Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Haslet
Gate installation in Haslet runs two different jobs depending on which side of the city you live on. In the master-planned communities along Highway 156 and the Alliance corridor, it’s typically replacing a builder-grade automated opener on an ornamental iron driveway gate that’s hitting its 10-15 year service ceiling. On the acreage lots off Blue Mound Road and Harmon Road, it’s more often welding up a heavy pipe gate and adding automation for the first time. Either way, a new gate in Haslet starts with a free on-site measure and a written price before any work begins. Call (254) 330-8718 to schedule yours.
Why Ironworks Gate Co. Is Haslet’s Preferred Gate Installation Company
We’ve spent 42 years doing one thing: gates. That focus matters in Haslet, because the work here shifts by the mile. One stop is a powder-coated steel driveway gate in a subdivision like Haslet Estates, where the original builder’s operator was sized to the price sheet, not to the weight of the gate hanging on it. The next stop is a welded pipe and panel gate on a three-acre horse property where there’s no automation at all, no conduit in the ground, and a post set in black clay that’s been heaving for thirty years. Victor Salinas leads crews who have seen both jobs hundreds of times, and the written 90-Day Done Right Promise applies to every one of them.
A live person answers our phones around the clock. When a Haslet homeowner calls at 6 a.m. because their gate won’t open and they can’t get the truck out, they talk to a person, not a queue. Our technicians are background-checked and uniformed, trained on nine automation brands, and they work in your driveway the way they’d work in their own mother’s. We quote the price before a single bolt comes off, and that’s the price you pay. No add-ons, no end-of-job invoice surprises.
Our Gate Installation Services in Haslet
We handle the full scope of gate work in Haslet, from footings and posts to motors, keypads, and safety photocells. Here’s how we approach the jobs we see most often in this part of North Tarrant County.
Driveway Gate Installation in Haslet
Most automated driveway gates in Haslet’s newer subdivisions are now due for their first full operator replacement. The original builders installed hardware that worked fine on day one but was never sized for a powder-coated steel gate that weighs 400 pounds or more. We install and program operators from FAAC, BFT, and Linear, matched to the actual weight and cycle count of the gate. The price is agreed before work starts, and the 5% senior and veteran discount is always available.
Swing Gate Installation in Haslet
Swing gates on Haslet’s clay soil tend to heave out of plumb within a couple of seasons if the posts weren’t set deep enough. We dig to the correct depth for the soil type, install the hinge posts with enough concrete and rebar to resist the seasonal movement, and fit the gate with sag correction before the operator goes on. In Haslet, we see undersized motors on heavy ornamental iron gates more than anywhere else in the Alliance corridor. Gate Installation of this kind is our daily work.
Sliding Gate Installation in Haslet
Sliding gates work well on Haslet’s acreage properties and on suburban lots where the driveway has enough parallel run. The trick on clay soil is the track and the post footings. When the ground heaves after a wet winter, a poorly anchored track will shift and the rack will bind. We pour footings below the active shrink-swell zone, set the track straight, and run the conduit for the motor, keypad, and safety edges in one pass.
Pedestrian Gate Installation in Haslet
A separate pedestrian gate is a practical addition on any property where the driveway gate cycles a dozen times a day. Every opening is wear on the motor. We build steel pedestrian gates to match the driveway gate, hang them on posts set properly for Haslet’s soil, and install them with self-closing hinges and a keyed or keypad entry. It’s one less cycle on the main operator, which adds years to its life.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haslet
We’re certified and trained on nine gate-automation brands, including FAAC, BFT, and Linear, the three most common on Haslet properties from the 2005-2015 buildout. We stock the common replacement boards, limit-switch assemblies, and gearboxes down in the metro office so a Haslet job doesn’t wait for a part to ship from out of state. If your opener is a Viking or a DoorKing, that’s covered. We service whatever is on the driveway, and if the motor failed due to age rather than a specific fault, we’ll tell you straight.
Common Gate Installation Problems We See in Haslet Homes
- Builder-grade operators burning out right at the 10-year mark. Haslet Estates and the surrounding 2000s-era developments went up fast, and many of the original gate motors were sized for the least expensive option, not the gate’s actual weight. We see burned windings and stripped transfer gears on motors that never should have been fitted to those gates.
- Manual pipe gates on acreage lots automated with no real footing. The previous owner may have welded a nice pipe gate and set it in a shallow concrete collar. The first serious wet-to-dry season in the clay heaves the post and the gate begins to drag. We cut the old post, set a new one deep, and weld the hinge reinforcement the gate should have had from the start.
- Surface-mounted wiring that fails in North Texas ice storms. When the original build skipped an underground conduit run, the result is usually a cable draped along the fence line or buried two inches down. The February 2021 freeze seized gearboxes and cracked housings on operators that had never been serviced since installation. Any new install we do includes a proper conduit run below the frost line.
- Swing gates that sag and drag on the driveway. Haslet’s shrink-swell clay works on posts every season. A gate that moved fine in October drags in April. The fix is a sag-correction kit, and on most jobs we add one at install rather than waiting for the first heave to pull the gate out of plumb.
Pricing for Gate Installation in Haslet, TX
We quote every Haslet job before we touch anything, in writing, and that number doesn’t change. A new automated driveway gate with a steel frame and a FAAC or BFT operator typically runs $3,800 to $7,200 in Haslet, depending on gate width, material gauge, and whether we’re reusing existing posts or setting new ones in concrete. Adding automation to an existing pipe gate on an acreage lot runs $1,800 to $3,400, which includes the operator, keypad, safety photocells, and a new conduit run. A slide gate install with a poured footing and track runs $4,200 to $8,000. A simple pedestrian gate installed on a steel frame runs $750 to $1,500. The written quote you approve is the price you pay. Call (254) 330-8718 and we’ll measure the opening, check the soil and access, and put a number in your hand the same day.
We Also Serve Cities Near Haslet
Our crews work throughout northern Tarrant County, and Gate Installation in Haslet is one part of the area we cover daily. If you’re in Keller, North Richland Hills, Newark, or Southlake, the same team and the same written 90-Day Done Right Promise apply. We dispatch from the Dallas-Fort Worth metro office and arrive in Haslet prepared for the job, not prepared to look at it and come back.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Haslet
Because they were all installed within a few years of each other during the 2005-2015 building wave, and the original operators were built to a budget. Haslet’s heavy ornamental iron gates run 250 to 400 pounds, and the builder-grade motors pushing them were frequently rated for less. At ten to fifteen years, the windings burn out, the gears strip, or the control boards die. When a wet spring causes soil movement, the last few weak motors fail in clusters across the same subdivision. If yours is struggling, call (254) 330-8718 for a replacement quote before it strands you outside your own driveway.
Yes, and it’s one of the most common jobs we do on the rural edges of Haslet. The key is the post footing. If the existing hinge post is set in shallow concrete, we’ll pull it, drill a deeper hole, and pour a footing that can hold the gate and the operator through wet and dry cycles. Then we run new conduit, mount the operator, install a keypad, and wire in the safety photocells. Expect $1,800 to $3,400 for the complete job, quoted in writing before we start.
The fix is a sag-correction kit plus re-tensioning or replacing the hinge hardware, and on some gates, welding a steel reinforcement channel to the frame. The sag is almost always caused by the combined action of clay heave on the posts and the gate’s own weight working against the hinge joint over years. We correct the geometry, reinforce the frame if needed, and set the operator to cycle evenly on both leaves. A free measure at your home will give you the exact number.
Every new automated gate installation in Haslet must include entrapment protection under the UL 325 standard. That means at minimum two independent safety systems, typically a set of photo-eyes across the opening and a reversing edge or obstruction sensor on the gate itself. We install and test both on every job, and we’ll show you how to test them yourself. The 90-Day Done Right Promise covers the whole works.
Cold usually isn’t the primary cause, but it finishes the job. What actually happens in Haslet is that years of shrink-swell clay movement have slowly pulled the gate out of alignment, or the gearbox grease has broken down and thickened, and the motor has been working harder every year. An ice storm adds resistance and cold-thickened lubricant, and the motor burns out. In Haslet Estates recently, we replaced a builder-grade LiftMaster slide operator that had sheared its rack and pinion after a wet winter heaved the post footing. Our crew poured a new, deeper concrete footing, re-squared the gate, ran a fresh conduit run for a loop detector and safety photocells the original build never included, then reprogrammed the keypad entry for the homeowner. If yours died in the cold, the cold wasn’t the whole answer. Call (254) 330-8718 and we’ll figure out what failed and what it costs to fix it for good.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haslet and the surrounding North Tarrant County communities for over four decades.