Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in New Fairview, TX
A gate that won’t open or close out here isn’t a minor annoyance. It means a long walk down a gravel drive in the dark, livestock that could wander toward FM 407, or a vehicle stuck on the wrong side of the fence. Most gate repairs in New Fairview come down to one of three things: a post that’s shifted in Wise County clay, an operator that’s burned out from caliche dust, or a hinge that’s finally given up after twenty years of Texas wind. We fix all of it, usually in one visit. Call (254) 330-8718 and a live person picks up, day or night.
We’re Ironworks Gate Co., and we work on driveway and estate gates exclusively. That’s the whole trade for us, not a side job. Dispatch for our New Fairview crews is coordinated from the brand’s Dallas-Fort Worth office, so a technician familiar with ranch-property gates can be at your driveway quickly when you need us.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why New Fairview Homeowners Choose Ironworks Gate Co.
Victor Salinas leads our team, and he’s built this company on a simple standard: the 400th job gets the same care as the first. Our technicians are background-checked and uniformed. They arrive knowing how to work in a customer’s home the way they’d work in their own mother’s. And every job, no matter how small, carries our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.
We serve acreage properties throughout the area, from the ranch estates off County Road 4225 to the horse properties along Farm Road 2264 and the newer custom homes near Rhome and points east. Homeowners in New Fairview call us back because the gate that was sagging last spring is still closing square this winter. That’s the whole point.
We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whatever opener is on your driveway, we’ve seen it before and we carry the parts to fix it on the first trip.
Gate Repair Services We Offer in New Fairview
Gate Repair
Sagging swing gates, slide gates jumping the track, broken hinges, cracked welds, and posts leaning out of plumb. If it’s made of steel or iron and it’s supposed to move, we repair it. Most repairs are completed in a single visit, with the price agreed before we turn a bolt.
Learn more about Gate Repair in New Fairview.
Gate Installation
A new gate starts with a free measure and a written price before any work is scheduled. We build and install pipe-and-panel welded steel gates, ornamental iron swing gates, and slide gates sized for a real New Fairview driveway, not a suburban lot.
Learn more about Gate Installation in New Fairview.
Gate Motor & Opener
Openers die from dust, ice, and age. We repair, replace, and upgrade operators from LiftMaster, DoorKing, Elite, and Mighty Mule, among others. Solar-powered units and battery backups on remote driveways are routine work for us.
Learn more about Gate Motor & Opener in New Fairview.
Gate Access Control
Keypads, intercoms, vehicle sensors, and remote systems for a single gate or an estate entrance. We run the wire, mount the equipment, and program it so it works every time. No callbacks, no mystery gremlins.
Gate Parts & Welding
Hinges, rollers, track, chain, brackets, and custom steel fabrication. If a part is worn, broken, or missing, we repair or fabricate it in place. Welding is done properly, not cosmetically.
Neighborhoods We Serve in New Fairview
We work across the full New Fairview area, from the acreage tracts west of town toward the Wise County line to the ranch properties east of FM 2264 and the homes along County Roads 4225, 4227, and 4260. Typical response for repair calls in this area is same-day or next-day, depending on the season and what’s already on the schedule.
- Ranch estates along FM 2264
- Acreage near County Road 4225
- Properties east toward Rhome
- Custom homes off County Road 4260
- Equestrian properties in the greater New Fairview area
Why New Fairview’s Climate & Housing Affect Gate Repair
New Fairview is a rural acreage community in Wise County where the dominant residential form is horse properties and ranch estates on 5 to 20+ acre lots. Gate repair work here is almost entirely single-property automated driveway gates, not shared HOA community gates that define the trade in neighboring suburbs like Justin or Rhome. Nearly every property has a swing or slide gate at the end of a long gravel or caliche driveway, which makes residential driveway gate operators the bread-and-butter job rather than the exception.
That matters for repair. The expansive clay soils common in Wise County heave and contract dramatically through wet and dry cycles, causing gate posts to lean and shift seasonally and gates to rack out of alignment. We see the same properties come back every few years with a leaning post or a gate that won’t latch, and it’s rarely a bad install. It’s the ground moving. The fix is resetting the post and re-hanging the gate square, which we do regularly out here.
The heavy caliche and gravel driveways also kick up constant dust and debris. That dust accelerates wear on chain drives, limit switches, and photo-eye sensors. Identical operator models on paved suburban driveways will go years between cleanings; on a New Fairview caliche drive, they foul out noticeably faster and need more frequent sensor realignment and cleaning. We factor that in when we service a unit so you’re not paying for a repair that misses the actual cause.
Pricing for Gate Repair in New Fairview
A typical gate repair in New Fairview runs from about $180 for a straightforward hinge or latch fix to roughly $650 for a post reset and re-hang on a large swing gate. Opener repairs tend to land between $240 and $520 depending on whether it’s a limit switch, a control board, or a full replacement. Every price is quoted and agreed before any work starts, and you’ll know the number before we touch the gate.
We also keep standing offers on the table: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (254) 330-8718 for an exact quote. Estimates are free.
Service Area - Cities Near New Fairview
We serve New Fairview and the surrounding Wise and Tarrant county communities, including Keller, Aurora, Haslet, and Newark. If you’re on the edge of our service area, call and we’ll tell you straight whether we can get to you this week.
Serving New Fairview, TX - Our Local Coverage Area
We’re based in the New Fairview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in New Fairview
Most New Fairview gate repairs cost between $180 and $650, depending on whether the issue is a hinge, a post, the operator, or the track. We quote the exact price before any work starts, and we honor it. Call (254) 330-8718 for a free estimate.
In most cases, yes. Repair calls in New Fairview are typically handled same-day or next-day. A live person answers the phone 24 hours a day, so call (254) 330-8718 and we’ll give you a straight answer about when a technician can be there.
Yes. Solar-powered operators and battery backup units are standard on New Fairview acreage driveways without easy grid power, and we repair and replace them regularly. The February 2021 ice storm destroyed a lot of solar units in Wise County, and we’ve been replacing those systems ever since.
A full installation includes a free measure, a written price, the gate and posts, the operator and safety edges, and any access control you want from a keypad to a full intercom. We also handle the power run and will tell you before we quote whether your driveway needs solar or a line from the house. No surprises in the number.
Yes. Both are common in New Fairview. Swing gates suit wide caliche driveways with room to arc, while slide gates work well on properties where the drive slopes or space is tight. We repair and install both, and we’ll recommend the right one for your specific driveway rather than selling what’s easiest for us.
Call Ironworks Gate Co. for Gate Repair in New Fairview, TX
When your gate stops working, call (254) 330-8718. A real person answers, day or night. We’ll schedule a technician for your New Fairview property, quote the price before we start, and stand behind the work with our written 90-Day Done Right Promise. This is the last gate company you’ll need to call.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving New Fairview, TX and the surrounding Wise County communities.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What New Fairview Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher