Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Gate Repair Services in Trophy Club, TX
If your driveway gate is sagging, grinding, or refusing to open in Trophy Club, you’re likely dealing with one of two culprits: the heavy clay soil shifting your posts, or an operator that has quietly reached the end of its working life. Most gate repairs in Trophy Club run between $180 and $650 depending on whether it’s a hinge adjustment, a weld repair, or a full operator replacement. We dispatch crews to Trophy Club daily and answer the phone around the clock at (254) 330-8718. You’ll speak with a person, not an answering service.
We’re Ironworks Gate Co., and we’ve spent 42 years earning our keep in North Texas driveways. Victor Salinas leads our team, and every technician who rolls into Trophy Club carries the same standard: background-checked, uniformed, and trained on the automation brands actually installed in this community. You call. We come. The gate works. It’s that straightforward.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Trophy Club Homeowners Choose Ironworks Gate Co.
Trophy Club isn’t like the surrounding suburbs. This is a master-planned golf-course community where automated entry gates aren’t an upgrade, they’re the baseline. Nearly every estate lot on streets like Trophy Club Drive or Indian Creek has some form of automated entry, and the homes in neighborhoods such as The Highlands and Hogan’s Glen were built in a window where Viking, Elite, and Linear operators were the default choice for custom builders. When those operators fail, the homeowner needs a technician who has actually opened one up before. We have.
Every job we complete carries our written 90-Day Done Right Promise. If the gate isn’t right, we return and make it right. No paperwork gymnastics, no arguing. We also settle the price before a single bolt leaves the truck, so the number you approve is the number on the invoice. Homeowners in The Highlands and Lakeview have called us after a generalist handyman swapped a gear and left a gate that opened halfway on good days and not at all on bad ones. We’re the second call. It’s usually the last one.
Gate Repair Services We Offer in Trophy Club
Gate Repair
From sagging double-swing estate gates to slide gates that bind on their track, we repair the full steel-and-motor system, not just the symptom. A gate that scrapes the driveway in Trophy Club is often post movement, not a hinge problem. Learn more about our Gate Repair in Trophy Club.
We handle broken hinges, cracked welds, bent pickets, failed wheels, and control boards. Most repairs are completed in a single visit because our trucks carry the parts and steel stock this community’s gates actually use.

Gate Installation
New construction, tear-outs, or replacing a gate that Hurricane-force winds finally finished off. We measure, fabricate, and hang gates that match the scale of Trophy Club lots. Learn more about our Gate Installation in Trophy Club.
Because this is an HOA-governed community, we pay close attention to powder-coat color, picket profile, and hardware finish. A mismatched section will earn you a violation letter even if it swings perfectly.

Gate Motor & Opener
If your gate opens three feet and stops, or the remote works only when you’re standing on the sensor pad, the operator is the likely fault. We service FAAC, BFT, Linear, and Viking units, among others. Learn more about our Gate Motor & Opener in Trophy Club.
Control board failures from the 2021 freeze are still surfacing in Trophy Club. When the board goes, we replace it with a properly matched unit and reprogram every remote and keypad on the property.

Gate Access Control
Keypads, card readers, intercoms, phone-line entry, and app-based systems. We wire them correctly so they survive North Texas weather instead of dying in the first hard rain. Our team is trained on nine major automation brands, which means the access panel we install actually talks to the operator you already have.

Gate Parts & Welding
When a section of wrought steel fails, we weld it in place and match the finish. Our fabricators work with tubular steel, ornamental iron, and aluminum, and we’re equipped to reproduce picket profiles that blend with the original gate. If your gate was built in the 1990s, we can usually match the existing steel without replacing the whole leaf.

Neighborhoods We Serve in Trophy Club
Crews reach most Trophy Club addresses within a few hours of your call. We’re routinely working in:
- The Highlands
- Hogan’s Glen
- Lakeview
- Indian Creek
- Turnberry Ridge
Wherever the driveway, we’ll be there when we say. (254) 330-8718.
Why Trophy Club’s Climate & Housing Affect Gate Repair
Trophy Club sits on Blackland clay, the shrink-swell soil that gave North Texas its reputation for cracked foundations. Every spring, that clay drinks the rain and expands. Every dry August, it contracts. Your gate posts sit in that soil, which means they heave and lean on a seasonal cycle. A gate that clipped its latch in March may drag the driveway by July. No hinge adjustment fixes that permanently. The post has to be reset and re-poured, and in this community, the repair has to land without cracking the irrigation lines that run alongside nearly every driveway.
The February 2021 freeze did a number on Trophy Club’s gate electronics. Control boards that sat cold for four days developed hairline solder fractures. Aluminum actuator arms cracked. Underground junction boxes took on water from melted ice and never dried out properly. We’re still replacing freeze-damaged operators in this community four years later. And our technicians will tell you the same thing on every visit: in Trophy Club, when a gate works intermittently, check the wire before you condemn the operator. Direct-burial cable from the early-90s building boom is now brittle and corroded, and sometimes the only real fix is trenching new conduit. We’ll scope that work honestly and quote it before we start.
Pricing for Gate Repair in Trophy Club
Gate repair in Trophy Club typically ranges from $180 to $650. Hinge replacement and steel straightening land at the lower end. Full operator replacement on a Viking or Linear swing-gate unit runs higher, especially when a new control board and remotes are required. Here’s a practical breakdown:
- Hinge adjustment or replacement: $180-$280
- Weld repair on steel pickets or frame: $220-$450 depending on extent
- Operator replacement (motor, board, remotes): $450-$1,800 based on brand and drive type
- Post reset and re-pour (clay heave repair): $350-$800 per post
- Seasonal tune-up: $89 (standing offer)
Every quote is written, agreed upon before work starts, and backed by our 90-Day Done Right Promise. We also offer $50 off any repair over $250 and a free second opinion on any written estimate from another company. Seniors and veterans always receive 5% off, no coupon needed.
Service Area - Cities Near Trophy Club
If you’re just outside Trophy Club, we’re nearby. We serve home owners in Keller, Aurora, Haslet, and Newark with the same phone number and the same written guarantee.
Serving Trophy Club, TX - Our Local Coverage Area
We’re based in the Trophy Club area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Trophy Club
In most cases, yes. We dispatch crews to Trophy Club daily, and a technician typically reaches your driveway within a few hours of your call. If the repair requires a part that’s not on the truck, we’ll tell you before we leave the shop, not after we arrive. Call (254) 330-8718 and we’ll give you a straight answer.
It depends on how far they’ve moved and what’s still sound. Trophy Club’s clay soil heaves posts seasonally, and if the concrete footing has cracked or shifted, we may be able to reset the post in a new pour and re-hang the gate. If the steel is bent or the post is rusted through at the base, replacement is the correct call. Either way, you’ll get a written price before we start.
Yes. We’re familiar with Trophy Club’s HOA standards for powder-coat colors, picket profiles, and hardware finishes. We match repair work to the existing gate and to the community’s written guidelines so you don’t get a violation letter after the gate is working again. If your HOA needs documentation, we’ll provide it.
A gate opener replacement in Trophy Club usually falls between $450 and $1,800 depending on the brand, drive type, and whether the control board and remotes are included. Operators on larger estate lots in neighborhoods like Hogan’s Glen or The Highlands tend toward the higher end because of gate weight and cycle frequency. Call (254) 330-8718 for an exact quote, free of charge.
We do. A significant share of intermittent gate failures in Trophy Club trace back to corroded or brittle direct-burial wiring installed during the 1990s construction boom, not to the operator itself. We can test the line, locate the fault, and trench new conduit if needed. We’ll quote that work openly, and the job is covered under the same 90-Day Done Right Promise.
Call Ironworks Gate Co. for Gate Repair in Trophy Club
When your gate doesn’t open, you don’t need a brochure. You need a technician who will pick up the phone, show up on time, and fix the gate at a price you approved in advance. That’s the job. We’ve been doing it for over 42 years, and we’re not going anywhere. Ironworks Gate Co. is led by Victor Salinas, and every job in Trophy Club gets the same treatment: krafted right, every time, your home first, standing behind it.
Call (254) 330-8718 for a free estimate on any gate repair in Trophy Club, TX. A person answers, 24 hours a day.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Trophy Club and surrounding North Texas communities.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Trophy Club Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher
Before
After
Before
After
Before
After