Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Hurst, TX
If your gate is sagging, dragging, or refuses to open, you’re not alone. Hurst gates take a beating from the soil, the sun, and the ice, and we fix them every week. Gate repair in Hurst typically runs $180 to $340 for the most common issues, and most jobs are done in one trip. We answer the phone around the clock, and a real person will be there when we say. Call (254) 330-8718 and tell us what the gate is doing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Hurst Homeowners Choose Ironworks Gate Co.
Hurst is a town of established neighborhoods, and the older the neighborhood, the more gates we have rebuilt there. Homeowners in Shady Oaks and Meadowbrook have been calling us for years, often after a handyman or a fence company made the problem worse. The work comes with the 90-Day Done Right Promise, written on every job: if something is not right, we come back and make it right. No paperwork, no argument, no charge.
Victor Salinas runs Ironworks Gate Co., and he has kept the same rule for over four decades: a gate gets fixed correctly the first time, or we are not done. Our technicians are background-checked, uniformed, and trained on nine automation brands, from LiftMaster to Mighty Mule. A live person answers the phone 24/7, not a call center. When a gate will not close at eleven at night in Hurst, you will hear a human voice.
Gate Repair Services We Offer in Hurst
Gate Repair
This is the bread and butter of what we do. Sagging wooden gates, bent steel frames, stripped hinges, rotten posts, latch plates that will not line up. Most repairs in Hurst are completed the same day we arrive. Learn more about our Gate Repair in Hurst.
Gate Installation
A new gate in Hurst needs a frame that will hold square through the clay-soil cycle, not just a pretty board on a bent post. We build and hang gates for the way this ground moves. Learn more about our Gate Installation in Hurst.
Gate Motor & Opener
From a dead keypad to a motor that grinds but will not move, we service FAAC, Elite, LiftMaster, and the other major brands without making you wait on a part that was ordered wrong. Learn more about our Gate Motor & Opener in Hurst.
Gate Access Control
Keypads, intercoms, vehicle sensors, and ground loops, wired in clean and set up so the gate opens when it should and stays closed when it should not. Access control keeps the gate from becoming a neighborhood shortcut.
Gate Parts & Welding
We fabricate and weld on site. If a hinge tab has torn off a steel gate, we weld it back stronger than the original. If a wood gate has split around the hinge screws, we repair the rail properly, not with longer screws into the same ruined wood.
Neighborhoods We Serve in Hurst
We work across Hurst, but these are the areas where we are out on calls most often. Response is typically same-day or next-day for non-emergency work in Hurst.
- Shady Oaks
- Meadowbrook
- Bellaire Park
- Hurst Park
- Mayfair
Why Hurst’s Climate & Housing Affect Gate Repair
Hurst sits on the North Texas black clay, the Vertisol soil that swells when it rains and shrinks hard in the summer. That is the reason gates here do not just sag slowly, they throw themselves out of square. In the older neighborhoods, especially around the 76053 zip code, the concrete set posts that went in during the 1960s and 1970s are still down there. They move. The gate stays bolted to them and moves, too. By August, after a dry stretch, gates that were hung square in the spring are dragging on the latch side and wedging against the post on the hinge side. In the 76054 zip, where the newer homes were built, the problem still shows up, just a little later in the life of the gate.
Then there is the ice. A North Texas ice storm puts a coat of freezing rain across a wooden gate panel and the weight doubles. Hinge screws strip out, frames bend, and automatic openers burn up trying to move a stuck gate. In the summer heat, steel frames expand and wood checks. A gate in Hurst lives in three seasons at once: wet clay, dry heat, and ice. We repair for all three.
Pricing for Gate Repair in Hurst
The price is set before the first bolt comes out. Most repair work in Hurst falls in these ranges:
- Hinge replacement or alignment: $140-$260
- Sagging wood gate reinforcement: $180-$340
- Steel gate straighten and weld repair: $220-$450
- Opener diagnosis and minor repair: $120-$280
- Full opener replacement, including labor: $650-$1,800 depending on brand and type
You will hear the number before any work starts, and the number will not change at the end. That is a square deal. There is also $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans. The $89 seasonal tune-up catches problems before the gate fails in front of you.
Service Area - Cities Near Hurst
If your home is just outside Hurst, call anyway. We work in Bedford, North Richland Hills, Colleyville, and Haltom City as well. Same crew, same written promise.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hurst
Most gate repairs in Hurst cost between $180 and $340, with more involved repairs like steel welding or opener replacement running $450 to $1,800. The price is quoted and agreed before work starts, so there are no surprises. Call (254) 330-8718 for an exact quote, free.
Yes, for most repair calls. Hurst is close to our dispatch, and the most common problems like a sagging gate, a stripped hinge, or a dead opener are fixed in a single visit. Call (254) 330-8718 and a live person will tell you what is available today.
The black clay soil under Hurst dries and shrinks in the summer heat, which moves the posts and throws the gate out of square. Gates on original 1960s and 1970s concrete posts are especially prone, since the posts have been moving for decades. We rebuild and reinforce frames to hold through the cycle. Call (254) 330-8718 and we will look at your specific gate.
Yes. In Hurst, where many gates are automatic or slated to become automatic, we run the power, set the safety edges, and wire the control board properly. The work is done to current code and finished clean. Call (254) 330-8718 for a free measure and written price.
A new gate installation in Hurst includes removing the old gate, setting or repairing posts as needed, fabricating or assembling the new gate, hanging it square, and testing the full swing. If it is automated, the package includes the opener, wiring, keypad or remote programming, and safety edges. The price is fixed before we begin. Call (254) 330-8718 for a free estimate on your project.
Call (254) 330-8718 any time, day or night. A live person answers. We will set a time, show up when we say, and give you the price before the work starts. The gate will close like the day it was hung.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hurst and the Mid-Cities with old-fashioned gate work and modern automation.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hurst Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram