Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Keller
Gate access control in Keller usually means one of three things: the keypad on the post stopped talking to the operator, the remote in the car needs reprogramming, or the whole builder-era system has hit the end of its life and needs replacing. Most Gate Repair in Keller jobs we quote fall between $285 and $1,200 depending on what failed. The good news is that we carry parts for Keller’s most common systems on our trucks, and we price everything up front before a single bolt gets turned. Call (254) 330-8718 and a live person answers, day or night.
We have been working Gate Access Control in Keller long enough to know which subdivisions went up with what operators, which HOAs mandate iron, and how the clay soil under Keller moves more than most homeowners realize. That local knowledge matters when a gate that worked fine in April stops closing straight in August.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Access Control Company
Keller homeowners do not call us because they want a new hobby. They call because the gate stopped opening and now the car is stuck in the driveway or the street is suddenly visible to every passing car. Our Gate Access Control team has spent more than 42 years working on exactly this problem, and we have seen every way a Keller gate can fail. Victor Salinas leads a crew that treats your gate the way we would treat one hanging at our own shop: correctly, and without cutting corners.
We answer the phone live, 24 hours a day. Not an answering service. A person. That matters at 7 a.m. on a Tuesday when your gate will not open and you need to get to work. Keller callers reach someone who knows what neighborhoods like Shinbone Ridge and Bear Creek Estates are dealing with, and we schedule for Keller every day of the week.
Every job we finish carries the 90-Day Done Right Promise, in writing. If something is not right, we come back and make it right. No arguing, no paperwork, no exceptions. That is the standard on every gate, every time, and it is why Keller homeowners who call us once tend to keep our number in the drawer next to the remotes.
Our Gate Access Control Services in Keller
Keypad Entry
Keypad entry is the most common access point on Keller gates, and the most common failure point after about 12 to 15 years. Original builder keypads on homes from the late 1990s and early 2000s are now failing at the same time across the city. A replacement keypad module for a Keller estate gate typically runs $185 to $340 installed, and we can usually get it done in one visit. If the keypad works but the gate ignores it, the problem is often in the operator board or the wiring between the keypad and the motor, not the keypad itself.
Remote Control
A new remote programmed to your existing operator costs about $65 to $95 per unit on a Keller service call, including the visit. If you have lost all your remotes, we can also reprogram a new set and clear the old codes from the receiver, which matters if a remote went missing and you want to keep your property secure. Most Keller remotes use either fixed-code dip switches on older LiftMaster units or rolling code on newer models, and we carry both types.
Phone Entry
Phone entry systems let a caller ring a number, you answer, and you press a button to open the gate from wherever you are. These systems are common on Keller properties with long driveways, where walking to the gate is not practical. A basic phone entry add-on in Keller runs $420 to $750 installed, depending on whether the gate needs a cellular communicator or works on your existing landline. We set them up, test them, and show you how they work before we leave.
Card Reader
Card readers are less common on single-family Keller homes and more common on shared private drives or small HOA entrances. We install and service proximity card readers that mount on the keypad post and talk to the same operator. A card reader retrofit on an existing Keller gate typically starts around $380 and goes up depending on how many cards you need programmed and whether the operator has an available input.
Video Intercom
Video intercoms have become the most requested upgrade from Keller homeowners in the last few years. You see who is at the gate on your phone, you talk to them, and you open the gate without leaving the kitchen. Installation on a Keller gate usually runs $850 to $1,600, and the price depends on whether we can pull wire from the house to the gate or need wireless bridge equipment. For gated communities or a private lane with multiple homes, a video intercom gives you a record of every visitor, which many Keller residents want for peace of mind.
Smart Access
Smart access means controlling the gate from an app on your phone, with no remote to lose and no keypad code to remember. On Keller gates, we commonly tie smart access modules into LiftMaster, DoorKing, and Elite operators. A smart access retrofit starts around $600 and includes the module, the wiring, and pairing with your home’s Wi-Fi or a cellular connection if the gate is out of Wi-Fi range. It turns your phone into the remote, and you can set up temporary codes or open the gate from anywhere.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
Our Keller service trucks are stocked for the three brands we see most often in this city: LiftMaster, Elite, and DoorKing, plus Mighty Mule in Keller. Builder-installed LiftMaster operators from the early 2000s are everywhere in Keller subdivisions, and we keep the common boards, limit switches, and gear kits for those units on the truck. Elite and DoorKing operators also appear regularly on custom estate gates, and we are factory-trained on all nine major brands, so the repair we make on your first visit is the correct one, not a guess.
Common Gate Access Control Problems We See in Keller Homes
- Builder-grade operators failing at the 20-year wall. Keller’s building boom between roughly 1993 and 2012 put a lot of automatic gates on new homes, and those operators are now aging out together. The early-2000s LiftMaster and Elite boards are dying at the same time city-wide, which is why so many Keller homeowners call us within months of a neighbor getting a repair.
- Clay soil heaving hinge posts out of plumb. Tarrant County’s Blackland Prairie clay swells in wet cycles and shrinks in drought. That movement shifts gate posts, throws the gate out of alignment, and makes rack-and-pinion drive gears bind and strip. In Keller, we see this repeat every drought year, and the fix almost always means re-plumbing the post before the operator can work correctly.
- Cracked anchor bolts on operator pedestals. When a Keller gate’s post heaves, the anchor bolts holding the operator pedestal often crack. The motor looks failed, but the real problem is the footing. We re-anchor the pedestal, re-plumb the post, and only then set the new operator. Skipping that step means the new motor fails the same way the old one did.
- HOA restrictions locking homeowners into iron gates. In neighborhoods like Shinbone Ridge and Bear Creek Estates, the covenants mandate ornamental iron construction. You cannot swap to a lighter aluminum gate to reduce strain on the operator. The answer is correcting the alignment, reinforcing the hinge pins, and right-sizing the new operator to the existing gate’s weight.
Pricing for Gate Access Control in Keller, TX
Keller pricing for access control work is specific to the job, but here is what we see most often. A new keypad module runs $185 to $340. A replacement remote is $65 to $95 per unit. A phone entry add-on runs $420 to $750. A video intercom runs $850 to $1,600. A smart access retrofit starts around $600. If the operator itself has failed and needs replacement, Keller Gate Installation for a new swing gate operator typically runs $950 to $1,800 depending on gate weight and length, and we quote that before any work begins. You will know the price up front, in writing, and the price we quote is the price you pay. We also offer a free second opinion on any written estimate you have from another company, and $50 off any repair over $250. Senior and veteran customers receive 5% off, always. Call (254) 330-8718 for an exact quote.
We Also Serve Cities Near Keller
Our crews run daily through Keller and the surrounding towns. If you live in Haslet, North Richland Hills, Southlake, or Haltom City, the same team and the same written promise apply. Scheduling is coordinated from our Dallas-Fort Worth office, and the trucks are already in your area most days.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Keller
Because most of them were installed at the same time. Keller’s growth wave between 1993 and 2012 put thousands of automatic iron gates onto new homes, and those original operators are now reaching the end of their designed service life at the same time. The failure is predictable, not random, and it is made worse by the clay soil heaving posts and cracking operator anchor bolts. When we replace a Keller operator, we check the post alignment and footing before installing the new Gate Motor & Opener - Keller, which keeps the new unit from failing the way the old one did. If your gate is 15 to 20 years old and acting up, call (254) 330-8718 and we will tell you honestly whether it is a repair or a replacement.
Yes. Keller HOAs in communities like Shinbone Ridge and Bear Creek Estates commonly have deed restrictions that mandate ornamental iron construction. That means repair and reinforcement are your only options, not replacement with a lighter material. We work with that reality every week in Keller: we reinforce sagging frames, replace rusted hinge pins, and size the new operator to the gate’s actual weight so the system runs smoothly without swapping to aluminum. Call us at (254) 330-8718 and we will tell you what is possible under your HOA’s rules.
Most often it is a failed keypad module, a broken wire between the keypad and the operator board, or a relay on the board that has stopped responding. In Keller, where many keypads are the original builder units now 15 to 20 years old, the keypad membrane itself cracks and lets in moisture, shorting out the circuit. We test the keypad at the post, test the wire, and test the board, then replace only what failed. A typical keypad replacement in Keller runs $185 to $340, and we carry the common modules on the truck. Call (254) 330-8718 and we will diagnose it on the first visit.
For most Keller residential swing gates, a safety photocell pair is adequate and what most original installations used. A loop detector makes sense if you have a long driveway with frequent vehicle traffic or a shared private lane, because it opens the gate automatically as a vehicle approaches and holds it open while the vehicle passes. In Keller’s estate subdivisions, where driveways can run 200 feet or more, a loop detector is a practical upgrade we recommend on many replacement jobs. We can install either and will tell you which fits your gate and your traffic pattern. Call (254) 330-8718 for a straight answer.
Once a year is right for Keller’s conditions. The extreme heat in summer, the clay soil movement from wet-dry cycles, and the spring hail season all take a toll on hinges, operators, keypads, and wiring. An annual tune-up catches worn hinge pins and loose anchor bolts before the gate binds and strips a gear. We offer an $89 seasonal tune-up for Keller customers, and it covers the full mechanical and electrical check. The 400th job gets the same care as the first. Schedule one by calling (254) 330-8718.
Call Ironworks Gate Co. for Gate Access Control in Keller
If your Keller gate keypad is dead, your remotes stopped working, or you want video intercom and smart access added to a gate that has been manual for twenty years, call us. You will speak to a person, not a recording. We will schedule a visit, look at the gate, and quote you a price in writing before any work starts. The quote is the price, and the work is guaranteed in writing for 90 days. No surprises. Call (254) 330-8718 and get it done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the surrounding area.