Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Haslet, TX | Ironworks Gate Co.
Ghost Controls gate repair in Haslet comes down to understanding two things that don’t show up in a manual: black clay soil that heaves posts out of plumb, and the fact that hundreds of AXDP operators installed during the 2005-2015 buildout are now failing on the same timetable. Ironworks Gate Co. provides independent Ghost Controls service across Haslet, fixing the specific wear patterns we see on TSS1, AXDP, RJO, and DSL series openers here in North Tarrant County. If your Ghost Controls gate is grinding, auto-reversing for no reason, or dead at the keypad, call us at (254) 330-8718 and we’ll get a technician to your driveway.
Why Haslet Residents Choose Us for Ghost Controls Service
We’re not a general handyman service that happens to work on gates. Ironworks Gate Co. has been handling Gate Repair - Haslet and installing driveway gate systems for over 42 years, and our technicians are trained on nine automation brands including Ghost Controls. Victor Salinas, our owner and lead gate repair technician, grew up in Keller and spent years working alongside gate and fence tradesmen across the DFW area before founding Ironworks. He learned metalwork and low-voltage electrical systems at Tarrant County College, and he’s the person Haslet neighbors call when a Ghost Controls motor quits the morning of a family gathering.
What that means for your Ghost Controls opener: we diagnose the actual failure, not the symptom. A gate that won’t hold closed might be a clutch issue, or it might be a hinge post that shifted two inches in the clay. We figure that out on the first visit because we’ve seen every residential Ghost Controls model in operation across Haslet’s mix of suburban estate gates and rural pipe gates. Our work is backed by the 90-Day Done Right Promise, in writing. No paperwork, no arguing. If it’s not right, we come back and make it right.
Common Ghost Controls Gate Repair Problems We Solve in Haslet
These are the failures we see week after week in Haslet, tied to our climate and soil:
- Clutch slippage on AXDP dual gate openers. After multiple North Texas summers with triple-digit days, the gear reduction on AXDP operators gets heat-soaked and the clutch starts slipping. The gate opens halfway, then stalls. We replace the clutch assembly with OEM Ghost Controls parts and reset the torque so the gate holds position.
- Control board corrosion from condensation and irrigation overspray. Haslet’s humid springs and the irrigation systems on quarter-acre lots mean non-sealed enclosures collect moisture. We see corroded terminals and blown relays on Ghost Controls boards where sprinkler heads spray the operator post. We stock OEM control boards for same-week repair.
- Gate sag and hinge binding on TSS1 armature mounts. Haslet’s shrink-swell clay moves posts throughout the year. A TSS1 single swing operator that was aligned in March can be binding by August because the post moved. This causes intermittent auto-reverse faults where the gate starts closing, then kicks back open. We reset the hinge posts and re-shim the armature.
- Stripped travel limit gears on RJO slide motors. When North Texas ice storms hit, rack teeth on slide gates bind after metal contraction. Continued operation strips the travel limit gears inside the RJO motor. We replace the limit assembly and re-lubricate the rack so the operator isn’t fighting the track.
- Dead photo eyes and safety edge failures. Haslet’s dust and pollen seasons coat photo eye lenses, but we also replace failing safety edges on gates that service horse properties and see constant use. Ghost Controls systems won’t close if the safety circuit is compromised, which is exactly what the system is supposed to do.
Ghost Controls Service in Haslet: What Local Conditions Mean for Your Equipment
Here’s the information you won’t find on a generic Ghost Controls repair page. Haslet’s 2005-2015 residential boom installed hundreds of Ghost Controls AXDP operators on cast-iron driveway gates in communities like Haslet Estates. Those units are now crossing the 10-15 year threshold simultaneously. That means one wet spring with clay soil heave can trigger a wave of alignment failures in the same Haslet Estates streets within days of each other. We saw this happen directly. Our tech rolled to a home in Haslet Estates last March after a Ghost Controls AXDP swing gate started grinding and kicking back. He found the gate out of plumb from winter-to-spring post heave, so he reset the hinge posts with a deeper concrete collar, replaced the worn armature clutch, and recalibrated the auto-reverse. The gate now cycles quiet and holds closed even after another rain. When the black clay moves, every gate on the street moves with it, and the ones with 15-year-old operators fail first.
