same place. We’re the dedicated gate specialist, not a handyman who also does fences and roofs. Victor Salinas runs our crews, and the standard on every job is simple: done right, and backed in writing.
Our reputation in North Richland Hills rests on the jobs we finish without fanfare and the calls we take at midnight when a gate refuses to open and a car is trapped in the driveway. A live person answers, every time. The technician who rings your doorbell is background-checked and uniformed, working by the K.E.Y.S. code our company has used for over 42 years: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
Gate Repair Services We Offer in North Richland Hills
Gate Repair
A sagging gate, a latch that won’t catch, a post that’s heaved two inches out of level: these are everyday calls for us in North Richland Hills, and most are finished the same day. We repair welding cracks, replace bent hinges, re-plumb posts, and get the gate swinging true again. If the damage turns out to be more than a repair, we’ll tell you straight and give you a written price either way.
Learn more about our Gate Repair in North Richland Hills.
Gate Installation
New gates in North Richland Hills need footings sized for the shrink-swell clay that runs under this part of Tarrant County. We measure, dig, set posts below the active soil zone, and hang the gate so it won’t fight the ground for the next thirty years. We’ll price the full job up front, and the written quote is what you pay.
Learn more about our Gate Installation in North Richland Hills.
Gate Motor & Opener
When an opener quits, the problem is usually the board, the limits, the gear, or the power supply. We’re trained and equipped on nine automation brands, including LiftMaster, FAAC, and Mighty Mule, so the right fix happens on the first trip rather than the third. If a motor can’t be saved, we’ll show you the failed part and quote the replacement before any work begins.
Learn more about our Gate Motor & Opener in North Richland Hills.
Gate Access Control
Keypads, intercoms, vehicle sensors, and card readers: we install and service the systems that let the right people in and keep everyone else out. We’ll match your existing components where possible and keep the wiring tidy. Every access control job is quoted in advance, and the 90-Day Done Right Promise covers it in writing.
Gate Parts & Welding
Some repairs only need a hinge, a roller, or a section of frame welded back together. We carry common parts on the truck and can fabricate what isn’t common. For homeowners with ornamental iron gates, our welding work is ground smooth and painted to match, so the repair doesn’t look like a patch job.
Neighborhoods We Serve in North Richland Hills
We run calls across the whole city, from the established subdivisions off Rufe Snow Drive and Smithfield Road to the newer neighborhoods climbing toward the Keller line. A few of the areas we’re in regularly:
- Smithfield
- Home Town North
- Fossil Creek
- Walker’s Creek
- Along Davis Boulevard and Mid-Cities Boulevard
Most repair calls in North Richland Hills get a same-visit fix. When a part has to be ordered, we tell you the lead time before we leave your driveway.
Why North Richland Hills’s Climate & Housing Affect Gate Repair
North Richland Hills sits squarely on the shrink-swell clay belt of northeast Tarrant County, and that single fact shapes more gate work here than any hardware failure. Through a dry summer with weeks above 100°F, the Blackland Prairie clay shrinks hard enough to drag a gate post two or three inches out of plumb. Then the fall rains come and the ground swells back. The gate that hung true in April will be dragging by September, and the post that was level last year will be leaning this year. We see it constantly in the 76180 ZIP: swing gates that scrape the driveway on the outer edge, latch strikes that no longer line up, and slide gates whose tracks have walked off alignment over twelve months of seasonal movement.
The housing stock makes it worse. The 1970s through 1990s ranch homes south of Loop 820 were largely built with cedar privacy-fence gates, many of them original to the house. Thirty to fifty years of clay-soil contact rots the post below grade even as the gate above still looks serviceable. Our North Richland Hills trucks carry post anchors, hydraulic cement, and a post-plumb kit as standard inventory, because the underlying soil problem is part of the repair here far more often than in neighboring cities on sandier ground. When we re-set a post in this city, we set it for the ground it sits in, not for the ground a catalog photo assumed.
Pricing for Gate Repair in North Richland Hills
Honest numbers, the same as we’d give you over the phone. Every price is quoted and agreed before any work starts, so the invoice matches the estimate.
- Service call and diagnosis: $49-$89, credited toward the repair if you approve the work
- Hinge replacement (per hinge): $85-$180
- Re-plumbing a gate post: $220-$450 depending on post size and footing condition
- Opener repair (boards, gears, limits, sensors): $160-$480
- Full opener replacement: $850-$2,400 depending on brand and gate weight
- Welding repair (cracked frame, broken picket): $95-$350
We also offer $50 off any repair over $250 and a free second opinion on any written estimate you’ve received from another company. Estimates are free. Call (254) 330-8718 and we’ll give you a straight number.
Service Area - Cities Near North Richland Hills
Ironworks Gate Co. is based in the Dallas-Fort Worth metro, and our crews serve North Richland Hills locally. We also work regularly in Hurst, Colleyville, Bedford, and Haltom City. If you’re just outside the NRH city limits, call us and we’ll point you in the right direction.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Richland Hills
Most North Richland Hills gate repairs run between $85 and $480, with the most common jobs being hinge replacement, post re-plumbing, and opener board or limit repairs. A full opener replacement typically falls between $850 and $2,400 depending on the gate’s weight and the brand on the driveway. Every job is quoted before work starts, so the price you approve is the price on the invoice. Call (254) 330-8718 for an exact quote, free.
Most gate repairs in North Richland Hills are completed in a single visit, and many are done the same day you call. If a specific part has to be ordered, we’ll tell you the lead time honestly before we leave. For emergencies where a gate won’t open and a car is trapped, a live person answers the phone 24 hours a day, seven days a week.
Because the Blackland Prairie clay under North Richland Hills shrinks during the hot, dry months and pulls the gate post out of plumb, sometimes by two or three inches in a single summer. The gate that hung fine in April will be dragging by September, then the fall rains swell the soil and shift it the other way. Re-plumbing the post and setting it deeper is almost always part of the repair in this city. Call (254) 330-8718 and we’ll come level it.
Yes. Ironworks Gate Co. is trained and equipped on nine automation brands, including LiftMaster, Mighty Mule, Elite, and FAAC, so the right diagnostic happens on the first visit. We’ll test the failed component, show you what’s wrong, and quote the fix before any work starts. Most opener repairs are done in one trip.
A full installation in North Richland Hills includes a site assessment, footings sized for the clay soil, post setting below the active shrink-swell zone, gate hanging and alignment, and any automation or access control you approve. The written price covers the whole job, and the work comes with our 90-Day Done Right Promise. Call (254) 330-8718 for a free measure and a written quote.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills as part of our Dallas-Fort Worth service area.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Richland Hills Customers Say
"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson