Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hurst
A new driveway or backyard gate in Hurst typically runs $1,800-$6,500 installed, depending on gate width, material, and whether you’re adding automation. Most swing gate and pedestrian gate installations in Hurst take one full day on site, with concrete footings given time to cure before the gate is hung. When you call Ironworks Gate Co. at (254) 330-8718, a live person answers, we schedule a free on-site measure, and you get a written price before any work starts. We dispatch crews to Hurst’s 76053 and 76054 zip codes throughout the week.
We know Hurst gates better than most because we see the same failure patterns repeating across this city’s neighborhoods every season. That local knowledge shapes how we set posts, size hinges, and mount operators so a new gate stays square and working through Hurst’s wet springs and dry summers.
Why Ironworks Gate Co. Is Hurst’s Preferred Gate Installation Company
Ironworks Gate Co. has been setting gates and running automation for over 42 years, founded in 1984 and still answering the phone with a person, not a menu. In Hurst, we service the neighborhoods built out in the 1950s through 1970s, the brick ranch homes with wood privacy fence gates along the back property line, and the newer steel driveway gates going in on corner lots and wider driveways. Many Hurst homeowners call us after a generalist handyman has already been out once or twice. They want the job done once, with a guarantee in writing.
Every job we complete in Hurst is covered by our 90-Day Done Right Promise. It’s written, it’s simple, and if something isn’t right, we come back and make it right. No paperwork, no arguing. Our technicians are background-checked and uniformed, and they work the way they would at their own mother’s house. The 400th job gets the same care as the first.
Our Gate Installation team reaches most Hurst neighborhoods the same day for estimates, and installation is scheduled at your convenience, never rushed. If you’re comparing quotes, bring us the written estimate from any other company and we’ll give you a free second opinion, whether or not you hire us.
Our Gate Installation Services in Hurst
Swing Gate Installation
Most Hurst driveways are built for swing gates, and we install both single leaf and double leaf configurations. Solid infill swing gates catch a lot of North Texas wind, so we size hinge posts and footings accordingly, not just to hold the gate, but to hold it square through a spring storm season.
Double Gate Installation
A double swing gate in Hurst gives you a wider opening without the track a sliding gate needs. The critical piece here is the center alignment and the post anchoring on both sides. In Hurst’s clay soil, we’ve seen double gates nearly pull their hinge posts inward after just two wet seasons. We key footings below the active clay depth so that doesn’t happen.
Driveway Gate Installation
Driveway gates in Hurst run the full range, from simple wood privacy gates to steel estate gates with automation. Before we quote a driveway gate, we check the driveway slope, the drainage path along the property line, and where the gate will swing in relation to the house and the street. These three things dictate post sizing, hinge choice, and operator selection far more than style does.
Pedestrian Gate Installation
Pedestrian gates in Hurst backyards are usually the most repaired and most replaced gate on the property. They’re used daily, they hang from a single hinge post, and they sit on the same swelling clay as everything else. We build them to open and close without dragging, even when the ground has shifted.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
What Hurst’s Soil and Weather Do to Gate Posts
Hurst sits on North Texas’s expansive black clay, what soil engineers call Vertisol. That clay swells dramatically when it rains and shrinks enough during summer drought to open visible cracks in the ground. For a gate post set in concrete, that movement is relentless. The post gets torqued, the concrete footing shifts, and the gate slowly falls out of plumb. This isn’t bad luck or a bad install. It’s the ground itself moving under the gate.
In Hurst’s 76053 zip, there’s a specific pattern we see again and again. The gate post on the low side of the yard, the side that drains toward the alley or the swale, heaves and tilts toward that drainage path. The clay under that downhill post stays wet longer after a rain because water collects there. That side swells more than the uphill side, so one post rises and leans while the other stays put. A gate that was perfectly square when we hung it in March will be binding against the driveway by June or binding at the latch by the following spring. This is the most common reason a “new” gate in Hurst starts sticking within one or two wet seasons.
We reset a twisted double swing gate off Bedford Euless Road in Hurst after the original 1970s hinge post heaved toward the alley drainage swale, pulling the DoorKing operator out of alignment. Our crew poured new post footings keyed below the active clay depth, then mounted a set of adjustable hinge posts so the next shrink-swell cycle can be corrected without a full tear-out. That’s the difference between a gate that works for a season and one that works for thirty years.
Ice, Wind, and the Gate That Has to Survive Them
North Texas ice storms are the acute threat to Hurst gates. Freezing rain coats a wood gate panel in a layer of ice that adds real weight, enough to bend a frame or strip the screws out of an original hinge post. The same ice locks up latches and seizes automatic operator arms. When a gate freezes shut, forcing it open is how frames get bent and hinge screws get pulled. If your gate is iced over, clear the latch area gently and let the ice melt before running the operator. Running a frozen operator against a bound gate is a fast way to burn out a motor or strip a gear.
Summer brings the opposite problem. When Hurst hits 100°F for weeks at a time, the clay shrinks away from post footings, leaving hinge posts loose and a previously plumb gate sagging, dragging on the ground latch by August. Wood gates check and split in the dry heat, and steel gate frames expand enough to change how the gate sits on its hinges. We account for all of this when we size posts, choose hinge hardware, and set operator force limits.
Trusted Brands We Service in Hurst
Our Hurst crews are trained and equipped across nine gate-automation brands, including DoorKing, LiftMaster, FAAC, Elite, and Mighty Mule. That matters when an operator fails and you want it fixed on the first visit rather than diagnosed, then ordered, then rescheduled. We keep common parts for these brands in our service vans when we’re working in Hurst, so most gate installation and automation jobs finish in a single visit. If you have an existing operator, we can build the new gate around it or upgrade it while we’re there.
Common Gate Installation Problems We See in Hurst Homes
- Post heave on the low drainage side. The clay under the downhill post stays wet longer, swells more, and tilts that post within one or two wet seasons. We fix this by keying the footing below the active clay depth and using adjustable hinge posts.
- Wind racking on solid infill gates. A solid wood or steel gate acts like a sail in a Hurst thunderstorm, twisting the frame and pulling hinge screws from original 1970s posts. We size the frame and the hardware for wind load, not just for weight.
- Ice damage to frames and operators. Freezing rain adds enough weight to bend a wood frame and enough resistance to strip operator gears when a homeowner runs the opener on a frozen gate. We build with ice events in mind and set safe operator parameters.
- Original posts still in place after nearly everything else has been replaced. Many Hurst gates are on their second or third wood panel but still hang from the original concrete-set posts. The panel isn’t the weak point. The footing under the post is.
Pricing for Gate Installation in Hurst, TX
A pedestrian gate installation in Hurst typically runs $850-$1,600, and a single swing driveway gate runs $1,800-$3,800 before automation. A double swing gate or a sliding driveway gate runs $3,200-$6,500, and adding an automatic opener typically adds $900-$1,800 to whatever gate style you choose. The biggest variables in Hurst are post footing repair work, which is common given the clay movement, and whether existing posts can be reused or need to be replaced. Every estimate includes a written, itemized price, agreed before any work begins, so the number we quote is the number you pay. Estimates are free.
We Also Serve Cities Near Hurst
Our Gate Installation in Hurst crews regularly work in Bedford, North Richland Hills, Colleyville, and Haltom City as well. If you’re just across the Hurst city line, call us at (254) 330-8718 and we’ll let you know how soon we can be there. Most of the Mid-Cities is within a short drive for our scheduling team.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Hurst
Most automatic gate operators have a manual release, usually a pull handle or keyed release on the operator arm or gearbox. Pull it to disengage the motor, then push the gate open by hand only if it moves freely. If the gate is frozen to the ground or the latch, don’t force it. Wait for the ice to melt or chip it away from the latch first. Forcing a frozen gate bends frames and strips gears.
Hurst sits on expansive Vertisol clay that swells when wet. The post on the low side of the yard sits in soil that stays wet longer after rain, so that side swells more and lifts the post while the uphill side stays stable. This differential heave tilts the post toward the drainage path within one or two wet seasons unless the footing was keyed below the active clay depth.
During drought the clay shrinks away from the post footings, so a hinge post can loosen and let the gate sag. That sag makes the gate drag or bind, which trips the operator’s force sensor and reverses it. Check whether the gate still swings level and whether the hinge post wiggles. If it does, the fix is resetting the post, not replacing the operator.
Most Hurst gates hang from original posts set in the 1960s or 1970s. The wood panel has been replaced two or three times, but the concrete footing under the hinge post is original and has been worked by decades of clay swell and shrink. The post is loose underground, so the gate sags regardless of how new the panel is.
Yes. Automatic gate operators in residential Hurst installations must have a monitored entrapment protection device, either photo-eyes or a safety edge, plus a manual release accessible from outside the gate. This is standard for UL 325 compliance and applies to new installs and operator replacements. We install both and test them before we leave.
Call Ironworks Gate Co. for Gate Installation in Hurst
If your gate is leaning toward the drainage swale or the ice has finally finished off the hinges, call us at (254) 330-8718. We’ll come out, measure, look at your posts and your drainage, and give you a written price. A square deal, upfront, no surprises on the bill. And if it isn’t right after we leave, the 90-Day Done Right Promise means we come back and make it right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst since 1984.