Ghost Controls Models & Products We Service in Haslet
Our crews work on every residential Ghost Controls model line: the AXDP series dual gate openers, TSS1 series single swing gate openers, RJO series slide gate motors, and DSL series heavy-duty slide gate openers. We keep OEM Ghost Controls control boards, armature assemblies, and photo eye kits in stock for same-week repairs. When OEM lead times stretch beyond two weeks, we use quality aftermarket capacitors and limit switches that meet or exceed the original specifications. We only recommend full operator replacement when a rebuild exceeds 60 percent of a new unit’s cost, and we quote both options clearly so you can decide. Ironworks Gate Co. is an independent service provider, not a manufacturer-affiliated or authorized Ghost Controls dealer. That independence means we fix what’s actually broken instead of steering you toward a new unit. Browse our Ghost Controls sales & service page for more details on the brand work we do.
Ghost Controls Service Pricing in Haslet
Ghost Controls gate repair in Haslet typically runs between $180 and $340 for common failures like clutch replacement, control board swaps, and limit switch repairs. Full operator replacements on AXDP dual gate systems run higher, generally $850 to $2,500 installed depending on the model and gate size. What drives the cost: whether we’re repairing a component or replacing the operator, how far out of alignment the gate has drifted, and whether the hinge posts need concrete work from clay heave. Every job gets a written estimate before we turn a single bolt. The price you approve is the price you pay. Call (254) 330-8718 for a free estimate on your Ghost Controls repair in Haslet, and ask about our $50 off any repair over $250.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Haslet
Heavy rain saturates Haslet’s shrink-swell clay and causes gate posts to heave upward, which knocks the gate out of alignment and makes the AXDP armature grind against the mounting bracket. We reset the posts with a deeper concrete collar and re-align the operator so the gate swings clean. If you hear grinding after a rain, call (254) 330-8718 before the clutch wears through.
Yes. Rural pipe gates on Haslet’s ag-exempt acreage see different wear than suburban driveway gates, usually rust at the hinge welds and seized pivot points from years of no lubrication. We free the hinges, reweld where needed, and service the Ghost Controls operator. Tell us what the gate is doing and what it’s not doing, that’s usually all we need to get started.
We quote both options before any work begins. As a rule, if the rebuild cost exceeds 60 percent of a new unit, we recommend replacement. If the motor runs but the gate won’t move, that’s often the clutch. If the board is dead but the motor is fine, that’s a board swap. We tell you what we found and what each fix costs, and you decide. Estimates are free.
Yes. For rural Haslet properties where running line voltage to a gate 200 feet from the house isn’t practical, we install battery backup systems and solar panels as part of our Gate Installation in Haslet to keep Ghost Controls openers running through North Texas storms and summer heat. These systems pair with the existing operator and need the same upkeep as the motor itself.
Cold weather contracts the gate metal and the rack teeth on the slave side, which throws off the travel limits on the AXDP master unit. We re-set the travel limits and re-lubricate the rack. Usually that’s a repair, not a replacement. If the limit gears are stripped from repeated ice-storm operation, we replace the gear set in the motor. Call (254) 330-8718 for a free estimate.
Service Areas Near Haslet
Ironworks Gate Co. serves Haslet and the surrounding North Tarrant County area. We regularly dispatch Ghost Controls technicians to Ghost Controls service in Keller, Ghost Controls service in Aurora, Newark, New Fairview, and Pecan Acres. If you’re anywhere in the Haslet service area, we can usually have a technician to your gate the day you call.
Book Your Ghost Controls Service in Haslet Today
If your Ghost Controls gate is acting up in Haslet, don’t wait for the next rain to make it worse. Call (254) 330-8718 for a free estimate and a square deal: upfront pricing, background-checked technicians, and work backed by our 90-Day Done Right Promise. A live person answers 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haslet and North Tarrant County since 1984.